My Question is related to access the rows in one page and putting conditions in another page.
I need to check whether a datagrid has row in it or not. DataGrid is in .aspx page. Based on this checking i need to write a condition in .ascx page.
the .ascx on which condition is checked is linked to .aspx page. Meaning that UserControl1.ascx is Register with Default.aspx page
I am using VS 2003
My Question is related to access the rows in one page and putting conditions in another page.I need to check whether a datagrid has row in it or not. DataGrid is in .aspx page. Based on this checking i need to write a condition in .ascx page.the .ascx on which condition is checked is linked to .aspx page. Meaning that UserControl1.ascx is Register with Default.aspx pageI am using VS 2003let me know if any input is needed from my side.
View 2 Replieshere my code-
GridView gvCondition = (GridView)this.FindControl("ucCondition").FindControl("gvCondition");
gvCondition.DataSource = objConditionFieldCollection;
gvCondition.DataBind();
but it is throwing as exception Object reference not set to an instance of an object.How can I access user control's gridview control from parent page?
i would like to ask about how can i open user control page when i click a button on parent page, also, can i call parent's method from user control page and then refresh parent page?
View 8 RepliesI have a Gridview that I am using in a User Control. The grid loads great and my paging buttons that exist outside of the grid itself work properly. When I click my delete button inside the grid, I am getting an invalid postback message. How should I handle this? My control raises one event by the way.
View 22 RepliesI've got a web site that has a master page and that master page (mpMaster that has a user control ucControl1) which has a sub user control (ucControl2), this user control has a property which accepts a value. Now, I have a page that uses the master page
and on this page I have another user control (ucPageControl), I need to find a way of setting the value in ucControl2 from ucPageControl. Is this possible at all?
have two user controls on one aspx page. UC1 has a grid which contains a link button column which user clicks. Based on the value of clicked cell, I need to show some data into UC2.How do I pass data from UC1 to UC2? How do I invoke a function of UC2 from UC1?
View 2 RepliesIt's simple to create both user control from the two world : ASP.NET+Razor or MVC 3.0.But i do not known how to consume the user control FROM the razor"_layout.chtml" page.I want to put such thing within the layout page: <uc:MyTag Prop1="" Prop2="" />So i need to declare this directive at top of the layout file : <%@ Register TagPrefix="uc" TagName="MyTag" Src="Controls/Mytag.ascx" %>
View 1 RepliesI also have a working application that popukates my datagrid with valid data rows from my DataBase. What I cant figure out is how to get each of the hyperlink lables to NAVIGATE to the correct and corresponding aspx page!
For example I have 5 rows in the datagrid and each row has its own hyperlink, each row contains contact and a short profile on 5 diffrent companies. For example when i click on let say row 3 that has (eg) Jimmy's Big Prawn's Restaurant listed in the the datagrid, I want to be navigated to a webform page dedicated to Jimmy's Big Prawn Restaurant.
[Code]....
I am guesing it has to do with the bolded text above, but "details.aspx" is just an empty webform, I would like the hyperlink to point to (eg) JimmBigPrawnRestaurant.aspx.
i have:
- Default.aspx;
- user1.ascx: 1st user control containing repeater;
- user2.ascx: 2nd user control containing a detail view of row.
In page.aspx i dinamically load the repeater inside a user1.ascx.
after i want to dinamically load the 2nd user control also in default.aspx by a button inside a user1.ascx.
How i can do this? I can't load user2.ascx inside user1.ascx but only in aspx page.
I am trying to create a web page, that use a user-control (the user control is win-form).I am getting the message : That assembly does not allow partially trusted callers.I put the dll on c:windowsassembly, but I don't know why I getting the above.Here is my code
[code]...
I want to share a common page load and page init events sequence between Master page and child page and User Control as described below:
Let us have the following components:-
1. TestMaster.master -> It is the master page
2. TestChild.aspx -> It is the Child page
3. TestUserContrl.ascx -> It is the UserControl present within the TestMaster.master page.
[code]...
I don't think I understand fully how ASP.NET does inheritance of controls.I have a user control, ucBase, which has an asp.net label in the ascx file. Code behind references the label and it works fine during run time if the control is not a parent for another user parent.
If I have another user control, ucChild, inheriting from ucBase, the label in ucBase's code is always null. ucChild has no controls in its ascx fileThe server controls (like the label) needs to be declared in the ascx file and not created programmatically.What needs to be done for ucBase to see its own controls when it's a parent user control?
I just developing my web design skills.
I have a Datagrid with 2 textbox template columnsand two checkbox template columns. I have two other Textbox controls and two CheckBox controls. I have an Add button.
I want to be able to use the add button to update Datagrid Record inserting the Textbox control texts and the Checkbox Control status.
In my default.aspx page I have a PlaceHolder control within an UpdatePanel. In this placeholder control I will dynamically load a web user control, which is just a form with a submit button. On this user control, I have the form within an update panel and I have the "Submit" button's Click Event added to the triggers.
When I submit the form, the UpdatePanel on the web user control nor the update panel on the default.aspx page are capturing the post back, thus causing a full post back which refreshes my page.
how to capture this post so its rendered in Ajax and not a full post back?
I have on dropdown that show hide user control. In the user control i have Ok and Cancel button.
When the dropdown change i want to apply ValidationGroup on the Ok button that is inside UserControl.
I have a label on my master page (called mainMenu) that shows the number of items in a cart. The label wasn't getting updated when the cart was cleared until after an additional postback or redirect so I created a method on the master page called UpdateNumberOfItemsInCart to update the label text.
Using the MasterType directive on the Cart page allowing me to strongly type the master page, I can access the update method from the Cart page. There is a user control also named Cart that actually contains the 'clear cart' button so I setup an event on the user control also called UpdateNumberOfItemsInCart. I wire up the Cart control's event on the Cart page which then makes a call to Master.UpdateNumberOfItemsInCart();
So far so good except when I wrap the Cart control with an update panel the update to the cart count label doesn't happen.
[Code]....
I have created a web user control I want to change the iframe' src value when the user click on the link but the problem is that I dont have access to iframe inside the page from web user control I think there is a way because my control is in the page they have some relation perhaps I like to find something like this :
[code]...
I have an asp.net usercontrol which represents a "popup" dialog. Basically, it's a wrapper for the jQuery UI dialog which can be subclassed to easily make dialogs.
As part of this control, I need to inject a div into the page the control is used on, either at the very top or very bottom of the form so that when the popup is instantiated, it's parent is changed to this div. This allows "nested" popups without the child popup being trapped inside the parent popup. The trouble is, I can't find a safe way to inject this div into the page. A usercontrol doesn't have a preinit event, so I can't do it there, and calling Page.Form.Controls.Add(...) in Init, Load or PreRender causes the standard exception "The control collection cannot be modified during DataBind, Init, Load, PreRender or Unload phases."
I thought I had found a solution by using...
ScriptManager.RegisterClientScriptBlock(Page, Me.GetType, UniqueID + "_Dialog_Div", containerDiv, False)
... which seemed to work well normally, but recently a coworker tried putting an UpdatePanel inside the dialog and now she's getting the error "The script tag registered for type 'ASP.controls_order_viewzips_ascx' and key 'ctl00$ContentBody$OViewZips_Dialog_Div' has invalid characters outside of the script tags: . Only properly formatted script tags can be registered."
How are you supposed to add controls to the pages control collection from inside a user control?
I want to put a Login Control and a Create User Control on the same page.. just wondering, before I start am I going to run into any problems by doing this?
View 2 RepliesIn my application(ASP.NET 3.5) I have a User Control(ascx) that I have on a number of pages. Sometimes I need to reference certain label from the page ascx is on.
When I try this from within ascx,
[Code]....
I have created one user control for changing the theme of the page where i have several buttons and on click of each button i am applying the theme of clicked buttons color and for that i have created several css files like red.css, blue.css , green.css etc.
now i want to apply this theme to the page but i am not able to do that from the user control as because i am not getting the stylesheet property in the page and thus i am not able to work further.
can anyone tell me how can i apply the theming from user control to the page its being called.?
I am tring to send form values to a page from a user control. I included the user control in a master page.When i use page.previouspage it can not get value. is there any way to send form data to a page from a user control included in a master page?
View 5 Repliesi have two user control page how to retrive text box and drop down value in both page in our aspx page
View 2 RepliesI am to access a method on my master page. I have an error label which I want to update based on error messages I get from my site.
public string ErrorText
{
get { return this.infoLabel.Text; }
set { this.infoLabel.Text = value; }
}
How can I access this from my user control or classes that I set up?
