Installation :: Security Exception After Deployment?
Jan 4, 2011
In the website that I'm developing, I need to send email via GMail for certain cases such as "forgot password". It's working properly on my PC but when I upload it to the server (which has windows 2003 running) I get the the following exception:
Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
I have create a setup project. I have done everything what i need. Now i want to include one thing. That is i am have sql database backup file(Test.bak).
i want to restore that file while my installation is in process.
So what are the steps should be included in the packaging process to restore the database Test.bak in sql server?
I have developed my web app in 3.5 framework and deployed at high config server(15 gb ram). In my app there are some rdlc reports which always throws out of memory exception. each report has around 15-20 pages. rest of pages are working fine. there are 700-800 users hitting this site concurrently. i m checking my server utilization and its never gone beyond 2 gb. wot i need to do so that my app can utilize full memory.
I recently added Forms Authentication to a project and set it up by right-clicking on a Login control at design-time, selecting "Administer Web Site," and setting up all the users, roles, etc.
how is this to be done after the site is deployed? Would the webmaster have access to this tool? Is there some other tool available?
just basically as it says in the subject. After I deploy my asp.net 4.0 website, the login control just refreshes itself after a valid username and password have been filled in instead of doing a redirect. The connection to the database works, because I can register and stuff from the database shows up in my website.
Security Exception Description: The application attempted to perform an operation not allowed by the security policy. To grant this application the required permission please contact your system administrator or change the application's trust level in the configuration file. Exception Details: System.Security.SecurityException: Request for the permission of type 'System.Web.AspNetHostingPermission, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.Local its run fine. when i place in iis. it throw this exception.
I have created user web control library project and these controls i'm using in my web application. These User controls just works fine in my local machine but when i moved this project(including Library) to our Local server , it is throwing security exception
Error 1 Cannot register assembly "LocalServerLibraryDemoLibraryDemoLibraryinDebugLibrary.dll". Request for the permission of type 'System.Web.AspNetHostingPermission, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed. Library
Can I create an incremental deployment package using either Visual Studio 2010 Web Deployment Projects or Web Deploy (Web Deployment Tool) .
I need to automatically select changed files from a source and destination or a change set on TFS and build a deployment package only with the changed files.
I have set up a very simple authentication page where the user enters his password and if successful authentication occurs the program allows the user to make use of the controls in the page.
I used ASP.Net Configuration to create the user and roles, SQL Membership Provider for the authentication tables and asp login controls to authenticate.
Is there any way to add users and roles once the project is deployed? Could I use the ASP.Net configuration page? and if so how?
I have few queries regarding installation of SSL certificate.How much time will it take in installing the SSL certificate and getting the IIS https enabled? Is there any risk involved with the installation of SSL certificate that might bring down the applications hosted on the IIS.Will the application hosted on that IIS continue working with HTTP?(I don't want each application to be https enabled.
I am trying to implement the Ajax HtmlEditor into my application. I currently am using a regular TextBox to load and save some data to some EMail template files and had to do some work-arounds to get it to accept the HTML Input. I am trying to upgrade it to use the Editor, but as soon as I insert the Editor and do a PostBack, I receive the Security Exception below. There is absolutely no change to the code-behind, so I don't understand the issue. There is so little on Google for the Version 3.5 Editor that I'm stumped. I have Debugging enabled, but it won't give me the Soruce Error either.
Security Exception Description: The application attempted to perform an operation not allowed by the security policy. To grant this application the required permission please contact your system administrator or change the application's trust level in the configuration file. Exception Details: System.Security.SecurityException: Request failed. Source Error:
I'm getting this exception randomly in one webservice, it used to happen in the first call only, and in the second calls and so on it works fine ... and after a while without use the webservice it happens again. It seems to be that when the AppDomain is not loaded, the first time fails... and subsequent calls are ok; when IIS shutdown the AppDomain... the next call will fail again.
I have added a service from a Win2003 server to my Visual Studio project on WinXP machine. Create an oject for this service went OK. But when I tried to run a method in the service I get "401 web exception while accessing a service.".
a C# file in my App_Code folder calls a C++ DLL that is in my BIN folder. I am getting following error:
Security Exception
Description:
The application attempted to perform an operation not allowed by the security policy. To grant this application the required permission contact your system administrator or change the application's trust level in the configuration file.
I hosted my application on GoDaddy shared server. They are not allowing me to give full trust to the application by changing setting in my application's web.config file.
I have hosted my website on godaddy and referenced MYSQL.Data.dll. This works fine on localhost. However when i try to run the same code online it throws the following error. System.Security.SecurityException: That assembly does not allow partially trusted callers.
I have downloaded the MqSQL.Data code version 6.2.4. which already has using System.Security; and [assembly: AllowPartiallyTrustedCallers()].
I'm developing a usercontrol to use in SharePoint, and I think I need to use framework 3.5.
If I create a new web application targeting 3.5 and try to run it, I get this:
Code: [SecurityException: Request for the permission of type 'System.Web.AspNetHostingPermission, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.]
I am running Windows Server 2008, ASP.NET 3.5, IIS7 i wonder if it's IIS7 problem, or .NET Framework or even security updates problem suddenly all websites do not work, and from event viewer there're two errors
Exception: System.TypeLoadException
Message: Could not load type 'System.Security.Authentication.ExtendedProtection.ChannelBinding' from assembly 'System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'.
StackTrace: at System.Web.Hosting.IIS7WorkerRequest.Dispose()
at System.Web.Hosting.PipelineRuntime.DisposeHandlerPrivate(HttpContext context) at System.Web.HttpRuntime.FinishRequestNotification(IIS7WorkerRequest wr, HttpContext context, RequestNotificationStatus& status) at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) Faulting application w3wp.exe, version 7.0.6002.18005, time stamp 0x49e023cf, faulting module kernel32.dll, version 6.0.6002.18005, time stamp 0x49e037dd
I am using MVCcontrib grid in my application. Everything works fine on my dev machine. When I publish it to the server and navigate to the page that renders the grid I am getting this error Description: The application attempted to perform an operation not allowed by the security policy. To grant this application the required permission please contact your system administrator or change the application's trust level in the configuration file.
Exception Details: System.Security.SecurityException: Request for the permission of type 'System.Web.AspNetHostingPermission, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed. and the source of the error is shown as <%= Html.Grid(Model).Columns(column => {i have added
[Code]....
to the web.config but still get the error
I have been chasing this erorr all day and coming up blank. I created a stored proceudre(fairly complicated logic), added it to the context, and set the return type to a specific entity type.
I call it from my service with the following method:
public ISingleResult<ServiceTemplate> GetByFkId(int FkId) { return Db.usp_ServiceTemplateSelectByFkId(FkId); }
I have tested the stored procedure and it returns the results I want. When I make the service call from the controller, it doesn't error out, however, it should return 4 records in this instance and instead, it returns the same 4 records (repeating the first record 4 times). .........
After moving my web site from my local development environment to a shared host I get:
Security Exception
Description: The application attempted to perform an operation not allowed by the security policy. To grant this application the required permission your system administrator or change the application's trust level in the configuration file.
The problem occurs in my web application everywhere the following is called:
Since my web application is only trying to open it's own web.config file, I don't know why this is flagged as a security exception. Maybe someone can explain... But more importantly I need a solution, the couple solutions I found via Google are painful.
I have (pretty much) the following code in my protected void Application_Error(object sender, EventArgs e) method in Global.asax....
Exception ex = Server.GetLastError();
if (ex is System.Security.SecurityException)
Response.Redirect("Logon.aspx");
else
Response.Redirect("ErrorPage.aspx");
If I navigate to a page before I log on the exception is caught and I am redirected to Login.aspx as I would expect. However, this is only working when debugging using VS on my local machine.When uploaded to the live environment, the exception is not caught and the user is presented with "Security Exception - Request for principal permission failed."
Using Visual Studio 2005 to create a test ASPX Page using Visual Basic.Simply trying to open an existing file that exists on the particular directory where the ASPX files and the web.config file has been copied. If we run the ASPX page on the Local Host of the Development PC, it works just fine.However when the same page is uploaded to the GoDaddy Site using ASP 2.0, we are seeing the following error:
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +181 ystem.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +75 Version Information: Microsoft .NET Framework Version:2.0.50727.3615; ASP.NET Version:2.0.50727.3053 [code]...
