How To Find A Hosting Company That Supports SQL Server With CLR Enabled
Jan 2, 2010
So I developed a web application in ASP.NET and SQL Server 2008. Part of the SQL code I implemented as a .NET assembly (instead of t-sql) because it is performing intense calculations that are better written in C#.
Now I am ready to deploy my application, but I am stuck looking for a hosting company that allows this. Scratch out Discount ASP (see this forum post). I tried emailing other hosting companies and I either get no reply or they say they will not support it.
Any recommendations? What's the big deal with having CLR enabled in SQL Server?
I'm using membership that created by asp.net configuration when you create users with roles when you create a user for your website using asp.net configuration in Visual Studio
After uploading my project and creating the Database, I can't login using the users that i have created, i'm 100% sure im using the right username and password but still can't login but they are working 100% in my local DB
after few search in google i found the solution is to execute the following command:
i started creating my website a while back and created it on framework 3.5. But i found out that the hosting company supports version 2.0.
Everything works ok apart from my registration which uses createuserwizard as i get errors with stored procedures which are part of the membership model.
so i have been thinking how can i adjust my webconfig and run aspnetsql.exe against my database on version 2?
I have developed a web service using c#.net for text to speech using speechlib. It is working locally but not on the host, as I am getting access denied. I have read on other forums that this is because of security permissions on the host server. I am deploying on a site which offers free asp.net hosting. Can someone point me out to a good asp.net web hosting which is not veryy expensive and that supports text to speech without problems?
if uploaded my hole web application to arvixe hosting company then when i try to run it it give me the following error (Does any one know what it is that i should do)
I have multiple sites hosted at a hosting company that does not support domain pointing. Right now I have all of my domains go to the root directory and Response.Redirect() to a sub-directory which leaves me with mydomain.com/subdir/. Is there a way to make my own pointer to eliminate the /subdir/ portion of the URL?
I just published my web site, and the problem is, that table can't be found. I'm using SQL Server 2008. I created new user, which is not sa, that I se to work with Sql Server 2008 Express manager. I tried to create sa user ass well on hosting server, but it is not possible, because it's already exists.
I think the problem is, that newuser, can't find dbo. tables, which are created by sa user. If that is problem, how can I solve it? I can't create sa user on hosting machine. Is there maybe some solution in right connectionString?
I'm using this kind of ConnectionString on hosting server:
I was surprised at their NOT having AJAX / ASP.NET support as practically every other shared hosting provider does and it's not like it's all that new, right? So to conclusively confirm that it was a no-go, I put the standard "update timer" sample AJAX app into a sub "test" directory and it works as it should. (The middle section that has the AJAX UpdatePanel updates.) Also, since I did not also upload a BIN directory for the AJAX DLLs I am assuming that this would indicate that the necessary AJAX components *are* somewhere in the shared kernel.
Iam using web developer express 2010. I was wondering if the web developer 2010 express supports SQL Server 2000. I know i could connectSQL server 2005 and up but is it possible i could connect sql server 2000 to web developer 2010 express?
how to get the total row counts in a Gridview control with default paging enabled? My gridview control is bind to an ObjectDataSource control.
The problem I am having right now is that when I loop through the gridview control, it only contains the total row for the current page being displayed on the screen and not
the total row in the entire grid. I am using the the for each loop.
After I successfully installed Database Publishing Wizard [URL], I use it to connect to my local database server using SSMS 10.0 to generate a .sql file but I'm getting this error "This SQL Server version (10.0) is not supported."
Is there any updated version of DPW 1.1 that supports SQL Server 2008?
So far, I've seen (and I'm using the following) scripts to show/hide a div or other controls depending on another control in ASP.NET
$('[id$=myRadio_0]').click(function() { $('[id$=myDiv]').show(); }); $('[id$=myRadio_1]').click(function() { $('[id$=myDiv]').hide(); }); and of course, my div in html like <div id="myDiv" runat="server" visible="false">
and that works fine when the user selects either option of the radiobuttonlist. However, when I assign that radiobuttonlist a value of 1 or yes on my Page_Load on code behind, that isn't (and probably can't be) caught by jQuery, and my div remains invisible even though the control has a value of Yes/1. So, do I need to set the visibility of that div from code behind, or is there a way in jQuery to force a scan of these dependencies after i've set the values for the main controls in code behind?
I have Visual Studio 2008 installed on this workstation with SQL 2000, 2005 Express, 2008 Express and I think 2008 R2 (not sure if that is a version itselve or not)
I will call that workstation HOME
I created some tables in SQLEXPRESS through VS2008.
I worked on this project on another workstation that I just installed VS2008 annd SQLEXPRESS 2008 and I know that was R2
Installed Visual Studio 2010 trial edition between the thiem I made the tables on HOME and tonight for the first time since that install
I am now getting the "cannot be opened becuase it is version Version 661. This Server supports version 655..."
What to do now?
I can opened SQLExpress 2008 management studio and it is running.
So is my SQL 2000. The problem seems to be that after the VS2010 install neither VS2008 or VS2010 can connect to the SQLExpress 2008
What do I do now?
I can't remove sql 2000 because it is tied to several 3+ gig databases that will not work in Express.
Sys.WebForms.PageRequestManagerParserErrorException: The message received from the server could not be parsed. Common causes for this error are when the response is modified by calls to Response.Write(), response filters, HttpModules, or server trace is enabled. Details: Error parsing near ' <!DOCTYPE html PUB'.
There are tons of references for this error message on the Web, but I can't figure it out. The problem is that the application works fine when I run it locally or when deployed to other servers. There is just one server where I get this error during a post back from an Update panel (it is supposed to populate and open a popup panel). There is no Response.Write() anywhere in the code and the other either. I think. The next thing I will try is install the remote debugger. In the meantime, can someone tell me how to check if server trace is enabled (IIS 6)?
I built a website using SQL 2008 Express. I want to deploy it to a hosting company (shared server). If I change the SQL 2008 Express database on my local machine (further development of the website), how can i synchronize the local SQL database with the one on the server without loosing data?
i have create My WebSite in asp.net 3.5 and SQL SERVER Managment Studio 2005 EXPRESS , every thing Work GREAT with out any problem when i run it on LOCALHOST,
but my Big Problem Idont Know What The Steps RUN it On Server Specially:
1- i Have Create My OWN SQL Data Base file with its own Stored Procedures, and its in the Same Folder of My Project.
2-whats about WebConfig? what i should write in it?
If a "server-enabled" HTML tag is in a Web form, like this -- <p runat="server"/>
-- is there any way for me to attach to its rendering? I assume once they have runat="server", they must have a lifecycle of some kind.I'd like to attach some code to the rendering of any HTML tag so enabled. So, whenever a template author puts runat="server" on a tag, I can catch the PreRender (or anything else) and execute some code.
I hope, the post is posted where it should be posted.I want to host my website on my IIS webserver so that I can access it on Internet. Could someone provide links for it.
One thing that has always deterred me about using ASP.NET is the cost for hosting was generally is a bit higher then the LAMP environment equivalent (and also a small little thing called WebForms). Now that I can getting back into C# programming, I think I am going to take another look at ASP.NET. ASP.NET MVC seems to have grown since I last look at it (version 1 was still in beta) and it seems like ASP.NET MVC might be the best of both worlds of ASP.NET and PHP. That being I can use C# as my language and template system (like I can with PHP) and not have to deal with the ultra super fantastically craptastical WebForms (can you tell I don't like them? ).
Now I need to find a good hosting provider and have a few requirements to be able to successfully replace my current LAMP hosting. I am going to want a hosting provider that allows me to have both PHP and ASP.NET running on the same IIS server so that I can host both type of projects from my web server (assume it is possible to run both PHP and ASP.NET on the same IIS server at the same time). I am also going to want to use MySQL instead of MSSQL. I am also going to want to be able to install subversion and/or git to host my own repositories. Figuring with all these requirements a shared provider won't cut it and I am probably going to need a virtual dedicated provider and if so I assume that would come with access for remote desktop into the server to allow to be manage it, right? I also want to make sure that it is easy to upgrade (or downgrade) the plan so that I can start off with the cheapest option and upgrade easily if my usage demands it.
Can anyone recommend a reliable and affordable windows server hosting provider that meets these requirements?
Just I started learning MVC pattern, of course i am learning it from Microsoft's website.Just i want to gather quiz information from the experts. My understanding is (correct me then and there)
1 ) MVC does not support server side events, but supports client side events. If it supports client side events, I need html page with jQuery/Javascript (view), but most of the example I absorbed is to display the information(model) in view, I did not see any client side event handling happens in view.
2) Except ViewState and controlState, MVC supports Sessions, Application State management, Cache management.
3) When request goes to MVC engine, the routing module routes the request that is picked up by the controller. The controller in executes the appropriate action and returns the appropriate view.
i'm the first servers using sql2005 i connect to the this server from the localhost and host free ok but when the rent is up to the host failed connect
