Forms Data Controls :: Formatting Label In .net Pie Chart Server Control?
Nov 7, 2010How do i make labels to be displayed outside the slice pie instead of inside in asp.net chart server control
View 3 RepliesHow do i make labels to be displayed outside the slice pie instead of inside in asp.net chart server control
View 3 RepliesI am working with a chart control and on the Y axis i have numbers that fall between millions and billions.
The numbers on the axis themselves are not formatted and as such can be difficult to read. I wanted to know if there was a way for me to format the value that appears on the axis itself to be coma seperated?
here's what the Y axis looks like
600000000
300000000
100000000
numbers are just hard to read. How do i format them with coma's or even add a label saying (Millions) and then displaying only 100, 300, 600 etc
I have created a stackedbar chart that has the points populated in code behind. Each stacked group consists of 2 series. When I run the chart everything displays correctly except there is only one label on the xaxis. I have tried setting the xaxis label text to the name for each series but all this does is change it to the first series name, and not even under the correct position. Setting the series labels to enabled shows the correct data on the correct bars, but I would like it on the xaxis!
Tried changing the xaxis interval to 1 which seems to be a common issue for people but to no avail. Is it because I'm using a new series for each bar? Is there a way to label stack groups on the xaxis instead of one of the series?
I have an issue in using dot net chart control. In chart last column is not completely shown which give bad appearance and on right side of chart it looks like TickMark are enabled. I set MajorTickMark of AxisY2 disabled but still tick marks on right side.
View 2 Replieshow to freeze the x axis of the chart control in ms chart? need to use because data displayed at large amount that is scrollable.
View 1 RepliesAm I going mad/blind? Probably a combination of the two.
How does one go about removing the data labels from a pie chart with the new chart control in .net 4?
I can get these to display as tooltips absolutely fine, but ultiamtely I'd like the labels not to be present as it looks rather busy.
I've searched previous answers and seen code behind resolutions but surely there must be some sort of code infront option to turn these labels off?
I am using MS Chart control (3.5), and have a requirement where I need to display 2 pie charts. The datapoints for the pie charts is set programatically. My doubts are as follows:
1. Can I display both the pie charts in a single chart control and area, or do I have to use two controls? (Currently I am using two controls)
2. How can I maintain the same size for both the pie charts? This is my main concern, since the pie sizes keep changing, depending on the number of datapoints. I tried using custom properties like "MinimumRelativePieSize", but it's not working.
i'm trying to create a stacked bar chart on a vb web form using vs2010.My data source returns:
Error in Functionality Awaiting on Supplier
1IMT IssuesmActive6
IMT Issues,Awaiting on Supplier
2,IMT Issues,Awaiting on User 4
IMT Issues Closed 120
Login / Password Active
But I can't get this into a stacked chart. I know I must have to do quite a bit of work declaring what the series are and soforth, or having a different dataset but can't find any documentation on it.A link to some documentation or an example of a stacked chart from an sql datasource would be much appreciated.
I started using the awesome chart controls with my asp.net apps recently and so far they've been nothing short of breath taking. Right now I have a weird problem, on the first load of my page, the chart control appears correctly and the tooltip is correct, however, when I update it with new data, the chart displays correctly, but the tooltips are for the previous set of data.
I hope this makes sense. The first time I load the chart, the pie chart segments and tooltips are correct, after a partial postback (to get the new data), the pie chart segments are correct but the tooltips are for the previous data set.
Basically once the tooltips are set the first time, they can't be updated after that without a full page postback.
Here's how I set the tooltip:
[Code]....
Anyone else noticed this behaviour and have a work around?
Currently my only workaround is to check for a partial postback and not render the tooltip, which I'd rather not do as the tooltip display actual statistical data as opposed to the pie itself (which uses percentages).
I am using asp:chart control in my 3.5 application. My dataset have three columns i.e. Subject, Score, testDate. I am drawing the chart like this,
[Code]....
And my chart is displaying like this. And what I want is, the third column testDate should be displayed on the top of the series as follows.
I have a chart to display the percentage of available time for a machine, but it won't display all the labels. It will only display a select few, spread out evenly apart but I need it to show ALL of them. Here is how it's set up, however, I don't know what I would change in order for it to display all labels:
[Code]....
using the control in web application.
View 1 RepliesI have a series of textboxes on a FormView. There is a textbox for entering a percent for a deposit amount and next to that a corresponding textbox for entering a dollar value for a deposit amount. There are 3 sets of these.
If a user changes a percent textbox, I update the dollar value textbox based on the percent times the project's total cost. If a user changes the dollar value textbox, the percent textbox gets updated as a percent of that dollar amount divided by the project's total cost.
I have the percent textboxes formatted as "{0:0%}" and the dollar value textboxes as "{0:C}".
When a user types into the textbox, the formatting goes away and we get raw numbers but I don't want those raw numbers to remain as such after they tab or click out of the field. I added a TextChanged event to reset the formatting. This works fine on reformatting the percent textbox but the currency one remains as just a raw numeric value.
Here is the markup (ignore the lack of validation for numeric input only...it will be added):
<td>
<asp:TextBox ID="txtDepositPercent1" runat="server" AutoPostBack="true"
CssClass="TextboxAnimatedRightAlign" Width="33px"
Text='<%# String.Format("{0:0%}", Eval("fld_dep1")) %>'
OnTextChanged="txtDeposit_TextChanged" />
[Code]....
Is there a way to add a legend to the chart it creates? I have created a line chart and by default it has created different colors for the different y - axis data.
I would like a legend on the side that displays what data goes with which line color.
I'm using MS Chart Controls, i want to add a feature to my charts, im primarily using Bar charts. I will have a large numnber of Data points on my chart for example 20 bars etc, i want to limit the display to 10 so if there is more than 10 it will only show the last 10 bars and display a scrolling bar to scroll back and fort to see all the charts. I have the code to do this, and it works extremely well, only problem is. the code is in VB.NET I've converted it to C# and I am not getting any errors on page_load but my code doesnt seem to affect my chart in anyway, basically it doesnt work. Just wondering could some one have a look at my code and give me any pointers where i may have gone wrong or if anyone has ever got something similair to this working in c#. Im going to post both the VB.NET and the C#,
VB CODE
[Code]....
C#
[Code]....
I am using a Chart Control, and I have 2 series. In my case 1 for month and 1 for year. The problem is when the chart control is displayed during run time for some reason the legend has 4 entries 1 says Mont, 1 says Year, 1 says Series 1, and 1 says series 2. My question is why are there 4 entries for the legend?
View 5 RepliesI am using the Chart control unbound and binding data to it at run time. It is a bar chart. When it is displayed after applying the data the X axis is drawn vertically and the y axis is drawn horizontally. I want the opposite but cannot find how to change the orientation.
View 6 RepliesI have a Bar Chart being driven by the user search criteria. Is it possible to make it so they can click on the bars, or label of bar, and have it taken them to another page to see more details?
View 1 RepliesI have a drop downlist,and next to it there is an MS bar chart.i want to change the datate of the MS chart ,once the user selects another year from the dropdownlist.
When the page loads ,the chart displays the default year(2011) and it works.The problem is that is does not change the data when you select another year from the dropdownlist.
I can't figure out how to get the legend to populate all the "strReason" and get the correct percents to show for each column. This is where I'm at right now.
[Code]....
I have a DevExpress WebChart Control that binds to a DataTable. The chart control renders fine from the DataTable until I try to import data from a details view(i think the chart control renders before the detailsview?).
Here is three renderings.
Chart 1. just rendering from the datatable
Chart 2 The sqldatasource gets its para. from the values of two label controls to render the detailsview. The detailsview renders fine
Chart 3, the problem comes in when I try to extract the values from the DetailsView to populate the Chart, I loose the value. I am assuming the the datatable is built before the rendering of the detailsview? Lost at this point.
ASPx Code with SQLDataSource1, 2, 3
[Code]....
VB Code Behind
[Code]....
I have a .net3.5 mschart control bound to a data table displaying a line graph. I wigh to zoom in on an axis on an asp.net web form.
View 1 RepliesIm building an investment illustration which takes a users initial investment of say £1000 then an investment term of say 10 years. I then do some calcultations on the server and return a datatable something like the following;
YEAR_NO - RETURN_AMOUNT
0 1000
1 1098.11
... ...
... ...
9 2319.70
10 2547.45
[Code]....
My 'Y' axis is the monetary and 'X' is the term, the problem i have is the line starts to draw from year 1 instead of flush up against the 'Y' axis at year 0 & £1000.
I can't find how to set font-style for titles on x and titles on y axes in the chart control? This titles are values, that are bind to chart control from database.
I tried this, but it only changes font-style for values on the top of each column.
[Code]....
I am plotting a chart using charting control. The x-values are text values and y values are date values.
If there is same text multiple times, then the plotted chart has multiple bars of same value. I want the values for the same text to be on the same bar.