I have a chart to display the percentage of available time for a machine, but it won't display all the labels. It will only display a select few, spread out evenly apart but I need it to show ALL of them. Here is how it's set up, however, I don't know what I would change in order for it to display all labels:
[Code]....
I am using asp:chart control in my 3.5 application. My dataset have three columns i.e. Subject, Score, testDate. I am drawing the chart like this,
[Code]....
And my chart is displaying like this. And what I want is, the third column testDate should be displayed on the top of the series as follows.
My work is done properly all good with this query
View 1 RepliesWe need to visualize the number of forms submitted over a 2 week period where it is broken down by day/hour.
I have the query returning data such as:
My question is, how do I tell MS chart to display this data? When I bind it I get the following:
I'd like it to expand out and show the hours between the dates.
I am new to Chart controls and I'm trying to display a label (text) for a datapoint in a chart instead of a value.
I'm using the following code to load the datapoints and to add label information for each point (each label will be different).
But when the chart is displayed all datapoint labels are blank (if I use the first line of code) or the labels are all the same, containing the last rows value (if I use the 2nd line of code).
Can someone tell me what I am doing wrong? Is there something in the .aspx that I need to set?
[Code]....
For example:
I have 3 rows in my grid with the label data: "Cat", "Dog", "Mouse". But the label in my chart is blank for all points when I use the first line of code and when I use the second line of code the label is "Mouse" for all points.
I need to display the real time data in the label.
Explain In detail:
The camera is counting the people and store the counted value in database every minute.
so i need to pick the data and display it same on the screen. There are lot of cameras counting. So i need to take camera number and display respective count.
Camera NUmber
Counted Value
1
Label1(Display realtime data here)
2
Label2
How do i make labels to be displayed outside the slice pie instead of inside in asp.net chart server control
View 3 RepliesI have created a stackedbar chart that has the points populated in code behind. Each stacked group consists of 2 series. When I run the chart everything displays correctly except there is only one label on the xaxis. I have tried setting the xaxis label text to the name for each series but all this does is change it to the first series name, and not even under the correct position. Setting the series labels to enabled shows the correct data on the correct bars, but I would like it on the xaxis!
Tried changing the xaxis interval to 1 which seems to be a common issue for people but to no avail. Is it because I'm using a new series for each bar? Is there a way to label stack groups on the xaxis instead of one of the series?
My application work in this ways. I got a database collect data from 20 sensors. Database holds Temperature and DateTime data/Records from sensors. So i would like to make it whenever i view the chart, it will plot a line chart one by one according to the temperature and timestamp(DateTime). Which mean my X axis is a colleborate time on that particular date.I already design a in the way that the line chart will plot base on both dropdownlist, Sensor ID and Date. So it will work like whenever i select a Date or ID it will read the records from database table temperature.
View 9 RepliesI have a chart on a page and i call a dataset which sends the infomation to the chart this works fine and all the infomations is displayed fine. However my x axis is a time which is UTC time. Most of the people looking at the charts will be using EST is there anyway in which i can change the Xasis times to corespond with EST instead of UTC
View 3 Repliesim using Vs2010 to plot real time line chart. i have been looking for the section that allow me to set X and Y axis..
i jus couldn't find the place for me to set.
my Y axis is a double, min =0, max = 100 and my X axis, min =0, max = 300(seconds).
I am new to asp.net. I am suppose to continue a project. The previous person has created a line chart and I have to create a bar chart. However I do not know how to create a bar chart. Could u email me for the code as I realise that I can't upload the files.
View 5 RepliesI have 2 MS Charts(OriginalChart, encryptedChart) which are working well. I spent hrs trying to set these charts so that they display the same AxisY value. Example, OriginalChart displaying max AxisY value 50 (this value may change depends on the data), I need the encryptedChart to display max AxisY value 50 (regardless of its data) as well, This would allow user to compare the differences in these chart more easily. Currently, my encryptedChart is showing 5 to 10 for the AxisY value. I tried most of the possibility to set below but no luck. Research on this also not much useful info (or I don't understand them.)
"encryptedChart.ChartAreas(0).AxisY.ScaleView.... = OriginalChart.ChartAreas(0).AxisY.ScaleView....."
Below's my HTML code fyi.
[Code]....
I am using Mschart in that I want to display null value or zero value in pie chart. How to display that.
View 2 RepliesWhen I try to generate a StackedBar char, some Y fields are not displaying because of space. Example with following chart
Ex :columns in DataSource : 2,4,6,8,10
Columns displayed on chart : 2,6,10
I have use chart controller in my web application but it display wrong percentages this are the value:
TOTAL COST : 75000000000.00
LOYALTY DISCOUNT : 7500000000.00
When it display on pie chart it display TOTAL COST :90.91% and LOYALTY DISCOUNT=9.09%
but it should be 90% and 10 % how can I correct it
chtSavingBrekDown.Series["Series1"].Points.AddXY("Total Cost", totalCost);
chtSavingBrekDown.Series["Series1"].Points.AddXY("Discounted Dolers", discountValue);
chtSavingBrekDown.Series["Series1"].ChartType = SeriesChartType.Pie;// Set the Pie width
//chtSavingBrekDown.Series["Series1"]["PointWidth"] = "0.5";// Show data points labels
chtSavingBrekDown.Series["Series1"].IsVisibleInLegend = true;
chtSavingBrekDown.Series["Series1"].LegendText = "#AXISLABEL";
chtSavingBrekDown.Series["Series1"].Label = "#PERCENT";
chtSavingBrekDown.Series["Series1"]["BarLabelStyle"] = "Center";// Show chart as 3D
chtSavingBrekDown.ChartAreas["ChartArea1"].Area3DStyle.Enable3D = true;// Draw chart as 3D
chtSavingBrekDown.Series["Series1"]["DrawingStyle"] = "Cylinder";
chtSavingBrekDown.Series["Series1"].Points[1].Color = System.Drawing.Color.Yellow;
chtSavingBrekDown.Series["Series1"].Points[0].Color = System.Drawing.Color.Blue;
chtSavingBrekDown.Series["Series1"].Points[1]["Exploded"] = "true";
chtSavingBrekDown.Legends[0].Enabled = true;
chtSavingBrekDown.Titles[0].Text = "SAVING ESTIMATE BREAKDOWN";
I am working on charts with ms chart 3.5 control my question is I have to display legends of pie charts in tabular form. Which will contain the color used for different points and x values and y values. I managed to show the colors and x values but not able to show the y values. I am giving the code also. Example of x and y values are:
xvalues- InCorrect YValue- 5
xvalues- Correct YValue- 10
xvalues- UnAttempted YValue- 15
Here is the code used to bind legend values.----
LegendCellColumn firstColumn = new LegendCellColumn();
firstColumn.ColumnType = LegendCellColumnType.SeriesSymbol;
firstColumn.HeaderText = "Color";
firstColumn.HeaderBackColor = Color.WhiteSmoke;
Chart1.Legends["Default"].CellColumns.Add(firstColumn);
// Add second cell column
LegendCellColumn secondColumn = new LegendCellColumn();
secondColumn.ColumnType = LegendCellColumnType.Text;
secondColumn.HeaderText = "Name";
secondColumn.Text = "#LEGENDTEXT";
secondColumn.HeaderBackColor = Color.White;
secondColumn.Alignment = System.Drawing.ContentAlignment.MiddleLeft;
Chart1.Legends["Default"].CellColumns.Add(secondColumn);
// Add header separator of type line
Chart1.Legends["Default"].HeaderSeparator = LegendSeparatorStyle.Line;
Chart1.Legends["Default"].HeaderSeparatorColor = Color.FromArgb(64, 64, 64, 64);
// Add item column separator of type line
Chart1.Legends["Default"].ItemColumnSeparator = LegendSeparatorStyle.Line;
Chart1.Legends["Default"].ItemColumnSeparatorColor = Color.FromArgb(64, 64, 64, 64);
// Set Min cell column attributes
LegendCellColumn minColumn = new LegendCellColumn();
minColumn.Alignment = System.Drawing.ContentAlignment.MiddleLeft;
minColumn.Text ="#TOTAL{N1}";
I want to show the individual value of each data point is there any idea how to show the Yvalue of each datapoints
minColumn.HeaderText = "Questions";
minColumn.Name = "Questions";
minColumn.HeaderBackColor = Color.WhiteSmoke;
Chart1.Legends["Default"].CellColumns.Add(minColumn);
I created the form in which i am showing count down time in label.
below is the code
[Code]....
Even i show the time in various format means Hour, Seconds, Tick but difficulty is that i want to show time in "hh:mm:ss" format & Time in label will be decreasing.
How to show progressbar when processing a text file of million lines?
I checked your thread --> [URL]
But what I want is the progressbar should show percentage exactly.
I have an issue in using dot net chart control. In chart last column is not completely shown which give bad appearance and on right side of chart it looks like TickMark are enabled. I set MajorTickMark of AxisY2 disabled but still tick marks on right side.
View 2 RepliesI have a field in my database that contains a string of text with HTML tags in it.
What I'm wondering is how I can (using vb.net) show the text in a label but formatted to the html it contains instead of it just showin the html tags in the label
how to freeze the x axis of the chart control in ms chart? need to use because data displayed at large amount that is scrollable.
View 1 RepliesI have a drop downlist,and next to it there is an MS bar chart.i want to change the datate of the MS chart ,once the user selects another year from the dropdownlist.
When the page loads ,the chart displays the default year(2011) and it works.The problem is that is does not change the data when you select another year from the dropdownlist.
Am I going mad/blind? Probably a combination of the two.
How does one go about removing the data labels from a pie chart with the new chart control in .net 4?
I can get these to display as tooltips absolutely fine, but ultiamtely I'd like the labels not to be present as it looks rather busy.
I've searched previous answers and seen code behind resolutions but surely there must be some sort of code infront option to turn these labels off?
I am using MS Chart control (3.5), and have a requirement where I need to display 2 pie charts. The datapoints for the pie charts is set programatically. My doubts are as follows:
1. Can I display both the pie charts in a single chart control and area, or do I have to use two controls? (Currently I am using two controls)
2. How can I maintain the same size for both the pie charts? This is my main concern, since the pie sizes keep changing, depending on the number of datapoints. I tried using custom properties like "MinimumRelativePieSize", but it's not working.