HOw To Create A Strong Named Assembly
May 6, 2010
I have a web site project in which my architecture is n layered architecture.I am using Micorsoft Enterprise library's validation dll.As of now this dll is not strongly named. I need to make that assembly strongly named. how can i do this.I saw some articles which depicts how to create strong named assembly by taking the vs 2008 command promtp and type sn -k publickey.snk, and then add the assembly tag to the assemblyinfo.cs. I tried to do that, but my website project dosen't have any assemblyinfo.cs file.
View 1 Replies
Similar Messages:
Jan 24, 2010
Strong Named Their Assembly. I've read on-line and in the help files for 6 hours straight and I am no where closer to getting this. It seems that every 6 months I run up against one of these types of things with VB.net and the .Net Framework. I read on line and find dozens of people who get the same exact error. Most of the threads are never resolved and the ones that seem to resolve the issue do it in a way that doesn't work for ever one else. It is really absurd.
My web site runs fine in debug mode on my computer (local host). It loads in FireFox and runs fine. When I post it to my web site I get the error below. I try to "Strong Name The Assembly" with the command line command "aspnet_compiler -v default.aspx X:NetProjectsHumMPI -keyfile X:NetProjectsHumMPIkeypair.snk -aptca"
Default.aspx is what fails. This should be the virtual folder of my web app. Obviously "Default.aspx" is not right. I have tried 42 variations on what I think the virtual path to my web app might be. Every single time the compiler fails telling me that it is not a valid path.
I'm moving in to week two of trying to get a simple "Hello world" web app to load on my web site. It runs perfect on my development machine but generates constant errors on the web site. Each time I fix a problem that only happens on the web site another one crops up with even the slightest change - or sometimes even NO change to the code.
View 5 Replies
May 21, 2010
can anyone tell me how to solve this issue Assembly generation failed -- Referenced assembly 'Microsoft.Web.UI.WebControls' does not have a strong name
View 1 Replies
Mar 18, 2011
how to create a snk for all existing dlls(multiple) in n-tier ASP.net application?I have created a asp.net application using n-tier. My web layer contain refrences of all layers(data,facade,core,common).but when I try to create strong key of web layer it throws error as "refrences assembliy can not have Strong name".
View 4 Replies
Oct 11, 2010
i was wondering if visual studio 2010 can be used as an assembly editor too????if yes where do i have to go to create a first blank page for an assembly project?
View 1 Replies
Jun 3, 2010
I just want to create Shared Assembly and use that assembly in our application.I am using VS 2005.
Step 1
I am trying to build a dll.
Create class library project <TestDllHell>.
Under that project add CalculationArea.cs file.
[Code]....
Then TestDllHell.dll add into GAC successfully.
Now I want to use it in my Website project so did the following steps but unable to view that dll in .Net Reference List Box.
•I go for Run regedit to edit the Windows Registry.
•Navigate to the HKEY_LOCAL_MACHINESOFTWAREMicrosoft.NETFrameworkAssemblyFolders key.
•Right click on the AssemblyFolders key, then select New > Key. Enter the name of your assembly (without the .dll extension).
•Double click on the key's (Default) value. The Edit String dialog will appear. Enter the full path of the folder where your assembly resides. Note that all assemblies in that folder will appear in the Visual Studio list.
•IMPORTANT! You must exit and restart Visual Studio to see your assembly in the Add Reference dialog.
My question is that
How can I get that dll in my add reference assembly List .Net section?
And if I modify that dll(TestDllHell.dll) then again register in GAC then version will be different,So how can I told my client application that which dll you choose?
View 3 Replies
Mar 14, 2010
I'm a newbie into MVC and I am like only on chapter 7 in ASP.NET MVC Unleashed so be easy with m
[Code]....
how do I tell Create Button to send to an Action named Create and to Edit to an Action named Edit on the same form?I guess it is possible on ASP.NET MVC if it is possible on ASP.NET Webforms
View 6 Replies
Dec 10, 2010
I have a dynamically created page (read from database values) with grouped information. I wanted to add named anchors as each group is created. (Regular anchors will appear on the page also.)
I was hoping to find a jQuery plug or codeset example that could automatically generate and populate a drop down control for the page that provides the navigation to the named anchors.
View 1 Replies
Feb 18, 2010
I have recently discovered that I am affected by this bug http://www.mail-archive.com/mono-bugs@lists.ximian.com/msg71515.html
Well,at http://www.mail-archive.com/mono-bugs@lists.ximian.com/msg71529.html they say the work around is to create a global policy assembly and redirect the assemblies that way since it is not read from the web.config.
How do you actually do what they describe there? There is a huge documentation gap in that area with Mono.Also,I can't just recompile the assembly to use the new Mono assembly versions because the assembly is closed source.(but it does work with Mono.)
View 1 Replies
Mar 23, 2010
i need create metadata assembly for a function..
and i dont know how to create the step for creating assembly..
View 2 Replies
Mar 23, 2010
i need create metadata assembly for a function..and i dont know how to create the step for creating assembly..
View 1 Replies
Mar 17, 2011
In a Web Application project in VS08, how do you create an assembly? E.g. you derive a class based on HtmlGenericControl to form your own div, override the ClientId and UniqueId properties, so as not to get screwed up id's on the client-side, and then you want to use/reference this control in an aspx page.
refer to David Lively's answer (c# control names) regarding the same thing. I have tried his solution but I keep getting "could not load assembly file".
View 1 Replies
Jul 5, 2010
Before using any class in your website project/page we have to add it's assembly reference to our project. Right?
Now, when I am using SmtpClient class from System.Net assembly after adding the System.Net.Mail namespace in namespace node of application's web.config file but without adding assembly reference to the project, it still accepting and running the code. Why?
I enquired the machine's web.config file located at C:WINDOWSMicrosoft.NETFrameworkv2.0.50727CONFIG but didnt find assembly reference for System.Net there also.
So bit confused how it is working and where the assembly reference has been added and how?
View 1 Replies
Mar 7, 2011
My ASP.NET application is using an assembly without strong name. When I run it in IE, it shows an error saying: Could not load file or assemlby 'xxxxx.' or one of its dependencies. Strong name signatuer could not be verified. The assembly may have been tampered with, or it was delay signed but not fully signed with the correct private key. (Exception from HRESULT: 0x80131045)"I use sn.exe -Vr xxxx to register that assembly to skip the strong name verification, but still it shows that error. What could be causing this problem, and what can I do next to fix it?
View 1 Replies
Mar 6, 2010
I have the following password requirements:
1) Should be 6-15 characters in length
2) Should have atleast one lowercase character
3) Should have atleast one uppercase character
4) Should have atleast one number
5) Should have atleast one special character
6) Should not have spaces
Can anyone suggest me a RegEx for this requirement?
View 4 Replies
Mar 25, 2011
Today I had a problem with some routing in my ASP.NET MVC 3 application (with Visual Studio 2010).So I thought I install the ASP.NET RouteDebugger and fix my route problem. After I get the package through NuGet my project doesn't build anymore: referenced assembly ' RouteDebug' does not have a strong nameI could download the source of the RouteDebugger and build (and strongly sign) it myself, but that's not the purpose of NuGet isnt' it ;)
View 2 Replies
Jan 31, 2010
I thought about simulating strong-typing for key-value configuration of a new project by providing fake property info via implementing ICustomTypeDescriptor.The configuration instance should provide all default config keys as properties with default values however: I noticed that VS08 intellisense doesn't include "faked" properties which are created in example similar to [URL]
View 1 Replies
May 28, 2010
I have an asmx file that was created using notepad. Then I created the proxy class using wsdl.exe. Now I have a dll that I want to put it in GAC. GAC needs the DLL to have a strong name. How can I create a strong name for the web service?
View 2 Replies
Oct 6, 2010
I would like to state literally that I really do not want to reinvent the wheel, but as you know some times we get some unique "Must-requirement(s)" that will hinder us to re-use the open source codes.I want a proper, flawless and consistent Web Crawler. Basically, I want this Crawler (As a Web app NOT desktop app - Of course based on asp.net and C#) to grab the pages of any website and store them locally (Including resources like images and CSS...etc), download them locally and adjust any resource hyperlinks to point to the locally downloaded resources.
I saw HTTrack (http://www.httrack.com/), and it seems quite excellent, but the problem is that I want this Crawler to be a part of a system which includes other features and process. So, I really can't have this Crawler as an external tool.Main challenges:1) User should be able to specify to which level s/he wants to crawl, which means: User might specify a sub-site and want to crawl everything underneath it and not the upper level. You see ? So, there should be full crawling for the entire site and partial crawling.
2) URLs and how to deal with them? I faced some weird URLs and it was hard for me to identify the actual page because there is no file name. How to handle that? For example: (http://www.blue1.com/en/uk/Travel-info/At-the-airport/Security-control/) this is a URL of a website that is built on EPiServer (.Net based) but as can be seen from the URL that there is not actual aspx page, Therefore, how to deal with such URLs ?I have already started developing a POC using HttpWebRequest class, but frankly I am totally dissatisfied with it. It is inconsistent and the generated static content misses a lot of images and styles. Besides, the threads act up sometimes strangely.I would greatly and sincerely appreciate any input (Approaches, source codes, ideas , links...etc)P.S. I already saw: (http://www.codeproject.com/KB/IP/Crawler.aspx) and (http://www.codeproject.com/KB/aspnet/ZetaWebSpider.aspx).
View 1 Replies
May 2, 2010
I'm getting following warning
Assembly generation -- Referenced assembly 'System.Web.dll' targets a different processor
What does this mean and how do I fix this?
View 1 Replies
Apr 12, 2010
Im trying to make a template for a dropdownlist.
In my Model i have:
[Code]....
The PageTemplate, is a class, but I what my view to render a DropDownList, that can set the key.
I have in my shared/EditorTemplates/String.ascs - witch is render as that template
But my /shared/DropDownList.ascs, does not render at all. why?
// dennis
In a sence im trying to recreate this article:[URL]
View 11 Replies
Jan 14, 2010
In my project I use Strong Types Views. Because I find it nice structured.
public abstract class AbstractViewData: View Page ( ICollection Foo; )
public class HTML Component View Data: AbstractViewData ( string Foo2; )
I have the same structure in my code, as in the corresponding pages.And here starts the problems. I would like to use HTML.Display (o => o.Foo) could be a customer for that matter.But my Strong Types Views have not posted Metadata Model into my classes.Like: Return View ( "FooView", customer); would.Is there a way to write some code that can solve this problem for me?
View 10 Replies
Jun 15, 2010
[Code]....
for List<AnswerInfo>,
[Code]....
now, what i want to do is to place few textboxes on a view that allow users to input the Answer Text. after click the submit button. i want List<AnswerInfo> which contains the Text information pass to the controller. can anyone tell me how to do it?
View 4 Replies
Oct 1, 2010
MVC contains a strong typed HTML Helper (HTML.CehckBoxFor()) this takes a bool and returns a bool. To make the URL smaller I am thinking to change the bool values on the model object to byte or somthing like that so the url only contains &Parameter=1.
I have found this snippet :
[Code]....
But I have no clue how to turn this in to a strong typed HTML Helper for checkbox that takes byte instead of bool. Its also important that the model object is set with byte instead of bool.
View 3 Replies
Oct 29, 2010
I've developed an application using strong-typed dataset with .net framework 3.5.is there a way to change the source table for a tableadapter programmatically?
View 1 Replies
