Why am I getting this error? I'm trying to do a calculation on my GridView2 and I'm using clientside javascript. I need to add the onkeyup attribute. How do I do this?
Code Behind:
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
CType(GridView2.FindControl("TextBox13"), TextBox).Attributes.Add("onkeyup", "calculateSubTotal")
End Sub
Objective:
Have the MultiView1 display only if Frieght values exceed 15.50. If check box is checked, retreive the row values of the Gridview1 and Gridview2 to perform a task.There will be two check boxes. One will be conditionally hidden. Each check box has a different function.
Example: Send an email notifying this entry has been flagged. I am using Visual Studio 2005 with ASP.NET 2 due to availability of resource. I have checked out numerous sites without finding the specific answer.
For example:
[URL]
The following a simplified representative example of what I am trying to accoumplish. It uses the Northwind.mdb access database with just the Customers and Orders table.
[Code]....
[Code]....
[Code]....
I have a gridview1 with a Select column, which has a SqlDataSource that executes a Store Procedure.
I also have another gridview2, which also has its own SqlDataSource, but in this case, the Store Procedure has a parameter. This DataSource assigns as parameter the gridview1 control, and its PropertyName is SelectedValue. How can I load the gridview2 when gridview1 is clicked in the Select Column?
I have a dropdownlist (ddlList) in gridview1. I need to reference that ddlList as my ControlID for the parameter.
I tried to define gridview1.ddlList, but this did not work. Is there any way (non-codebehind) that I can use to reference a dropdownlist which resides in gridview1 from gridview2?
Here is the scenario of my problem:
I have a default.aspx page which has two gridview controls i.e. Gridview1 [Displaying Order table] and Gridview2 [displaying OrderDetails table], when I am deleting a row in GridView1, GridView2 should also update its datasource because of referential integrity constraints.
Following is what I am trying to do in GridView2_Load event:
[Code]....
[Code]....
I have 2 Gridviews of the same structure and header. I want when user click hear of Gridview 1 for sorting, the same sorting applies to Gridview2 onclick.
View 4 RepliesI have a problem here.
I have a Gridview, lets call it GVDistinctDate which displays Distinct Date in one column only. For example: I got 5 rows, and 1 column where the column only display distinct dates such as 02/04/2010 | 03/04/2010 | 04/04/2010 | 05/04/2010 | 06/04/2010 where obviously this dates come from a table in the database.
Now i want to take those dates in GVDistinctDate and assign it to another gridview, lets call it GVReport, as column Header Text. For this GVReport, the first column would be StudentID where a list of studentid will be displayed, and then starting from the second column onwards, where the Header Text would be the dates from GVDistinctDate, will display a Status of absent or present according to the studentID and the corresponding date. How do it get the dates from GVDistinctDate into the column Header Text of GVReport?
AND how do it display the Present or Absent status based on the studentID in column 1 GVReport and the dates on the Header Text? Below are the codes of how i got the distinct date into GVDistinctDate
[Code]....
The code below is for GVReport and the comments are where i tried to put in the dates into the column header text.
[Code]....
There is a problem here: GVReport.Columns(k).HeaderText = headerText
Error:Index was out of range. Must be non-negative and less than the size of the collection.
Parameter name: index
Index outof range?GridView2.Columns[6] as BoundField I use Auto-generate field .
How to manipulate GridView2.Columns as BoundField with auto-generate field?
[code]....
I'm making a website in ASP.NET 4.0 where I make use of the RequiredFieldValidator control to validate a wizardstep.It works perfectly with Javascript enabled, but when I turn it off (in my Firefox) it just goes to the next step.We don't do a Page.IsValid check, but we don't do much on the "next button clicked" event either.Certainly not something that is forcing it to go to the next step.
View 15 Repliesi have gridview in page and i want user see gridview2 to click on special data in column1 and user see gridview3 to click on special data in column2(gridview2 or gridview3 in everytime)
i use templateFiled for display gridview2 but when i want to display gridview3(with another templateField) , dont happen in gridview,
(I want to display nested gridview in GridView1 but GridView2 Or gridView3 by clicking on Column1 or column2)
How can I get ClientSide(JavaScript) Value for My ASP.net Custom Control?
for example I want to get a value like this:
var selectedItemID = getElementById("<%=MyControl1.ClientId%>").value;
How can i set a specific Value in my control scripts to get it from ".value" property like above?
Additional Note:
i want ".value" property(javascript) to get the dropDown control(one of my controls in my custom control) selected Value.
In a formview I need to present a new value calucalted by dividing one field value by another. I need to present the result to one decimal place. The code I am using is the following, however it presents the resulting value rounded up or down to the nearest whole value:
<asp:label id=lblTotal text='<%# Convert.ToInt32(Eval("Value1")) / Convert.ToInt32(Eval("value2")) %>' runat="server"></asp:label>
I did try and insert refernces to {0:N1} but this just threw asp.net errors. Any advise on how I can guarantee that the value calculated is presented to one decimal place?
I'm not sure how to do this, but I did read a lot of post and searched for it.
Protected Function GetTotal(ByVal DonTotalQty As Decimal, ByVal DonValue As Decimal)
I have two coloumns in a table to store Registered and Closed dates.
I want to calculate the period and to show in labels templated in detailsView.
Period should be like this:
72 Hrs and 58 minutes
I know the built-in ASP.Net validators come with a client-side framework, however I've been unable to find anything that lets me check a single validator for it's Valid state.
The validator in question is a RegularExpressionValidator, which I use to determine whether an e-mail address is valid or not.
Here's some brief code:
[code]....
Here is part of my code. The commented portion is the logic in which i am trying to implement. I want client side validation to be done and checked to see if it is correct format (MM/DD/YYYY).
[Code]....
I am using a grid form to diplay data... the insert form is completely a separate form. In the insert form a text box called "FormPercentageTextBox" is getting a calculated result using javavascript based on some field ( field1,field2) values (val1, val2).
the problem i have is: when i edit the form and i want to update any value..i want the new calculation result showing on the edited "FormPercentageTextBox" field. I need to have this calculation reflected/
How can i use same javascript code for age calculation from two different Ajax CalemdarExtenar?
View 1 Repliesnote that the scenario is ASP.NET Webforms + Master - Content page which mess up the ids.
I have, say, three checkboxes
<asp:CheckBox ID="chkConsultantQuality" runat="server"
CssClass="company"/>
<asp:CheckBox ID="chkConsultantEnvironment" runat="server"
CssClass="company"/>
<asp:CheckBox ID="chkConsultantSafety" runat="server"
CssClass="company"/>
I would like to make a div id="CompanyPanel" on click event of each checkbox according to the following condition
visible if any of the checkboxes are checked.
hidden if all of the checkboxes are unchecked.
I am planning to use jQuery since I am selecting by class name. I could do it with jQuery.each on the class='company' by checking each for a checked flag.
Let's say I have a function that takes a string. That string contains the fully name of an enum type (e.g. "MyCompany.Area.AotherNamespace.MyEnum").
How could I create an array of strings (or List<string>) whose elements are the values of MyCompany.Area.AotherNamespace.MyEnum?
Is that even possible?I'm basically trying to serialize an enum type serverside and then output it in clientside JavaScript so I don't have to define an enum in two places--in my C# and my JavaScript.
I have three views inside a Multiview How to activate one by one view means I Just want to change the Active View Index of the Multiview using javascript in ClientSide How can i do this?
View 1 RepliesI am using a custom validator to call a javascript function for validation. My problem is that I need to be able to change the error message dynamically. Here is the code:
<asp:CustomValidator ID="CustomValidator1" runat="server" ClientValidationFunction="fcnValid1"
ErrorMessage="" Display="None" ValidateEmptyText="True">
</asp:CustomValidator>
[code]....
I have a gridview in which i have itemtemplates and label controls having data from sql server.
I have two fields say quantity and units and in third field i want their product. I m trying in rowdatabound event like this-
[Code]....
Here my third field is netvalue.
It is throwing error-
Input string in wrong format.
How can i achieve this?
Here is my page:
[Code]....
It basically is 4 questions with each answer assigned a value.
What I would like to do is when the button is clicked the selected values are retrieved and calculated to give a total.
That total is then compared against some common totals and the next value is shown.
So is the total is 8= Very Good, 6= Very Bad, 4= Terrible etc.
The two labels Result and Truth would sho the numerical result and the truth according to the scale.
I am at a loss on how to retrieve the list button clicked value, how to add them up and referance that to the Truth result.
its complicated (to me its "bang head against wall" difficult.
I have kept four column in gridview with dynamically added row...
E.g.
work type rate noofworker amt
Groundwork 10 100 1000
Earthwork 20 100 2000
Total 3000
OnChange event to fire the calculation...