How To Resolve Conflicting Assemblies In C#
Jun 15, 2010
In my web application I am using NHibernate.dll. This has a dependency on folowing assembly.
'Antlr3.Runtime, Version=3.1.0.39271,
Culture=neutral,
PublicKeyToken=3a9cab8f8d22bfb7'
Now in the same project for another requirement I have to introduce Antlr3.StringTemplate.dll. Which has a dependency on another version of the above assembly.
If I use the version of Antlr3.Runtime.dll which satisfies NHibernate , Antlr3.StringTemplate starts complaining and vice-versa.
View 4 Replies
Similar Messages:
Apr 30, 2010
when I reference a assembly. It's reference gets added to the project file in my case ( ABC.csproj)
Also when I take a look at the web.config file there is a section called <assemblies>. And lot of assemblies are added there.
What is the difference between link to the assemblies in the Project file and the assemblies in the web.config file?
View 1 Replies
Jan 19, 2011
I have an Ajax auto complete textbox in my .NET 4.0 asp.net page via a web service, but the browser auto complete dropdownlist feature shows up on top of my .net auto complete dropdownlist.
Is there a way to make sure the browsers auto complete feature does not popup on this textbox? Almost like an override to make sure the browser ?
View 1 Replies
Jun 10, 2010
I just uploaded all my aspx files including web config file to the server. I received a notice saying the web.config file has been removed from the server due to its conflict with their server. The aspx files are working fine without the web config file. But the email form from my site is not working. I have a few questions regarding this.
1. Is web.config necessary to run aspx pages?
2. What are the possible reason web.config files is conflicting with the server?
3. As mentioned, the email form is not working. I am predicting the reason is it is unable to access the mail setting in web.config file.
View 3 Replies
Feb 23, 2010
One of the libraries I am including in my project makes use of System.Web.Extensions 3.5.0.0, which conflicts with my Framework 2.0 application, which uses (C:Program FilesMicrosoft ASP.NETASP.NET 2.0 AJAX Extensionsv1.0.61025System.Web.Extensions.dll). I can think of 3 possible solutions:
Ignore the warning and don't change anything. I am not sure what the application does to handle this.
Add an assembly binding element to my web.config (see below) Configure the application explicitly to use different assemblies (I think this is possible, but don't know how to do it).
However, I am unsure of the implications of each of these decisions. The application seems to work perfectly fine even when I ignore the warnings (solution 1), but ignoring warnings that I don't fully understand bugs me...as does having warnings like this show up at all.
[URL]
View 1 Replies
Feb 9, 2011
I downloaded MVC2 Futures and referenced it to my current MVC2 Project. However, if I want to call an HtmlHelper from MVC2 Futures I need to <%@ Import Namespace="Microsoft.Web.Mvc" %>
So I decided to add it on my Web.Config:
[code]....
but, this caused me errors. Could this assemblies co-exist? If yes, How?
View 1 Replies
Jun 18, 2010
I'm working on an asp.net app and I have some controls that are created dynamically on the OnInit event. One of that controls is an asp button that has been working fine until now. When I add a ScriptManager to my page, that same button is unable to postback. It's only working if a take the ScriptManager out. Has anything like this ever appened to somebody else? Am I invalidating the page somehow? Edit: This is my script manager tag:
<asp:ScriptManager ID="ScriptManager1" runat="server"
EnablePageMethods="true" EnableScriptGlobalization="true"
EnableScriptLocalization="true">
</asp:ScriptManager>
//My Dynamic Button:
Button button1 = new Button
{
ID = "button1",
Text = "Ok"
};
button1.Click += new EventHandler(Button1_Click);
View 2 Replies
Mar 8, 2011
I have this table in SQL that I'm trying to do some comparison work with Ok, onto the schema. It's like this:
[Code]....
Now, what I want to do is query my database in this manner:Display any records that conflict only Non-priority conflict based on: priority based on the time of day
[Code]....
View 4 Replies
May 4, 2010
i'v an enquiry form, user is operator as Role users fill enquiry form (enquiry.aspx) and view enquiry list done by thmselvs in viewEnquiry.aspx page in GridView im testing using different users accssing this application same time The Problem:
user1 has done 10 enquiries, and in viewEnquiry.aspx able to see is 8 enquiries the 2 remaining enquiries is reflecting in user2's profile or (in viewEnquiry.aspx page as logged in user2) what i'v done: i'v used "public static string UserName;" in Global class file clGlobal.cs in App_Code when user done login successful i stored UserName = dr.GetValue(2).toString(); and clGlobal.UserName = "" on Logout and on master page Load of User im checking (if clGlobal.UserName == "") then redirct to Login.aspx
View 1 Replies
Mar 17, 2011
i want to show a menu in some pages.
the menu is build from db with repeater
[code]....
when i am in "folder/page1.aspx" all the link are ok [URL]. when i'm in a folder "folder/folder2/page1.aspx" the links are [URL]
UPDATED:
i change it to
<a href="<%# VirtualPathUtility.ToAbsolute("~/admin/"+(string)Eval("TD_PageName"))%>"><%# Eval("TD_Name")%></a>
View 2 Replies
Jan 28, 2010
I have a facade class that my controller class calls out to and in that facade class, for whatever reason, I'm building a string a href element. And it resolves fine in casini but when it gets out in the real world like localhost it doesn't work. Is there a way to do this?
string goBackLinkForErrorMessage = "<br /><a href='/MyController/Action?id=" + blah + "'>Go Back</a>";
View 1 Replies
Jan 19, 2010
I am currently localizing my MVC website, using the Html.Encode method.
I've got a global resouce named "Localization" and using it by e.g. <%= Html.Encode(Resources.Localization.FirstName) %>
When compiled and viewing in the browser it works perfectly, but in VS 2008 Development Edition it marks it red and displays Cannot resolve symbol 'Resources' when hovering it.
View 3 Replies
Feb 3, 2011
I am writing a dynamic control that I want to pass in something along the lines of the following:
HyperLink myLink = new HyperLink();
myLink.NavigateUrl = "/Home.aspx?id=<%= DataBinder.Eval("PageId") %>";
myLink.Text = "The link";
myControl.Controls.Add(myLink);
I want to be able to resolve the myLink.NavigateUrl at run-time according to the context that myControl puts the control into in the end (this is not a WebControl and therefore adding to the collection of controls doesn't output to page).
View 2 Replies
Apr 9, 2010
I m receiving the following error when adding toolkitscriptmanager to my asp.net, thus i have installed all the needed dll's and if i create a new solution and use them it will work perfectly but if i add them to an exsting project it is giving me this errormoreover if i will run the application it will run without errors but the problem is if i add any new asp control likt textbox will not be available in the code behind but wheni remove the toolkitscriptmanager it works fine VS 2008 if any one know what is the solution
View 3 Replies
Jun 18, 2010
I am running an aspx page and keep getting this following error
[code]...
I am having issues trying to resolve this as the aspx page only has 129 lines and the vb page behind only has 28 lines. Can any point me in the right direction to track this error down
View 7 Replies
Aug 10, 2010
I first need to apologize in case this has been answered before but I'm a newbie (green as they come) and this error keeps popping up even before I start debugging! There are two errors and the second one is:" Error 2
Missing partial modifier on declaration of type 'WFPKenya2.WFPKenya2'; another partial declaration of this type exists"
View 6 Replies
Apr 3, 2010
I just need to ask something about .net assemblies. I'm sorry if this question may not be appropriate for this forum but it is very urgent and very important for me to answer so if any kind person can answer in simple and in detail about 'What are assemblies?' I googled about this but I got only one line definition for assemblies rest is only about private ,shared, manifest etc. etc. but I need to know what are assemblies.
View 8 Replies
Mar 11, 2010
I have an ASP.NET MVC 2 app targeting .NET 4 that needs to be able to resize images on the fly and write them to the response.I have code that does this and it works. I am using System.Drawing.dll.However, I want to enhance my code so that not only am I resizing the image, but I am dropping it from 24bpp down to 4bit grayscale. I could not, for the life of me, find code on how to do this with System.Drawing.dll.But I did find a bunch of WPF stuff. This is my working/sample code (runs in LinqPad).
// Load the original 24 bit image
var bitmapImage = new BitmapImage();
bitmapImage.BeginInit();
[code]...
View 2 Replies
Jun 16, 2010
I have an ASP.NET MVC web application running in IIS as a subweb; let's say its path is something like http://mysite.com/subweb.
I have a view which serves content obtained from a CMS. The CMS editor has entered some content containing a relative image path <img src="/images/imga.png" />.
This works fine on the production server where the site is the root website, but not on the staging server where the site is a virtual directory under the root website
The path should be <img src="/images/imga.png" /> on the production server
and <img src="/subweb/images/imga.png" /> on the staging server.
Is it possible to use the <base> tag to resolve this image path?
<head>
<base href="http://mysite.com/subweb/" />
</head>
<html>
<body>
<img src="/images/imga.png" />
</body>
</html>
It doesn't seem to work. Can anyone explain why or if this is a workable approach? I don't want to require the content editor to have knowledge of the website deployment option (which changes between UAT and production).
View 2 Replies
Jun 24, 2010
i have deployed my website in windows 2003 server. my cliets are working on that.every day night i restart the machine untill that there is no problem. if i have not restart the machine then soon my clients recive "PAGE CANNOT BE DISPLAYED". if i restart the machine then the issue is solved. i want to know the issue which makes the site "page cannot be displayed" and i want to resolve the issue with out restarting.
View 4 Replies
Apr 4, 2011
Using VS2008 and R# 5 I'm running into an odd situation, where on an aspx page I keep getting
Cannot resolve symbol 'symbolname'
But the code compiles and runs fine. While having a fix for this would be great, I'm just trying to figure out if I'm losing my mind.
The CodeFile directive and Inherits directives are fine. If I compile the app or just let devenv sit for a bit it'll go away, but as soon as I save the aspx [via ctrl+s] R# suddenly has trouble with the Inherits attribute and flips out on every method in the page (OnClick etc).
// Anonymized of course but otherwise intact
<%@ Page AutoEventWireup="true" CodeFile="TestPage.aspx.cs" Inherits="TestPage" Language="C#" MasterPageFile="~/MasterPage.master" Title="Test Page Title" %>
This is mostly just a grievance, because since the code compiles it doesn't stop me from doing what I need.
I would post a bug report to the JetBrains site but first I would like to know I'm not alone. It could be my machine. Maybe when I roll to VS2010 in a couple weeks this will go away?
View 1 Replies
Apr 4, 2011
I just installed SP1 for VS2010, and since then I get error messages from Resharper for stuff that used to work and be ok for Resharper (5.1) before.
The error messages are "Cannot resolve symbol 'Eval'" and some other methods other than Eval.
How do I solve this?
Is there a fix?
Is there some resharper cache that I must delete/clear?
(The code compiles and runs as usual)
View 2 Replies
Nov 13, 2010
This is a head-scratcher. I've got two projects open. In one of them I have no trouble incorporating DesignTimeResourceProviderFactory but in the second project I get the above error. Adding using System.Web.UI.Design does no good; "Design" is red and the rest is grayed out. No problem importing System.Web.UI though.
View 1 Replies
May 2, 2010
I was working with the previous version of the AjaxControlToolkit (I had the source project in my solution, just in case I needed to debug something) and everything worked ok, now I've downloaded the lastest build (40412) and I've choosen to remove that project and only use the binaries (of 40412). I added this line in the web.config (inside <controls>) to have it prepared for all the pages, and avoid the need to use the @register in each one of them <add namespace="AjaxControlToolkit" assembly="AjaxControlToolkit" tagPrefix="ajaxtoolkit"/>
Now, only have the binaries I think I should used
<add tagPrefix="ajaxToolkit" namespace="AjaxControlToolkit" assembly="AjaxControlToolkit, Version=3.5.40412.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35"/>
and inside <assemblies> this line
<add assembly="AjaxControlToolkit, Version=3.5.40412.0, Culture=neutral, PublicKeyToken=28f01b0e84b6d53e"/>
I don't know what should I write as PublicKeyToken, I'm getting Cannot resolve symbol 'AjaxControlToolkit' and, of course, my UserControls that use the AjaxControlToolkit are giving me error.
View 13 Replies
Jun 24, 2010
I am using ajax rating control, but i get the following error on change of rating , the funnest part is i get this error for every alternate submission, 1st time i click on rating stars it happen without error but 2nd time i do the same then error throws, for 3rd time no error , for 4th time again error and it continues "An unhandled exception has occured:
The target 'ctl00$ContentPlaceHolder1$dList$ctl00$Rating1' for the callback could not be found or did not implement ICallbackEventHandler." hope i get an ans for this funny kind of issue.
View 1 Replies
