I want to have two asp:buttonfield buttons in one cell. I have to be able to access the Gridview.SelectedRow. And I don't seem to be able to add a asp:buttonfield to a templatefield.
View 3 RepliesI am trying to insert a buttonfield at the end of the datagrid. I am using the following code. However, it is getting inserted at the beginning of the datagrid.
DataTable consolidatedDataTable = PortfolioManagement.Portfolio.GetConsolidatedPositionsDataTable(userName, portfolioName);
gridViewConsolidatedPositions.DataSource = consolidatedDataTable;
gridViewConsolidatedPositions.DataBind();
ButtonField buttonField = new ButtonField();
buttonField.Text = "Hedge with Stock Options";
gridViewConsolidatedPositions.Columns.Add(buttonField);
gridViewConsolidatedPositions.DataBind();
I know there are a number of posts along this topic, but everything I find seems to not have a final solution or else I'm just not getting what the solution is. I have a simple GridView with a ButtonField and a BoundField. I'm having the same problem most of the other posts seem to have; I can retrieve the BoundField value easy enough in the RowCommand subroutine, but I can't figure out how to get the value of the ButtonField. Here is the code I'm trying to use:
[Code]....
sAddr is being set to the correct address value, but sName is set to an empty string no matter what I try. The GridView HTML all works correctly, including showing the names from my bound data table on the button text. I can use to retrieve the ButtonField text value?
A bit new to buttonfields in gridviews - Did a bit of research and most of the stuff I came up with had the gridviews with data bound like so :
[Code]....
private void BindGridControl()
{//method created so that the binded gridview can allow paging controls
DataTable dt = new DataTable();
try
{
/*Gridview requires another column either a checkbox or a hyperlink column that
* can drill down another level and load a page where user can edit the data/cheque
* Will place an exception here that will prompt a window to notify users that
there were no rows returned
*/
GridView1.Visible = true;
sqlConn.Open();
sqlSearch = "select store_nbr as [Store number],date as Date,data_type as [Data type],acct_1 as [Account 1], ";
sqlSearch += "amt_1 as [Amount 1],acct_2 as [Account 2],amt_2 as [Amount 2], ";
sqlSearch += "acct_3 as [Account 3], amt_3 as [Amount 3], cheque_nbr as [Cheque Number], ";
sqlSearch += "cheque_amt as [Cheque Amount], gst_hst as [GST/HST], qst as [QST],comments as [Comment] ";
sqlSearch += "from SimpData where store_nbr = '" + StoreNum + "'";
sqlCmd = new SqlCommand(sqlSearch, sqlConn);
SqlDataAdapter adapter = new SqlDataAdapter(sqlCmd);
adapter.Fill(dt);
if (dt.Rows.Count > 0)
{
//if there are rows returned bind the datasource to the gridview
GridView1.DataSource = dt;
GridView1.DataBind();
}
else
{
//label control notifies user that there are no rows found
lblResults.Text = "Search returned no rows";
}
My ButtonFields<Columns>
<asp:ButtonField ButtonType="Button" CommandName="Select" HeaderText="Select item"
ShowHeader="True" Text="Select1">
<ControlStyle Width="50px" />
<HeaderStyle Font-Size="XX-Small" />
</asp:ButtonField>
<asp:ButtonField ButtonType="Button" CommandName="Select" HeaderText="Select item"
ShowHeader="True" Text="Select2">
<ControlStyle Width="50px" />
<HeaderStyle Font-Size="XX-Small" />
</asp:ButtonField>
<asp:ButtonField ButtonType="Button" CommandName="Select" HeaderText="Select item "
ShowHeader="True" Text="Select3">
<ControlStyle Width="50px" />
<HeaderStyle Font-Size="XX-Small" />
</asp:ButtonField>
</Columns>
[Code]....
I have a gridview with a column for tracking numbers. I would like for the user to be able to click the tracking number in that column and it open another browser window to the site with the tracking information. I have tried Hyperllinkfield and I cannot get it to open the website.
View 7 RepliesI have a gridview with a ButtonField. When I leave the button type as the default LinkButton, clicking that button fires the RowCommand and everything works as expected. As soon as I change the button type to ImageButton and assign an ImageUrl, clicking that button does not fire the RowCommand.
View 4 RepliesI have a grid view populated with some data included bit fields and I made an export to excel function For each row i need to check the cell with the bit value to change the cell color, but the cell is always empty, even if is the field is set to False or True. foreach (GridViewRow row in gv.Rows)
View 2 RepliesI'm having a weird problem where the GridView cell that I'm programmatically updating turns grey, and throws a null error when attempting to save row. I have been searching all day and have not been able to find a solution. I'm guessing there is a problem with my code, so here it is:
Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles Button1.Click
I have 2 gridviews in an aspx file. The First one is master grid, and the second one is detail grid. (such as Customer and it's Invoices) First, I load data into master grid. I use FireBug and notice that every row has it's row id, such as:
<tr onmouseover="javascript:SetRowColor('ctl00_ContentPlaceHolder1_grdResult_ctl02',0);"
id="ctl00_ContentPlaceHolder1_grdResult_ctl02">
.....
</tr>
Then, in master grid, I select a buttonfiled in a row to load the second gridview.Every thing alright, the second grid has it's row id But The master grid lost all row id that I dont know the reason why?
I want to add my own set of functions into my GridView. For example, I have a help desk management module that displays all the help desk tickets in a GridView. When the tech is finished supporting the customer, I want him/her to click the "Close Ticket" link in the GridView to close the ticket.
I've never used the ButtonField feature field before so I thought this would be perfect but I'm a little confused about getting the TicketID in the GridViewCommandEventArgs method. I thought I could just put the TicketID in the CommandArgument and pull it from there but looks like I can't do that as ButtonField is not giving me the CommanArguement option.
I'm not displaying TicketID's in the GridView because they're "uniqueidentifier" datatype and look ugly. How do I pull the TicketID if I were to use a ButtonField? Or is there a better way to do this?
I already have a method in my DAL expecting the TicketID so all I'd have to do is get the TicketID and call this method.
In the application I am working on there is a Gridview with a select and on clicking the select we get the value of the DataKeyNames.
Basically we have OnSelectedIndexChanged="GridIndexChanged" in the Gridview property.
Now the problem is that I want to add a ButtonField with a Commandname, so that I can call a different method. In the OnSelectedIndexChanged it's simple to get that value by doingGrivView1.SelectedDataKey.value, But how can I get the value of SelectedDataKey in the Button Click?
[Code]....
how can i set the visibility of the "asp:ButtonField" inside a gridview
View 10 RepliesI have a usercontrol that has a gridview. I have a few boundcolumns and then a buttonfield. The buttonfield needs to have a confirm message box and then proceed to the RowCommand event. In the RowCommand, I'm trapping for a CommandName called "DeleteFile".
The weird thing is everything works correctly with deleting a row if the onclick code is not registered. I'm using attributes.add for this.
I know there is another option for using a templatefield and then a button rather than a buttonfield. But, I've noticed that this approach causes a postback that effects another usercontrol on my page. It thinks I've submitted it which can either cause it to error out or potentially sumbit more information which I want to avoid.
[code]....
i need to do a pop up for every cell in gridview. The moment user click on the cell on gridview , a pop up pop up and showing every the data in the cell for user to do modification in textbox.
I am facing the problem in capturing the cell data and also bind the pop up to every cell.
I have a gridview that has 5 columns, and when a particular row is selected, I need to get the value out of the 5th column.
View 17 Repliesin my application a gridvie containing datas. if i select a row i want to display 2 cell values in to
2 textboxes.
how it is possible. i need the code in vb.net
I have a gridView which connect with sqlDatasource. I want get value from cell. When i do that - this.GridMain.Rows[1].Cells[9].Text but always there are "". How can a i get value form cells.
View 4 Repliesi'm having some problems calling a field from my gridview to use in a SQL query.
aspx:
<%@ Page Title="" Language="C#" MasterPageFile="~/MenuMasterPage.master" AutoEventWireup="true" CodeFile="Relatorios.aspx.cs" Inherits="qmetrics_Default" %>
<asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolder1" Runat="Server">
[Code]....
I think this happens cuz he is grabbing the two fields...how can i get only the field "nome"?
<asp:GridView ID="gvcart" runat="server" AutoGenerateColumns="False"
BackColor="White" BorderColor="#DEDFDE" BorderWidth="1px"
CellPadding="4" Width="593px" BorderStyle="Solid" ForeColor="Black"> [code]....
orderid='" & gvcart.Rows(i).Cell(1).Text & "'" is not returning the value....orderid is a label in gridview.. how to get the value of the cell...
I have a gridview that displays the current weeks scheduled games. Ideally I have added a column to the end of the gridview that I would like display 1 of 3 values. If the game has already been played I would like to display the score of the game; if the game has yet to be played I would like the column blank and if someone on either team has indicated that they can't make the game I would like to display a button that says "subs needed" and take you to another page to sign up to be a sub. Can this be done? I have been able to change the background color of the line based on the two boolean flags from the database using the RowDataBound event handler but I can't seem to find a way to set the value of a specific field in my row. (The background is set for the whole row.)
View 8 RepliesI have created a buttonfield in code behind and assign data to it. Does anyone know how to adjust the style of the data in the buttonfield specfically related to size?
[Code]....
How to set Height and ItemSource(Business Object as DataSource for Cell) for every Cell in DataGrid/ Grid? Shown below is part of code I am currently using with Grid Control. What I am currently doing is that I am using ListBoxItem, set Item Height and ItemSource at ListBoxItem Level, Add ListBoxitem to ListBox and then Add ListBox to Grid, It leaves me with just one row and multiple columns in the Grid, which is perhaps not the best way of doing it as it doesn't allow me to take benefits from UI Virtualization of Grid.
[code]....
I am open to use any control i.e. Grid/ DataGrid provided it allows me to set Cell Height and item source at Cell level. In my requirement, Cell height depends on the Item duration and size of image, which means the height of the cells may not be same across cells in any particular row.
I have a gridview which on the left hand column it will be the Select button, but I think when we did this in Gridview, it will select mulitple button (it's like a checklist). I have made some changes, but I still cannot get the button to select only 1 row instead of multiple.
[Code]....
disable an Add button in a gridview when the Edit or Delete button is clicked.?
View 5 RepliesWe have a page the we have to write where users are shown 'pages' of data from our database they then select the row they want and we take them into another part of the application where they can work with the data.
When we use the built in paging (in the gridview) it is just too slow, as there is too much data.
We have written paging into our stored procedure that gets the data to work around this. The stored procedure works just fine and it is quite fast.
How can I get 'paging' buttons into my gridview when I am not using the built in gridview paging?I can keep it simple if I have to (next and previous only) but it would be better to have a 'first', 'previous', 'next', 'last' type buttons.
I cannot seem to figure out how to get these buttons into the gridview however.
some sample code (preferably vb) that would show this? (or something similar)
Built in paging is not an option.