Well i cannot find a solution,so..
I will post my code.The problem is that whatever date i try (i use greek d/m/y but i also tried m/d/y) it gives me the "error!" tooltip.
I've tried complex code,simple code, ValidationExpression,Globalization,no globalization.Nothing works.
Anyway to it's simplest form:
Code:
[code]....
have a C#/ASP.NET web application that contains DetailsView controls that are used for CRUD operations through the EntityDataSource and Entity Framework. Unfortunately I'm not sure which forum would be best to post this under, since I am wondering whether either the MaskedEdit AJAX controls or Entity Data Model could be configured to allow for this.ProblemThe Entity Framework requires time fields to be of time(7) data type, which must be entered as 24-hour time, with seconds (e.g. '09:30:00'). However, I want the time entered in 12-hour time and without seconds (e.g. '9:30 AM'). Is there a way I can configure the MaskedEditExtender and/or MaskedEditValidator to allow for this. What I was thinking is possibly using the AutoComplete portion of this control to fill in the remaining portions (i.e. seconds) that the user does not enter, but which the EF requires. Either that or can the Entity Data Model or something else be configured to allow for this?Existing Code
<asp:TemplateField HeaderText="Start Time" SortExpression="StartTime">
<EditItemTemplate>
<asp:TextBox ID="txtStartTimeEdit" runat="server" Text='<%# Bind("StartTime") %
[code]...
I have text box to enter a phone number. I'm using AJAX MaskedEditExtender and MaskedEditValidator to validate the phone.I have no problem with mask but the problem nothing happen when I enter for example only 3 number then lose the focus but as soon the focus on I will see the error message and it will disappear as soon as I write one number.
all what I want to get the error message if the user did not enter 9 numbers after lose the focus.
here is my code: <asp:TextBox ID="txtHomePhone" runat="server" ontextchanged="txtHomePhone_TextChanged"></asp:TextBox>
<cc1:MaskedEditExtender ID="txtHomePhone_MEExt" runat="server" TargetControlID = "txtHomePhone" Mask = "(999)999-9999" MaskType ="Number" AutoComplete="False"
[code]....
I have the following tabpanel (it actually contains a bit more content, but that content doesnt influence my issue):
[code]....
When I remote the MaskedEditExtender and MaskedEditValidator, it doesnt show that (undesired) behaviour anymore.Is there something special these controls do that cause them to refresh? Is there a workaround for this?
I am Using "MaskedEditExtender" along with "MaskedEditValidator" in my page with a textbox. it is not working and showing the NullReference exception. the call stack showing the following details
[NullReferenceException: Object reference not set to an instance of an object.]
AjaxControlToolkit.MaskedEditValidator.OnPreRender(EventArgs e) in C:UsersswaltherProjectsAspNetAjaxReleases30930AjaxControlToolkitSourceAjaxControlToolkitMaskedEditMaskedEditValidator.cs:384
I am using the MaskedEditExtender and MaskedEditValidator, but have experienced some strange
behaviour. (See code example below). When entering a date into the textbox this is what I see:
1. The mask
2. Entering the date and time e.g. "19-01-1980 10:11:12"
3. When removing focus from the textbox the result is: "19-01-1980 19:01:19"
The six first digits of the date is copied as the time? If entering a day of the month larger than 23 and any given month, year and time (eg. 25-10-1980 12:12:12) the validation fails as the six first digits are copied to the time resulting in a time 25:10:19 which obviously is not valid.
I have downloaded the AJAX toolkit sample code and experience the exact same behaviour. When running the AJAX Toolkit samples from[URL] works fine!
Additinal info: Culture is danish (DateTime format is dd-MM-yyyy hh:mm:ss). Tried changing my systems culture to en-US but same behaviour.
Code:
[Code]....
I want to use MaskedEditExtendor and MaskedEditValidator togather to perform validation for USA phone number.
My aspx code is below.
[Code]....
I'm trying to disable a MaskedEditValidator control through JavaScript.
The following approach works for other types of validors (RequiredFieldValidator) but doesn't seem to work for the MaskedEditValidator
[Code]....
I have 2 scenarios here for using the MaskedEditValidator for a date field. I'll start with the easier one first.
1) I have a date field. I want to set the MaskedEditValidator's minimum value property to TODAY's date. So for example, if the user enter's a date earlier than today, the AJAX control will show a message stating "you can't input a date earlier than today".
2) I have 2 date fields - 1st one is 'start date' and 2nd one is 'end date'. I want to set the MaskedEditValidator for the end date so that the minimum value property is the date from the 'start date' field. So this way, the user can't enter a date in the 'end date' field that is earlier than what is in the 'start date' field.
Are these 2 scenarios possible? Or should I try another option (Javascript, Jquery, etc...)?
I have a panel, with several textboxes and an ImageButton inside of it. One of the textboxes has a MaskedEditExtender and a MaskedEditValidator associated with it. When I hit enter from any other textbox besides the one with the MaskedEditValidator the defaultbutton that is defined in the Panel's DefaultButton property handles the enter key.However, when I am in the textbox with the MaskedEditValidator, the first button on the form is receiving the enter key. Now, if I take the MaskedEditExtender off of the page, and just leave the MaskedEditExtender, everything behaves as it should.Can anyone offer any insight into how I may get this to work properly, or is this a known bug?I tried searching the forums and found a similar post, but no conclusion was ever reached.
View 3 RepliesI am currently using a maskedEditValidator to do some validation checks in a field, everything works great until I attempt to insert a maximium value. My current maskededitvalidator looks like this:
[Code]....
When I add the maximium value into it, it pops up on the details view and will not go away thus not allowing for the new record to be entered. From what I have seen through various other post is that this is a know bug in the maskededitvalidator, and that if I want to do this to do it in a custom validator. My problem is I have no clue as to how to do this in a custom validator.
Something "weird" is happening with my ASP.NET application. I have a MasterPage with WebForms, and inside one of them, I have an ASP TextBox which is controlled by the MaskedEditExtender/MaskedEditValidator couple. Underneath, I have a GridView with 2 columns, an Edit ASP Command Field, an ItemTemplate which contains an ASP ImageButton with a Delete CommandName linked to a GridViewDelete Event through the OnRowDeleting attribute. The GridView is binded with SQL Server data while the page is loading.
It appears that once the page is loaded, if I want to delete a row by clicking on the ASP ImageButton, nothing appears. I have first to do something else with the GridView (raise an Edit Event for example), then it's accessible. I try different stuff to catch the source of the problem, and the "weird" part appeared when I deleted the MaskedEditValidator, just keeping the MaskedEditExtender : the Delete ASP ImageButton worked since the page loads!
So basically when i open the page i get the error above.
I've removed-added the toolkit toolbox.The error occurs p.e. in MaskedEditvalidator when i remove the mask from
MaskedEditExtender.Ok i know that it probably needs a mask and it crashes but what the hell is the
C:UsersswaltherProjectsAspNetAjaxReleases30930AjaxControlToolkitSourceAjaxControlToolkitMaskedEditMaskedEditCommon.cs ?? I don't even use c: for any project.Who is swalther?WTH?
And is there a MaskedEditCommon.cs in the toolkit?I did not find any MaskedEditCommon.cs in whatever, version library or whatever i downloaded.
Error:[ArgumentOutOfRangeException: StartIndex cannot be less than zero. Parameter name: startIndex] System.String.InternalSubStringWithChecks(Int32 startIndex, Int32 length, Boolean fAlwaysCopy) +7490863 System.String.Substring(Int32 startIndex, Int32 length)
[Code]....
The following setup seems to work fine on the client side, however when I post back and check Page.IsValid, the value is false. I also looked at mevDate.IsValid and it's false. It seems that setting the CultulreName on the MaskedEditExtender is sufficient to get the MaskedEditValidator to emit the correct JavaScript, but on the server side of things it doesn't work. When I flip CultureName to "en-US" everything works as expected.
I'm trying to have a textbox function exactly like the third textbox down on this page: [URL]. I'm trying to use a CalendarExtender control with a MaskedEditExtender, because I don't want the user to be able to enter anything except a valid date into the box. On my maskededitextender I have a mask of "99/99/9999" but it seems to only work when the date is actually 8 digits (e.g. 12/12/2000) and not when the date is 7 or 6 digits (e.g. 1/1/2000 or 1/14/2000). The mask screws up when the date is less than 8 digits. Here is my code:
<asp:TextBox runat="server" ID="txtDateAvailable" Width="150px" maxlength="50"></asp:TextBox>
<asp:CalendarExtender ID="calDateAvailable" runat="server" TargetControlID="txtDateAvailable" format="d" PopupPosition="Right"></asp:CalendarExtender>
<asp:MaskedEditExtender ID="mskDateAvailable" runat="server" targetcontrolid="txtDateAvailable" Mask="99/99/9999" clearmaskonlostfocus="false" MaskType="None"></asp:MaskedEditExtender>
If I could figure out how to get the date format of the CalendarExtender to MM/DD/YYYY instead of just M/D/YYYY that would fix it.
Microsoft JScript runtime error: 'undefined' is null or not an object:
And it worked fine with the ajaxcontroltoolkit 3.01
Now on 3.5 i gives problems.
Ok this is a reported bug so the solution(supposedly) is this:
[URL]
how do i compile the project.try to run the AjaxControlToolkit.VS2008.sln and errors pop out form everywhere.Is the dll available with the fix somewhere?
I want masked ComboBox, so I use a MaskedEditExtenderwith a ComboBox. The two controls came from the ajax control toolkit. But I got an error: "Unable to cast object of type 'AjaxControlToolkit.ComboBox' to type 'System.Web.UI.WebControls.TextBox'". Is there a way a can use a MaskedEditExtender with a combo box?
View 4 RepliesI am using Ajax extender controls with asp.net 3.5 in particular MaskedEditExtender.My settinngs are:
Mask = 99.99
InputDirection = RighttoLeft
MaskType = number.
I can't seem to achieve what I want which is to set the focus just to the left of the decimal point. I try both InputDirection RightToLeft and LeftToRight. They both have problematic behavior. The example given by Microsoft on their web site, is close to want I want but I cannot achieve these results.See
<cc1:MaskedEditValidator
ID="MaskedEditValidator5"
runat="server" [code]....
I am using MaskedEditExtender on my textbox.Set the masktype to number.Now the user can enter decimals also at any place to my textbox.Is it possible for my MaskedEditExtender to still accept that or I have to use custom javascript/ regex for this.
View 5 RepliesI'm having a really strange issue with the MaskedEditExtnder. I've attached some markup for one of the textboxes. I'm using a MaskedEditExtender and MaskedEditValidator along with a CalendarExtender so the user has the option to type the date or click on an image and pick the date.
So, if I enter/pick a date then select a control that forces a postback (usually a dropdownlist but not always) when the page is returned the focus goes back to the textbox I just entered the date in. So what about the MaskedEdit, MaskedEditValidator, CalendarExtender would cause the page to return focus to the control being extended? See markup below - am I missing something??
[Code]....
I'm having a issue with a MaskedEditExtender, I am using it for a datetime field with the sqltable field definition as smalldatetime, I have several error messages such as emptyvalue error message, minimium value error message along with a few others.
Everything works fine until i put a maximium value, on selecting either insert or edit it throws the error even if the date entered is between the minimium value and the maximium value and will not go away. As you are aware smalldatetime has a max value of 06/06/2079 which won't be a issue in my lifetime but for validation purposes I want to make sure the user doesn't accidentally enter a value larger than the max value thus causing an error on insert or edit.
the code like below, how to clear tbxDate when input an invalid date use javascript
[Code]....
I've inherited a web project from another company, and I'm having a weird issue with a phone number mask.
If the ClearMaskOnLostFocus is "true", I lose the mask in the edit field (this is a editing screen for an existing record). If set to false, the mask is present, but the leading digit is truncated, and will write back to the DB an incorrect number if submitted, with that leading "_".
True = 8885551212
False=(_88)-555-1212
The DB field a a varchar(20) -- don't ask me why.
<asp:MaskedEditExtender ID="MaskedEditExtender3" runat="server"
learMaskOnLostFocus="true" MaskType="Number"
Enabled="True" Mask="(999) 999-9999"
TargetControlID="Phone_Number">
</asp:MaskedEditExtender>
I'm recently back at work after a long layoff period, and my ASP is a little rusty.
I've added a script manager control to an ASP.NET page. And I've also got a details view control on the page. I've converted a couple of the fields to template fields, because I want to add a MaskedEditExtender to the textboxes in the fields (one fieldis associated with a time field in the database, and the other field is associated with a datetime field in the database, so I want to put a MaskedEditExtender into the template field to associate with the textboxes there. However, no matter how many timesI try to copy the MaskedEditExtender into the template field, VS 2010 will not let me.
View 13 Replies