I've a listview in which i'm binding data from objectdata source. I have a requirement where i've to allow edit/delete for only certail listviewitem which meets specific requirement. How do i dynamically set that some item can be only be edited not deleted thus only edit button/link should appear and vice-versa.
View 2 Replies
I have a listview set up in "flow" mode where the existing records are all on an extended page so you can scroll down to any record.
The InsertItem Template is in the first position, making it easy to insert a new record.
And one can scroll down the page to any record, click the edit button and update that record -- nice having everything on one scrollable page.
I am running into a problem with validations. I have validation controls restricting inputs for all the textboxes on the Insert Item template. They work fine. And on Item Inserted I am running a page validation:
Page.Validate()
If Not Page.IsValid Then
e.Cancel = True
End If
which works fine also.
The problem occurs when I scroll down to an existing record, and go to edit it. I have all the same validation constraints on the textboxes for the EditItemTemplate as I have on the InsertItemTemplate. But I cannot successfully do a page validation on updating the record. The code I am using on update is:
Protected Sub LVRentals_ItemUpdating(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.ListViewUpdateEventArgs) Handles LVRentals.ItemUpdating
Page.Validate()
If Not Page.IsValid Then
e.Cancel = True
End If
End Sub
This results in a Cancel even if there are no validation errors on the InsertItemTemplate because the Page.Validate() seems to be causing the InsertItemTemplate to think its fields should be filled out also.
Here is the code for a typical entry of the InsertItem Template:
[code]....
All the controls in the Edit Item template are part of ValidationGroup "edit1" and those of the InsertItem Template are part of ValidationGroup "edit2"
How can I get around receiving validation errors on the InsertItem Template when I am trying to validate just the EditItemTemplate when both are present on the page?
I need you assistance, Dynamic Delete LinkButton with CommandName=Delete gives me an error: Delete can only be called on a valid data item. nfact I am designing a Complex Grid using .Net 3.5 ListView Control with Scrollbar and Fixed Toolbar: This grid consist of 3 Tables:
1- footer
2- Toolbar Control
3- Scrolling Data Grid with Header
ListView give us only one ItemPlaceHolder to Bind Data as per LayoutTemplate, so I cannot able to manupulate my Toolbar Controls with ItemTemplate :(, therefore I decide to use ItemDataBound to add ImageButtons Dynamically using Init Page Event and I am able to get the result as you saw above:
ImageButton with funnel icon is with CommandName="Filter"
ImageButton with magnifier icon is with CommandName="View"
ImageButton with stop icon is with CommandName="Delete"
Now I can able to handle Filter and View with OnItemCommand Event but when I click Delete button I am getting an error as shown below: The grid used CSS I am sending you the HTML and code behind to resolved this problem: HTML CODE:
[Code]....
CODE BEHIND VB.NET
[Code]....
I created a ListView and attempted to delete a record using the delete button and native procedures. It failed and threw an error.Pass in a valid dictionary for delete or change your mode to OverwriteChangesIn researching this issue, it appeared there is a problem with the list view when deleteing and
ConflictDetection is set to
[Code]....
[Code]....
[Code]....
[Code]....
[Code]....
[Code]....
[Code]....
[Code]....
[Code]....
I am trying to populate the ListView using LinqDataSource data source but the issue I am having is.I need to load the listview on Search button click action.
IN the page_load I kept like this:
===========================================
LinqDS.Selecting += new EventHandler<LinqDataSourceSelectEventArgs>(LinqDS_Selecting);
protected void LinqDS_Selecting(object sender, LinqDataSourceSelectEventArgs e)
{
e.Result = ObjectDS;
}
=============================================
This works fine but this happens on page load,i want this binding to happen on button click?is there a way to do this?
I am trying to do this with many issues of data binding doubling the amount and not setting selectedValue on dropdownlist. I have read some posts and they help but I am missing a crucial piece. My problem is that my dropdownlist is doubling the amount of records for the dropdownlist. Instead of "YES;NO;SELECT A VALUE", I am getting "YES;NO;SELECT A VALUE;YES;NO;YES;NO". My database is correct with the UPDATE part but the rebind after update is failing horribly.
[Code]....
So, I have a button inside a listview:
[Code]....
with a commandName="confirm" and its CommandArgument the memberid from objectdatasource. I have create a code behind to put certain action to the said button..
[Code]....
But it has no effect. Did I make some mistake? I'm still new in this ASP.Net things.
I have a "report" the users can run it basically creates a simple gridview. In the gridview the user can click on a claim ID. The claim id is then passed via url querystring to a claim management page. The claim management page uses a listview to display the various claims and allow users to edit them. I want to use the claim id passed in the url to locate the listview row to open in edit mode, so the user can make changes / alterations to the claim.
View 4 RepliesI have a progam that need to use button to edit and delete in GridView.i put the edit button to ItemTemplate, update and cancel button in EditTemplatebut i don't know how to bind the method in the button click.his following are my html code:
<asp:GridView ID="gvDesc" runat="server" AllowPaging="True" AutoGenerateColumns="False"
Height="192px" Width="496px" DataKeyNames="TechCodeID" PageSize="5" CellPadding="4" ForeColor="White" GridLines="None" BackColor="White" CssClass="GridView">
<Columns>
[code]...
In one of my Web Page, there is one Modal Pop up, in which I am using Gridview Edit, Update, CancelEdit, Delete functionality.Main functionality is : If while deleting any of the Gridview Row, if only 1 row remains in Gridview (that row can be any row), then that row should not get deleted.Rest of Edit, Update, CancelEdit functionally is working fine.
I used below code for above:
C#:
protected void Page_Load(object sender, EventArgs e)
{
if (!Page.IsPostBack)
{
BindGrid();
[Code]....
problem is: When any last row is left in Gridview, its Delete button is disables that time (as per requirement and functionality). But when user clicks on Gridview "Edit" button, update section opens, and at that time "Delete" button gets Enabled, so that time user can delete the last row of Gridview which should not be done.I had fixed this problem for "Cancel" and "Update" button of Gridview using below line:
Response.Redirect(Request.Url.AbsoluteUri); but unable to fix it for "Edit" button of Gridview. If Last row is left in Gridview , and user clicks on Gridview "Edit" button of that row, then at that time "Delete" button should not get "enabled" it should remain "disabled"
I have a Listview in ASP.NET 3.5 page. When I press the Edit button it takes about 10 seconds before the screen is refreshed.
I have disabled ViewState and SessionState with no improvement to response time.
I'm looking for suggestions of what to look at to improve the response.
On the items in my listview, I have a button to allow for editing. The strange thing is, that the button only changes to editmode on the second click of the button, and then it doesn't load the data from the item. I have tried to debug this issue, and it does cause a postback on the first click, but nothing happens. Then on the second click, it fires a postback again and changes to the edittemplate, but without any data.
I databind my listview on
if(!IsPostback)
lv.DataSource=.....
I want to have a listview with conditional formatting on its edit and delete button.So, in nutshell, I want to check if the writer of post is equal to session("memberid"), then the edit and delete button will be appeared, else, it will show hidden.
[Code]....
roughly, i want and plan it to be sort of like that (as i found it at [URL]But I do not have any idea on how to make it whatsoever.So, if you guys have any idea (same as method above or different method), please show me the way.I have seen another forum, but I don't get it.
I have a ListView Which displays Customer, product, price, Quantity and comments from database.The User can either edit it or Insert new items. In Edit Item template and Insert item template, i need to add a image button next to the textbox, which when clicked, will display a pop up window with list of customers or products.I have been doing it with the normal aspx page with textboxes. I use click handler to pop up the windows.i'm not able to do with listview Please help to give a solution to it.How else can i add an image icon and click it and get the values back to the textboxes?i will post what i'm doing without listview first and then the part of the relavant code of Listview.
View 2 RepliesI wish to remove the edit button in the formview item template if a particular user is not authorized, how do you accomplish the removal?
View 6 RepliesI trying this solution in visual basic but it dosent work, im getting a error:
RegisterForEventValidation can only be called during Render();
In the line:Dim script As String = Me.ClientScript.GetPostBackClientHyperlink(btn, "", True)
[Code]....
I created 3 category table. categry1,categry2,categry3. product table.
And then use of gried view add ,edit ,update ,delete product . in product table.
In gridview retrive data from product table . i select categry from dropdownlist in gridview categry1, categry2, categry3 and save update dropdown list category value dynamically in product table. not define value static in source code.
When select category 1 change on selected index change categary 2 or 3.
In my code I used text box to ediit update delete. but here i will use dropdownlist.
Using a listview control for the first time... I need a button for each item, and of course I need to handle the click event for the buttons... upon clicking a particular button I of course need to know which item the button is associated with so the appropriate action can be taken...
In VS, I can't select the button and see my list of available events in the properties window like is normally done for controls outside of templates like this... what do I need to do?
I have a ListView in my system..
And inside it, there is a button called "Delete".
In the behind code, I tried to access the button control in the listview. However, the code keep looping non-stop..
The logic is the Delete button will only be visible by the current logged-in user. And I had already set the button as visible = false. I had set breakpoint to the line : Delete.Visible = true;. Once the execution reach here, it loop back to the first line again..
And Delete button remain invisble despite the execute visible = true statement..
Here is the code:
protected void ListView1_ItemDataBound(object sender, ListViewItemEventArgs e)
{
MembershipUser currentUser = Membership.GetUser();
Guid currentUserId = (Guid)currentUser.ProviderUserKey;
[Code].....
I have a ListView with Checkbox in ItemTemplate. My requirement is to get all data of selected Checkbox of a row. For this I am using a Button Click which will check the selected checkbox of ListView and then it will get all the data of selected of that checkbox.
<asp:ListView ID="lstCookies" runat="server" DataKeyNames="ID" OnItemCommand="lstCookies_ItemCommand">
<LayoutTemplate>
<table summary="Shopping cart" runat="server">
<tr><th class="goods-page-image">Service Image</th>
<th class="goods-page-quantity">Service Name</th>
<th class="goods-page-description">Service Description</th>
<th class="goods-page-price">Selling Price</th>
[CODE]....
I have a gridview with Edit and delete lini on it. I want to change the text of "delete".
I don't want to use link button because I have already implemented the code and its working fine. I just want to rename the "delete" text on grid view.
How do I reference the delete button to add the delete confirmation box when I have both the Edit and Delete buttons as the last two columns in the Gridview control. The following code works fine without any issues when I have the delete button only:
protected void GridView1_RowDataBound(object sender, GridViewRowEventArgs e)
{
if (e.Row.RowType != DataControlRowType.DataRow) return;
int lastCellIndex = e.Row.Cells.Count - 1;
Button db = (Button)e.Row.Cells[lastCellIndex].Controls[0];
db.OnClientClick = "if (!window.confirm('Are you sure you want to delete this record?')) return false;";
}
But, when I have both the Edit and the Delete buttons, I get the following error when I click the edit button while the delete button works fine.
Specified argument was out of the range of valid values. Parameter name: index
How do I reference the delete button so the edit button is not affected in this case?
I got below data on my listview:
id salary extra_salary total_salary
1 1000 100 null
2 2000 50 null
on my program, i have count button on below listview, when user click that button, system will auto count salary + extra_salary and updated into total_salary...
I have a GridView with EDIT, DELETE AND SELECT options.Now I want to include AJAX code so that on pressing DELETE or EDIT it gives me a pop-up box, confirming my action.
View 8 RepliesTo change particular value in a dropdownlist dynamicallyfor exampleif i have a value as Apple in dropdownlisti should chk if that particular values is present or not then dispaly it as "redfruit"
View 1 Replies
