suddenly, with my Visual Studio 2008 I can no longer debugging my web applications (ASP.NET 3.5). I obtain this error: Unable to start debugging on the web server. Click Help for more information. Auto-attach to process [8360] w3wp.exe' on machine 'DELL' failed. The weird thing is that I haven't done special changes to my IIS.
View 1 RepliesI get this error when I hit F5 in VS 2008. I have checked that Windows authentication is enabled on the site and it is. I can mannully attach the debugger to the IIS process and it works. What could be wrong? I have tried alot of things without success.
View 2 RepliesUnable to start debugging on the web server. The IIS worker process for the launched URL is not currently running.I'm running Windows 7 64 bit, VS 2008 sp1.When I first try to debug I get the error msg above. I wait a few minutes (presumably some service is starting) and debugging will start but no breakpoints are recognized.Some of the things I've tried:Changing the binding of my site from a static IP to "*".
Enabled windows authentication.made sure localhost = 127.0.0.1 in the hosts file.The website was built under windows xp and whatever version of IIS ships with xp. My web config has no errors that I know of but might be missing something required for iis 7 (??)
I have seen this for a long time, and finally decided to put the question up here. I have some applications that I need to maintain that were written in Delphi 2007 for .NET (ASP.NET 2.0). Normally, the first time I run the application (using IIS) I get the classic "Unable to start debugging on the web server. Unable to attach to ASP.NET worker process" message. I simply press F9 (run) again, and it runs. Sometimes I have to try running several times before it will actually run. I am running Windows 7 64-bit (and have seen the same effect on Vista 64-bit). I do have IIS configured for ASP.NET, and I do have the following code in my Web.config file.
<system.webServer>
<modules>
<add name="DbgConnect" type="Borland.DbkAsp.DbkConnModule,Borland.dbkasp,Version=10.5.0.0,
Culture=neutral, PublicKeyToken=b0524c541232aae7" preCondition="managedHandler" />
</modules>
<validation validateIntegratedModeConfiguration="false" />
</system.webServer>
The point is that I eventually can run the application in the debugger, sometimes even on the first try. Many times when I get the failure it happens about 15 seconds or so after I press Run, sometimes even after I've hit a page or two (or three) of the Web app. And, yes, when Delphi gets into this mode, I can simply run without debugging, and all is fine (unless I really want to debug). And, I can just keep on trying to run in the debugger and eventually it will just work.
It appears that Delphi's .NET debugger is somehow getting the idea that the application cannot run, and then gives up and stops the process (which as I've mentioned is sometimes clearly running). I know of other developers who have also seen this behavior. My question is, does anyone know how to stop this annoying behavior?
im using win 2003 server,
when attaching process im unable to find the w3wp.exe working process.
i didnt find in the application process.
what should be done in order to find this.
I'm trying to debug my web application on my localhost machine in Visual Studio 2010 and I keep getting this error: "unable to start debugging on web server. The Microsoft Visual Studio remote debugging monitor(MSVSMON.exe) does not appear to be running on the remote computer."
Is there a way I can turn this off as I'm not trying to make any attempts debugging remotely.
I have used Visual Web Developer (versions up to 2010) with no problems for several years. Starting last week I am no longer able to run or debug any ASP.Net application locally. I am running Windows XP, IIS 5.1, IE8, Visual Web Developer 2005, targetting .Net 2.0. I am not able to Start Debugging or Start Without Debugging for any project. When I attempt to Start Debugging, IE browses to [URL] instead of to the project I am attempting to run. When I Start Without Debugging, IE opens to about:blank and then when I close that window another IE window opens to [URL]
Maybe irrelevant, but I had the same problem with IE7 and VWD 2010 (versus IE8, VWD 2005). IIS is set to .Net version 2.0. I have the same problem whether I add a virtual directory to my project in IIS or not.
When debug a project, then error message show:
"Error while trying to run project : Unable to start debugging on the web server. The project is not configured to be debugged."
I am getting an error "Unable to start debugging on the web server..." while running as web application in VS2005. But the error seems only for this application. I created a test application, both in VS2005 and VS2008, and found no issues in running these applications.
View 1 RepliesI used to have nice development environment at XP for .Net web application development. I have now installed Windows 7 and going to take it as my new machine. I already installed VS2005 and I'm able to
build a project. IIS is working fine and I'm able to open the web application in the web browser. Windows firewall is Off.When I click Start Debuggin on Visual Studio 2005 on Windows 7 I get following error:Unable to start debugging on the web server. Unable to connect to the web server. Verify that the web server is running and that incoming HTTP requests are not blocked by a firewall. What could be wrong? Something to configure in the IIS?
I have a solution I have been working on over the last few weeks with a 3 or 4 projects in that used to build and begin debugging in under 10 seconds.The solution contains 3 dll's and 1 mvc project.
As of today, it takes about 2 minutes to start debugging, it keeps pausing on "loading symbols for ccpCodeProvider.dll".
I'm debugging on the internal vs development server, and I haven't changed anything since yesterday?I haven't ever used symbols before, and I'm not trying to debug the framework or anything, I just want my stupid web project to run.I created a new solution from scratch and added a random console app, and that also takes forever to debug.
When i try to run my web application in visua studio 2008 a error window comes out that says: Unable to start program [URL]. The system cannot find the file specified. I googled but not got the solution for this problem. I have VS 2005 and VS 2008 both on my machine. I also unistalled VS 2008 and reinstalled it but that does not solve the problem.
View 5 RepliesI am getting this error, without any further details, when attempting to debug my ASP.Net project in VS2010. There are other developers using the same tools and code who are not having this problem therefore I know the problem is not in the web.config file. I have found several suggestions when googling the issue and tried them all to no avail. I uninstalled and re-installed VS2010 along with the .Net 4 framework. I made sure Anonymous as well as Windows authentication is enabled in IIS. I uninstalled and reinstalled IIS. I am at a loss. I can attach to the process and debug the ASP.Net code that way, but what I really need to be working on is a Silverlight app that is called from the ASP.Net and the breakpoints don't work in Silverlight when I attach to the process manually.
View 3 RepliesI have recently installed VS2008 standard edition after using VS2008 express and VS2010 Express (on this same laptop) running Windows 7 Build 7100.
On clicking "Debug" the error appears:
"Unable to start program
[URL]
The debugger is not properly installed. Cannot debug the requested type of code. Run setup to install or repair the debugger."
This is for a Web Site - File System originally created in VS2008 express.
I am running Visual Studio 2010 (as Admin), IIS 7 on Windows 7 x64. I am able to run the ASP.NET web site in IIS 7 without debugging just fine, but when I press F5 to debug it, I get: Unable to start debugging on the web server. Could not start ASP.NET debugging. More information may be available by starting the project without debugging. Unfortunately the help link is not helping me much and leads down a heck of a large tree of things. I checked the following:
Security requirements — I don't recall having to do anything special before. The worker process in IIS7 is w3wp.exe. It says that if it's running as ASPNET or NETWORK SERVICE I must have Administrator privileges to debug it. How do I find out if I need to change something here? Web site Property Pages > Start Options > Debuggers > ASP.NET is checked. Use custom server is set to the URL of the site (which works fine without debugging). Debugging is enabled in web.config. Application is using ASP.NET 3.5 (I want to move to 4.0 eventually but I have some migration to deal with). Application pool: Classing .NET AppPool (also tried DefaultAppPool). Surely it shouldn't be that hard to install IIS, VS, create a web site, and start testing it?
I run the start debugging option...it runs successfully. but still is shows start debugging option is shown in the Visual studio 2005 IDE. And one more problem is ::I applied break points in one page and run the application. but those break points are not detected....
View 1 Repliesam using Visual Studi 2005 and asp.net 2.0. when i run the project then IE is running and i can see the output on browser, but i cant debug it because by default it is not attaching wed dev. so every time i have to go Debug menu and select Attach Process, instead of this how can we set VS will automatically attach the process.
View 9 Replieswhen i attach to process results an error..plz help mewebdev.webserver.exe has stopped working.Stopped workingProblem signature:Problem Event Name: CLR20r3Problem Signature 01: webdev.webserver.exeroblem Signature 02: 9.0.0.0ignature 07: 2c9 cid=0x0409
View 6 RepliesI have just the Express version of VS2010 so no option to attach to process. I am developing a custom DotNetNuke module which runs fine by itself, but has problems when running once installed as a module in DNN. Hence I need to attach to the DNN process and see what is going on. I don't have DbgCLR.exe as it looks like they stopped including that in .NET 3.5 Framework...and I don't want to risk installing .NET 2.0 framework and mess up my dev environment.
View 1 RepliesI am using visual studio 2008. I'm getting the following error while running or debugging the project.
"Cannot detach from one or more process. [5804]w3wp.exe; Unrecoverable API error. Do you want to terminate them instead?"
I made a small app to capture frame from video using asp.net, in visual studio, it works fine. however the problem arises when i try to use any other servers, I am currently using iis 7.5, and trying to debug on server, but alas when i reach some region of code the attached w3wp.exe just get detached, the process crashs, no debug available anymore.
Faulting application name: w3wp.exe, version: 7.5.7600.16385, time stamp: 0x4a5bd0eb
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
[code]...
I have loaded Web Site from HDD. Now trying attach it to process WebDev.WebServer.EXE. But in Visual Studio 2010 Web Developer Express edition of VS not exist tool Attach To Process. Is it normal? if yes,
View 1 RepliesI been trying to attach a database in sql 2008 express created in VS 2008 Professional. I have been getting error message and codes which there is no support for once you click the link in the message whats up with that? to my most recent memory it had something to do with permissions... but I was logged in as adminstrator so that confuses me.
View 2 Repliesgot a new bigger, better, faster pc at work. Installed VS 2008 and went back to normal developing in VS 2008 on my pc, with the files on our dev server, which is on the network. But, whenever I set a breakpoint, and enter Debug mode, I get this error: An error occurred loading a configuration file: Failed to start monitoring changes to 'ServerABC' because the network BIOS command limit has been reached. For more information on this error, please refer to Microsoft knowledge base article 810886. Hosting on a UNC share is not supported for the Windows XP Platform.
View 1 RepliesI have upgraded a Visual Studio 2005 Web Site in a 32 bit server to Visual Studio 2008 maintaining the same 2.0 framework in a 64 bit server with Windows 2008 R2 Server. The Web Site has several class libraries.
After porting to Visual Studio 2008 2.0 Framework using the Upgrade Wizard, I found that I was unable to hit a break point in the Project code behind files while I was able to in the class libraries. The bin folder has the dlls and the corresponding pdb files for the class libraries. I did start the Web site as an Administrator and made sure whole bunch of IIS7 properties are properly set.
I tried to rebuild the solution as a Web Application in Visual Studio 2008 and gave up that approach as I faced hundreds of error messages pointing to missing references and namespaces inspite of adding whole lot of references and namespaces to the Web.