Configuration :: Web Config Is Conflicting The Server?
Jun 10, 2010
I just uploaded all my aspx files including web config file to the server. I received a notice saying the web.config file has been removed from the server due to its conflict with their server. The aspx files are working fine without the web config file. But the email form from my site is not working. I have a few questions regarding this.
1. Is web.config necessary to run aspx pages?
2. What are the possible reason web.config files is conflicting with the server?
3. As mentioned, the email form is not working. I am predicting the reason is it is unable to access the mail setting in web.config file.
I have this table in SQL that I'm trying to do some comparison work with Ok, onto the schema. It's like this:
[Code]....
Now, what I want to do is query my database in this manner:Display any records that conflict only Non-priority conflict based on: priority based on the time of day
I am using a project that rewrites URL. I am not familiar with this code, but it works fine on IIS 6 and with VS2010. Problem begins when I need to deploy into IIS7.5 server. Seems like the rewrite doesn't work and the page doesn't fount after rewriting page.
[Code]....
I am trying to use this web.config code, but then I could see this:
i am working on an application ,i have hosted on server. everything going fine  . i have added a code to set session timeout in webconfig . but its expire default time .
When I try to encrypt the "connectionStrings" section in the web.config file of my asp.net web application on Windows Server 2008, I'm getting the following error:
Administration utility (2.0.50727) to install and uninstall ASP.NET on the local machine. Copyright (c) Microsoft Corporation. All rights reserved. Note: This utility has limited capabilities on the Windows Vista operating system. It is recommended that you use the "Turn on or off Windows features" option of the "Programs" component of Control Panel to install or remove ASP.NET. It is also recommended that you use the IIS Manager component or the Appcmd.exe tool to configure ASP.NET applications.
The above information is followed by the list of valid options to aspnet_regiis.exe.
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.
Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.
<!-- Web.Config Configuration File --> <configuration> <system.web> <customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/> </system.web> </configuration> Â What is it means , and how can i fix it ?
in MyWeb there are all the aspx page and some entites datamodel, in MyApp there are the class with function like "getter data from DB" and there is a entity data model.
afeter the deploy, I have only the web.config and the connection string for the entity datamodel....it´s run ok, read/write the data on the DB.
The problem is with MyApp.....after the deploy it is a dll file and I don´t have the app.config and the entity inside it don´t run, not read/write nothing on the DB.
There aren´t error or messager but not read/write the data in the MyApp project.
all run on the iis 7
now...the question is:
I lose the connection string (in app.config) after the deploy?
Can I put a entity in the MyWeb and read it in another project (myApp)?
I am developing web applicaiton. I want to read web.config in App.config file. I have appSettings and connectionStrings in web.config. How to read that?
While using a third party dll I was getting the following exception - "exePath must be specified when not running inside a stand alone exe" with following trace
The reason I found was that it was looking for app.config and I had provided the details in web.config. My question is why does the system.configuration differentiate between web.config and app.config.
I upgrade my application from .NET 2.0 to .NET 4.0. Everything went smooth, with very few errors. Now the code is compiling fine, but run time environment is loading the configuration parameters from app.config instead of web.config;Here is my setup:Objects project: has app.configUI project: has web.config, When I run this site, it is fetching the configuration parameters from app.config. Any idea if I need to make any changes to read it from web.config instead of app.config? It used to work fine in my previous environment.
I've installed IIS for Windows Server 2008 SP2 and Windows 7. In both instances, I can't get even the simplest of ASP.net scripts to work (note: I'm ftping the published files from Visual Web Dev 2008 Express on XP):
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.
Source Error
[Code]....
Line 36: ASP.NET to identify an incoming user.Line 37: -->Line 38: <authentication mode="Windows"/>Line 39: <!--Line 40: The <customErrors> section enables configuration Source File: C:inetpubwwwroot estweb.config Line: 38
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.
Details: To enable the details of this specific error message to be viewable on remote machines, please create a
<customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.
I built my ASP.NET website using vs2008 professional.
Now I have purchased vs2010 professional edition.
I do format my computer and then installed vs2010.
Now I want to deploy my website in vs2010, but it is giving configuration error in <add assemblies...
Configuration Error Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: Could not load file or assembly 'System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'
Web.config is the main settings and configuration file for an ASP.NET web application. The file is an XML document that defines configuration information regarding the web application. The web.config file contains information that control module loading, security configuration, session state configuration, and application language and compilation settings. Web.config files can also contain application specific items such as database connection strings
Example 1:
<!-- This is an example Web.config file -->
[Code]....
In this article, we will see how to read the configuration settings in the web.config using 'JavaScript'.
Step 1: Create a new ASP.NET website. Add a button control to the Default.aspx.
Step 2: Right click the project > Add New Item > Web Configuration File
Add the following sample entry to the appSettings section in the web.config between the <configuration> tag as shown in the example 1:
<add key="var1" value="SomeValue"/>
Step 3: To read these entries using JavaScript, add the following script in the <head> tag of your Default.aspx page as shown below:
<head runat="server"> <title></title> <script type="text/javascript"> function ReadConfigSettings() { var v1 = '<%=ConfigurationManager.AppSettings["var1"].ToString() %>' alert(v1); } </script> </head> Step 4: Call this function on a button click and display the values of the configuration settings
<input type="button" value="Get" onclick="ReadConfigSettings();" /> That's it. Run the application and click the button. The value of the key in the appSettings will be displayed in the alert window. I hope you liked this short article.
I keep getting the all-too-familiar Report Viewer Configuration error, even after double-checking changes in web.config.It worked fine yesterday morning. Then by late afternoon, after I uploaded some site changes, it reverted to throwing the error.Report Viewer Configuration Error The Report Viewer Web Control HTTP Handler has not been registered in the application's web.config file. Add <add verb="*" path="Reserved.ReportViewerWebControl.axd" type = "Microsoft.Reporting.WebForms.HttpHandler, Microsoft.ReportViewer.WebForms, Version=10.0.0
aspnet_regiis.exe -pdf "connectionStrings" c:web.config And this is the error I got. Error - "The configuration for physical path 'C:Web.Config' cannot be opened. And the permissions of that file is not read only.
I'm preparing to deploy a ASP.NET web application. The target server has already a previous version of my web application with parameters specified on the web.config file.
In the new version of this web application, the web.config file contains new sections I would like they appear into the target web.config file on the server.
However I can't find the way to merge the new web.config sections into the existing web.config file ?
Does I have to do it programmatically, or is there a tool to merge the both files during installation ? (I'm using Web Setup Project).
I have an Ajax auto complete textbox in my .NET 4.0 asp.net page via a web service, but the browser auto complete dropdownlist feature shows up on top of my .net auto complete dropdownlist.
Is there a way to make sure the browsers auto complete feature does not popup on this textbox? Almost like an override to make sure the browser ?
Now in the same project for another requirement I have to introduce Antlr3.StringTemplate.dll. Which has a dependency on another version of the above assembly.
If I use the version of Antlr3.Runtime.dll which satisfies NHibernate , Antlr3.StringTemplate starts complaining and vice-versa.
One of the libraries I am including in my project makes use of System.Web.Extensions 3.5.0.0, which conflicts with my Framework 2.0 application, which uses (C:Program FilesMicrosoft ASP.NETASP.NET 2.0 AJAX Extensionsv1.0.61025System.Web.Extensions.dll). I can think of 3 possible solutions:
Ignore the warning and don't change anything. I am not sure what the application does to handle this. Add an assembly binding element to my web.config (see below) Configure the application explicitly to use different assemblies (I think this is possible, but don't know how to do it).
However, I am unsure of the implications of each of these decisions. The application seems to work perfectly fine even when I ignore the warnings (solution 1), but ignoring warnings that I don't fully understand bugs me...as does having warnings like this show up at all.
I downloaded MVC2 Futures and referenced it to my current MVC2 Project. However, if I want to call an HtmlHelper from MVC2 Futures I need to <%@ Import Namespace="Microsoft.Web.Mvc" %>
So I decided to add it on my Web.Config:
[code]....
but, this caused me errors. Could this assemblies co-exist? If yes, How?
