JQuery :: Dynamically Load User Control In Tab?
Jan 12, 2011I am using jquery tab , in my page there are 7 tabs, and in each tab i want to load a user control dynamically,
View 4 Replies
Similar Messages:
C# - Dynamically Load User Control?
Oct 26, 2010I have this GridView that have it's DataSource as a list of previously selected products.
For every item on it, I need to Eval it's ID and load a specifc form that the user must fill, then after that i've got to update the GridView.
I have made those specific forms as User Controls, is this the best approach for this scenario?
If yes, how can I dynamically load them, in a way that I can make queries/postbacks then update back my gridview?
C# - How To Load A User Control Dynamically In A Webpage
Nov 29, 2010How to load a user control dynamically in a page?
I have a page that contains radioButtons. Each click on a radio button loads a user control (.ascx) in the page.
What I am doing is loading all controls at the same time, but set their visibility to false. When a user clicks a radiobutton I set the visibility of the specific user control to true.
As a result I am loading all the user controls on each postback.
AJAX :: Dynamically Load User Control Without Postback?
Aug 22, 2010In my base page, I have a dropdownlist control which loads different usercontrols on selectedindexchanged event.
While loading these usercontrols, my page postbacks all the page. I used updatepanel but again same problem.
Is there any way to load controls without postback?
Here is my code:
[Code]....
Web Forms :: How To Load User Control Dynamically On Webpage
Mar 29, 2010how to load user control dynamically on asp.net page? I am loading user control in my page_Init() event under if(!IsPostBack) but when user post the with any button click then my user control is disapper?
If i am loading control without if(!IsPostBAck) then its fine, but each time a page is posted loading of control is not good because it will slow my web site?
Load User Control Dynamically Inside A Contentplaceholder?
Jan 12, 2011My aspx page uses a master page. How can i load a control in my aspx page dynamically inside a contentplaceholder?
I got something like:
Select id
case 1
load usercontrol A
case2
load usercontrol B
case else
load usercontrol C
Dynamically Load User Control And Assign Property?
Jan 3, 2011I would like to dynamically load a user control and assign one of its public properties OnLoad...
I'm doing the following from a parent user control to dynamically load the child user control...
UserControl uc = (UserControl)Page.LoadControl("~/Controls/MyUserControl.ascx");
What else do I need to do to pass a value so its public property is set OnLoad?
Web Forms :: Load User Control Dynamically On Menu Bar Click
Jan 4, 2011I am using 5 ,6 user control. I wanted to load diffrent user control on Click of menu bar. Means when I click on first link of Menubar 1 user control should load and 2 loaded when i Click on 2 link of menu bar. How to do that?
View 3 RepliesWeb Forms :: Improve The Performance Of Dynamically Load User Control?
Feb 16, 2011how to improve the performance of dynamically load user control
View 1 RepliesWeb Forms :: Load JavaScript File Dynamically When User Control Is Loaded
Jun 17, 2013I have a tab control on my page and on click of tab user control is loaded dynamically.I need to load the javascript file of that user control dynamically. I don't want to add the reference of my js file on parent page.so in my .ascx page load event i added:
System.Web.UI.HtmlControls.HtmlGenericControl js = new System.Web.UI.HtmlControls.HtmlGenericControl("script");
js.Attributes["type"] = "text/javascript";
js.Attributes["src"] = "../../js/DatesJavaScript.js";
Page.Header.Controls.Add(js);
but it is not working.
Forms Data Controls :: Dynamically Load User Control Based On The Count?
Mar 17, 2010Im working with asp.net web application,I need to get multiple gridviews dynamically based on the count (which i get from database) for that i took a web user control and i added a gridview there . iwant to load that usercontrol in aspx.cs based on the count..
but im able to bind only one grid view...
JQuery :: Dynamically Instantiated User Control?
Oct 15, 2010This JQuery datatable is present in one of my webuser control named "LeftVerticalLayOut.ascx". I am dynamically instantiating Webusercontrol on click of a link button. This link button is bound with the trigger event of Update Panel control.
So clarifying once again : I have one UpdatePanel which I am triggering with Link button("lnkLoadControl") . On click on "lnkLoadControl" I am able to load Usercontrol("LeftVerticalLayOut.ascx") onto the updatepanel. Now the jquery datatable I am creating in load event of Usercontrol is getting generated.
After the datatable(having id as "example") is created, I am calling the below code in my
function loadHandler()
{
Sys.WebForms.PageRequestManager.getInstance().add_beginRequest(BeginRequestHandler);
Sys.WebForms.PageRequestManager.getInstance().add_endRequest(EndRequestHandler);
}
[code]...
Now as I am creating the UserControl on the fly, the Jquery in not getting applied.
Using Javascript Inside A Dynamically Load UserControl In JQuery Ui Tabs
Jan 25, 2011I need to insert some JavaScript code inside a UserControl that I load from an Ajax call via jQuery Ui Tabs. Let me explain... This is my View (with jQuery loaded)
<script type="text/javascript">
$(document).ready(function () {
$("#tabs").tabs({
cache: false,
});
getContentTab (1);
});
function getContentTab(index) {
var url='<%= Url.Content("~/Home/getUserControl") %>/' + index;
var targetDiv = "#tabs-" + index;
$.get(url,null, function(result) {
$(targetDiv).html(result);
});
}
</script>
<div id="tabs">
<ul>
<li><a href="#tabs-1" onclick="getContentTab(1);">Nunc tincidunt</a></li>
<li><a href="#tabs-2" onclick="getContentTab(2);">Proin dolor</a></li>
<li><a href="#tabs-3" onclick="getContentTab(3);">Aenean lacinia</a></li>
</ul>
<div id="tabs-1">
</div>
<div id="tabs-2">
</div>
<div id="tabs-3">
</div>
</div>
With these lines of code I call the Ajax function to load the content into a DIV.
This is the Action from the controller:
public ActionResult getUserControl(int num)
{
return PartialView("TestUC", num);
}
And this is the UserControl...
<%@ Control Language="C#" Inherits="System.Web.Mvc.ViewUserControl" %>
Number... <span id="testSpan"><%=Model.ToString() %></span>!!
<input type="button" value="Click me!!" onclick="message();" />
<script type="text/javascript">
function message(item) {
alert($("#testSpan").html());
}
</script>
The problem is that the message() function returns always 1 (instead of returning the correct number). My question is... How should I add the script to my UserControl in order to have my code running correctly?
How To Load Aspx Page Dynamically Inside A JQuery UI Dialog
Apr 1, 2011need to open an aspx page (called editItem.aspx in code below) loaded dynamically inside a jQuery UI dialog from a parent aspx page. the child page
has a button server control and should go back to parent page after postback. with the following code I get the error"The state information is invalid for this page and might be corrupted"
<%@ Page Language="vb" AutoEventWireup="false" CodeBehind="popOver.aspx.vb" Inherits="test5.popOver" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
<title></title>
[code]...
JQuery :: Load Gridview With Paging And Sorting By UserControl Dynamically?
Feb 20, 2011i want to load a usercontrol that contains a gridview with paging and sorting capabilities without postback.
Code for Load UserControl in case Dynamically is:
[Code]....
Web Forms :: Dynamically Load And Display UserControl Using JQuery AJAX And WebMethod
Oct 3, 2012I want to use same functionality in Ajax:Accordion. Looking for the code for this as well as instead of label in user control i want to bind the grid view.
View 1 RepliesWeb Forms :: Load User Controls Dynamically?
Jul 19, 2010 i want to be able to load user controls and populate them with data from a sql database at runtime based on a status field in my database but im struggling to do this.
my default page.aspx holds the user controls (acts like a container). at the moment i had referenced all the user controls to load up when the page was loaded so:
[Code]....
[Code]....
i then created a procedure which reads from the database the "status field". so if the status field is "pending" then i want the uc:GRLOLApproval control to show up but im not sure where to put this code or how to do it. i want to be abel to load the control at runtime and run this code. in my default.aspx.cs code i have done the following in the page load:
[Code]....
i tried to reference te user control in my default.aspx page by doing: protected GRLOLApproval GRLOLApp; but it wouldnt recognise it because it not been reference in the source file.how do i reference it so that i can read the data from my database and write to the fields in uc:Collectionrequest. (I have exposed the properties in the uc:CollectionRequest that i want to access btw) have been working on this for days now and just cant seem to load the user control or access any properties.
Dynamically Load Repeater Control
Jul 17, 2012for creating an example for dynamically loading a repeater control retrieving records via stored procedures from code behind code on button click.
View 1 RepliesWeb Forms :: Load User Control In Page From Another User Control?
Jan 11, 2010i have:
- Default.aspx;
- user1.ascx: 1st user control containing repeater;
- user2.ascx: 2nd user control containing a detail view of row.
In page.aspx i dinamically load the repeater inside a user1.ascx.
after i want to dinamically load the 2nd user control also in default.aspx by a button inside a user1.ascx.
How i can do this? I can't load user2.ascx inside user1.ascx but only in aspx page.
Web Forms :: Load User Controls Using JQuery Or Update Panel?
Sep 18, 2010i have a site, Masterpage --> content pages,
So as we anvigate between contnet pages i would like to have so nice JS effects, like loading icons, non page refresh.
from what i can understand i will not be able to dynamicly load the content pages using Jquery and this results in a page flash as new pages are renderd.
I could change the conent pages into user controls, how can i use jquery to load these dynamicly or use a update panel.
JQuery :: User Control Via Jquery And Control Events ViewState?
Jan 26, 2011 have a page that use JQuery to get markup of user control from a web services. it is successfully giving me what i want the markup etc.Jquery Code:
[Code]....
------------------
You can see that user control have a button that have a click event handler. i want this button to trigger on click. but when i click on this button i found server error "The state information is invalid for this page and might be corrupted."i can imagine what is going on viewstate is not valid for form for obivious reason......how can i fix this problem or update viewstate.
Web Forms :: Load User Control From Another User Control?
Apr 4, 2010I have a Master Page and in it I have two user controls,User control 'A' and User control 'B'.
so A and B are in the Same MAster page,I have a Button on Aand when ever i click a button I want to Load Usercontrol B(Call its Page_Load) Method...How will i do that?
this is the code but i get an error at line 'C' --- Null Reference Exception was unhandled
[Code]....
JQuery :: .Net Custom User Control Buttons (events) Not Firing In Jquery Modal Popup?
Oct 28, 2010I have a custom control, that has takes some information from user and submit to the database. it is working fine in normal aspx pages. but when i display that custom user control in jQuery modal popup. The events does not fire or lets say the data is not submitted to the database.
View 3 RepliesJQuery :: Triggering FancyBox From Dynamically Loaded User Controls
Aug 16, 2010I am following on my own solution to triggering fancybox from asp.net code-behind as here:
http://forums.asp.net/p/1577730/3966910.aspx
But this time I am stuck because my hidden_link control exists inside a dynamically loaded user control, and I do not know it's id, as the id's change to something like this:
ctl00_ContentPlaceHolder1_ctl01_hidden_link2
ctl00_ContentPlaceHolder1_ctl02_hidden_link2
ctl00_ContentPlaceHolder1_ctl03_hidden_link2
I am using
Literal1.Text = "<script>jQuery(document).ready(function() {$("a[id$='hidden_link2']").trigger('click');});</script>";
(which would find an <a> tag ending with hidden_link2) but this only triggers the fancybox for the first user control. How can I inject this script for the required <a> link only? Hope that makes sense.
What Are The Main Differences Of Defining A Control Statically Or Creating It Dynamically On Page Load
Sep 13, 2010I am working on a project which creates controls dynamically for a form in the page_load event, loads in their current values from the database and saves their values (using FindControl) when the user clicks the continue button. When I added a control statically in the .aspx page and followed their same procedure of loading the value in the page load and saving it on the button press I found that the value would not save correctly. It seems that it wouldn't save because the click event fires after the page_load, so the page_load of the post back reverted the value and the user entered value was not saved.
The strange thing is that by changing the control to be dynamically created just as all the other controls on the page and keeping the loading and saving the same it now works. Even though the page load still creates the control with the old database value. It seems like a very fundamental asp .net feature here but i'm just unclear as to what is going on. I suspect it is to do with the timing of creation and maybe when the view state kicks in.
