i m trying to develop a tabbed content slider. during this i am facing two problems.
first i don't know how to create the queue effects mean, i want to animate first div, after completion of first animation than second animation would be started.
for this i using the callback function here, but i want to know is there any other procedure to do this thing.
second there is jerk in the animation at second and fourth tab.
Currently i'm developing an apllication that sends sms via the asp.net. I'm using msmq for the queuing incase of multiple sending of sms. The wcf will then check for new queue and using teh queue to send out a sms. I've a few question.How do i create a new queue for the msmq via asp.net
I'm new to JQuery and recently started using the validation plug-in. I have a scenario where user have one of those type in your password and confirm your password textboxes. This is easilly accomplished with the "equalTo" rule how every my requirement is that once this failed the error message should be displayed and the textbox cleared. I assume there is no short and easy way todo this without writing javascript functions. point me in the right direction with a url or example.
Then a question to all you JQuery experts I've noticed "digits" and "number" to me they do the same thing? If not then explain the differance to me. Also how do I do a validation group in jQuery, similar to the asp.net validation controls assigned to a group and activated by a certain valodation enabled button?
I've implemented the JQuery Async Treeview (in APS.NET MVC2) and it works fine, but the problem is when the user adds new nodes to a tree (via another interface), there is no way to reload the tree and reflect the new tree structure.
The only way to see the changes in the tree is to shut down the browser (IE8). Trying .empty() on the tree on every reload doesnt do anything.
Heres the page source:
[Code]....
the URL /OrganizationStructure/Browse is only called when the tree is being built the first time..i cant for the life of me get it to rebuild even when the browsers "Refresh/Reload" button is clicked.
I have a textbox with calendar button. Here my requirement is I need to clear the text box when user clicks Calendar Image control.provide JQuery for this.
I have create user wizard control and i put validation control for all field but when i close user control that validators dint clear in firefox or but clear in IE
EDIT: ViewState does not change when browser is refreshed, so even if you write to viewstate it will not save the data. i am trying to store a Queue in a viewstate (to track postbacks and refreshes to stop a form from resubmitting). The Queue is only saving with a count of 1 (the first item that is added to it) no matter how many items i add.
// New Queue of strings private Queue<string> sTemp; private Queue<string> p_tempQue { set { ViewState["sTemp"] = value; } get { return (Queue<string>)ViewState["sTemp"]; } } //BasePage constructor public BasePage() { //create a Queue of string //sTemp = new Queue<string>(); this.Load += new EventHandler(this.Page_Load); this.Init += new EventHandler(this.Page_Init); } //In the 'page_Init' event we have created a simple hidden field by name 'hdnGuid' which is attached to the page on the first hit itself. protected void Page_Init(object sender, EventArgs e) { //initializing the hidden field //create a hidden field with a ID HiddenField hdnGuid = new HiddenField(); hdnGuid.ID = "hdnGuid"; //if it is the first time the page is loaded, create a new guid and assign it as the hidden field value if (!Page.IsPostBack) hdnGuid.Value = Guid.NewGuid().ToString(); //add the hidden field to the page Page.Form.Controls.Add(hdnGuid); } //In the 'page_Load' event we check if the hidden field value is same as the old value. In case the value is not same that means it's a 'postback' //and if the value is same then its 'refresh'. As per situation we set the 'httpContent.Items["Refresh"]' value. protected void Page_Load(object sender, EventArgs e) { if(p_tempQue != null) sTemp = p_tempQue; else sTemp = new Queue<string>(); //The hdnGuid will be set the first time page is loaded, else the hdnGuid //will be set after each time the form is submitted using javascript. //assign the hidden field currently on the page for manipulation HiddenField h1 = (HiddenField)(Page.Form.FindControl("hdnGuid")); //create an instance of the GuidClass GuidClass currentGuid = new GuidClass(); //set the GuidClass Guid property to the value of the hidden field currentGuid.Guid = h1.Value; //check to see if the Queue of strings contains the string which is the current Guid property of the GuidClass //if the are equal, then the page was refreshed if (sTemp.Contains<string>(currentGuid.Guid)) { //adds item as key/value pair to share data between an System.Web.IHttpModule interface and an System.Web.IHttpHandler interface during an HTTP request. System.Web.HttpContext.Current.Items.Add("IsRefresh", true); } //if they are not requal, the page is not refreshed else { //if the current Guid property in the GuidClass is not null or not an empty string //add the new Guid to the Queue if (!(currentGuid.Guid.Equals(null) || currentGuid.Guid.Equals(""))) sTemp.Enqueue(currentGuid.Guid); System.Web.HttpContext.Current.Items.Add("IsRefresh", false); } p_tempQue = sTemp; }
I have a web application where users can upload the photo. I do have a windows service running which takes the uploaded photo and crops it to different sizes. This runs in a specified interval. Photo will be visible to the user once after it's cropped. So once user uploads the photo and photo cropper has not yet run, they wont be able to see the photo. Due to this behaviour user thinks that there was some error uploading the photo and they will upload it again and again.
where the photocropper runs immediately when the user uploads the photos which is queued.
Originally Posted by wwb_99 grab the data sometime in the request, push to queue, process queue separately mainly because you don't want every request waiting on a CRM system that could be slow or down. This is a quote from wwb is another thread. What is the best to way to queue data and then process separately? Would you do it in the page_render event with a custom control? Would you use java script? Is there a post render event besides page_unload, or could you use page_unload?
I want to remove all elements from Queue A that are present in Queue N And end up with Queue R: 1, 2, 8, 12, 13. How do I do this in C#. Trying to work with someones API and they offer a way to get the two queues and I need to filter based on one queue returned.
Updated Code Example: I am using a custom data type ModuleDetails
Currently we are developing an ASMX, ASP 2.0, IIS 7 web service that does some calculations (and return a dynamically generated document) and will take approx. 60 seconds to run.Since whe have a big machine with multiple cores and lots of RAM, I expected that IIS tries its best to route the requests that arrive in its requests queue to all available threads of the app pool's thread pool.But we experience quiet the opposite:When we issue requests to the ASMX web service URL from multiple different clients, the IIS seems to serially process these requests. I.e. request 1 arrives, is being processed, then request 2 is being processed, then request 3, etc
you could have a workflow which is used for the submission and tracking of tickets, with the scenario that when the support desk goes home all of the active workflows generate an e-mail to the person who submitted the ticket saying that their ticket won't be looked at today.What is the best approach to do this?Is it a custom activity or some other method of enumerating all of the active workflows and firing an event/queueing an item to the workflow queue Clearly from the workflow perspective it would be nice to have an activity within it which is fired when,in the case of the example above the office closes.
Just wondering, in an ASP.NET MVC3 environnement with entity framework. Should the Unit of Work point to the service layer or the repository (and then the repository point to the service layer) ?
Ive saw two example:
* One where the unit of work and repository both have an instance to the service layer..
Link: Entity Framework 4 CTP 4 / CTP 5 Generic Repository Pattern and Unit Testable
Doesn't use a service layer but its obvious that one could be use in that case.
* Second where the unit of work have an instance to the repository which have an instance to the service layer..
But, when my SMTP server is down I want to put all the emails in a queue and when it recovers I want to send them one a time. Is there any way how to do this programatically in C#?
module thats available for asp.net that uses a queue to send email to an smtp server? the queue being the operative word here.. we need a proper fallback mechanism for storing any messages that can't be sent so that the send can be re-attempted later
I am trying to access an item default.aspx.vb which is in the class page in the app_code folder. Why am I unable to access this through intellisense?
If Not m_qKnown.Contains(HRefs(i)) Then
here is the class page. In my vs, m_qknown is underlined in blue. How come I can't access this queue in this code behind page for the default.aspx? In my intellisense, if I try to prefix it with the name of the page (Charlotte.vb) Charlotte.Webcrawler. after this dot there is no m_qKnown. There are some queuing event handlers and that's about it.
I'm trying to avoid adding more items to a queue if the item is already in the known queue. I'm happy to email this website application to anyone who would like to test it.
To meet the needs of a colleague, I must get plian text into a MSMQ message queue. Trouble is, Sytem.Messaging results in a body wich defaults to xml content. I had thoght that this would get round the problem - but it doesn't:
[Code]....
The body content looks rather strange actually - it reads:
54 65 73 74 20 54 65 78 Test Tex
74 20 4D 65 73 73 61 67 t Messag
65 e
Any thoughts on how to get rid of all those numbers and just have a plain text body?
I'm currently trying to interface our new intranet (ASP-MVC) with the web front end of our pager system. The pager system's front end is about 10 years old, poor interface and no documentation. To do this I have the form on the intranet post to the server, our server then sends an HTTP POST to the pager server that mimics what its own form sends.
While testing this for overloading (we sent about 10 messages almost concurrently) the pager server crashed, as the system is a black box and the only difference we noticed was the concurrent POSTs the least we can do is try to prevent this happening.I want to have all messages go into a queue that sends at most once every 5-10 seconds but I'm not sure how to implement this,
I didn't specify this earlier but the process should be synchronous from the point of view of the browser, ie webserver gets the http POST request from the browser, message is put into the queue, message is sent from the queue, webserver sends http response to the browser. This is not a high volume service and I expect simultaneous requests to be rare so response will be near instantaneous, it is more of a throttle to prevent potential issues with concurrent requests.
