When it creates a view using the list scaffold the headings are hard coded. I want to pull the headings from the data model, but no luck. I was assuming LabelFor would be the solution. I must be missing something basic.
View 2 RepliesNote: I'm working with MVC3 RC and Razor views.I've got this model:
[Code]....
I want to have a strongly typed create view for this model, that allows you to insert 1 to many addresses and phone numbers as part of the view. Ideally, the Action is strongly typed as well:
[Code]....
What would this view look like to facilitate creating 1 to many Addresses and PhoneNumbers, as well as having the state re-created correctly if the ModelState fails when posting? I've tried a number of variations including EditorTemplates and can't figure out how to do this.
I have a requirement in my application that, while saving the application, need to get all the value from drop down list and pass it to the view model. But application should not allow the user to select more than one item from drop down list manually, ie, only one value at a time. My view model is like ...
public class ListManagement
{
public IEnumerable<selectListItem> InactiveProduct { get; set; }
public string[] InactiveProductSelected { get; set; }
public IEnumerable<selectListItem> ActiveProduct { get; set; }
}
[code]...
I got in the controller action:
var reports = new List<Report>();
reports.Add(new Report {Title = "Inventory (monthly)"});
reports.Add.......
However, the words are truncated when passed to the view.
The words after the space is truncated.
ie. it just passed the word "Inventory".
In Model-View-Presenter what is the correct pattern to do a page that:
a) contains a grid for browsing a list of items
b) an alternate mode for editing single items .maybe you are toggling between two asp:panels.
Do you just make the presenter smart enough to do two types of presentations?
Make 2 presenters?
I'm new to this pattern and want to do it correctly. I understand how I would do this functionality on two pages. Just not sure what is the accepted practice when the browse and detail exist on the same page.
I'm using Model-View-Presenter framework. When Loading a page, I'm having trouble setting the selected item that came from the Database.
In view, I know I need:
protected void ddlStatus_SelectedIndexChanged(object sender, EventArgs e)
{
presenter.DdlStatusSelectedIndexChanged();
// what should this pass?
}
Then in Presenter:
public void DdlStatusSelectedIndexChanged()
{
view.DdlStatus = ???
// Should I pass the SelectedIndex?
}
I also think that part of my problem is that DdlStatus I have as a List.
Interface:
List<StatusDTO> DdlStatus { set; get; }
The best I found is here (but needs formatted!) ---> [URL]
I have been reading about different model for development
model view control mvc
model view presenter MVP
Model view view model MVVM
i belive MVC has two big Advantage over webform 1) TDD 2) More control on HTML
MVP is bit variation in mvc model. rapid development as well as 1) TDD 2) More control on HTML (correct me if i m wrong) see the below link
[URL]
Is not the @Model MyModelClass notation not supported in VB Razor Views? It's not working for me. What is the construct for it?
View 2 RepliesI am trying to populate a drop down list from my controller for a create action. I can display the dropdown as I want but when I cannot get the value to be stored in the database. My models:
[Code]....
Controller: [Code]....
View: [Code]....
This above snippet will show me the message "The value '50117dae-a7d7-4371-926f-7b1f7aaec133' is invalid."
if I change the line to @Html.DropDownListFor(ct => ct.CollectionType.CollectionTypeId, new SelectList(ViewBag.CollectionTypes as System.Collections.IEnumerable, "CollectionTypeId", "Title"))
@Html.ValidationMessageFor(model => model.CollectionType)
the page will not do anything - I believe this could be because the controller is trying to add a new CollectionType.
I have looked all over for elegant solutions to this not so age-old question. How can I lock down form elements within an ASP.Net MVC View, without adding if...then logic all over the place? Ideally the BaseController, either from OnAuthorization, or OnResultExecultion, would check the rendering form elements and hide/not render them based on role and scope. Another approach I have considered is writing some sort of custom attributes, so as to stay consistent with how how we lock down ActionResults with [Authorize]. Is this even possible without passing a list of hidden objects to the view and putting if's all over? Other background info: We will have a database that will tell us at execution time (based on user role/scope) what elements will be hidden. We are using MVC3 with Razor Viewengine. We're utilizing a BaseController where any of the Controller methods can be overridden.
View 1 RepliesI am trying to use a partial view for a file upload in a Create View.
Here is my partial view, I removed the submit button, as the view it is rendered in, should activat the form post:
@model dynamic
I've been used to decorating data model classes with data annotation attributes, but the purist in me baulks slightly at including purely presentational attributes such as display format here. I am, however, quite happy to keep validation centric attributes here. One good reason I have to continue keeping all annotations etc. in the data model is that my view model aggregates data model classes, e.g.
my ViewModelBase.DetailItem<TEntity> property in the view model is just a reference to an entity class in my data model. If I wanted to move presentational annotations to the view model, I would have to quite radically revise my design to one where I duplicate data model properties in my view model and use an object mapping tool to populate view model objects based on data model objects.
[code]....
Say I got a domain model as follows: (and my repository expect an instance of this object)
[Code]....
And a view model (which my views are based on)
[Code]....
At the moment I got it like this and have my controller action manually create a new Person object from the PersonModel object before passing it on to the repository, which does not feel right.
So I tried to have PersonModel inherit from Person and pass that to the repository (also tried casting the PersonModel to a Person object first), but that don't work out.
What's the right way to have PersonModel automatically cast to Person? I want to keep this logic as my current structure allow me to keep things really loosely coupled, with the repository layer not having a clue how it's being used.
Im just wondering how you go about creating dynamic properties on entities that generated from a database generated model.For example I have a UserInformation table. In that table it has basic information on the user (well derr) like user name, address details etc etc. I want to add a readonly property that concatenates the user's Name, Address details and Phone Number into one string that I can output to a view. Any ideas on how i would go about creating this dynamic property. This is just a simple example, i am wanting to do some more complex calculating and concatenating.
View 1 RepliesI need to bind a bunch of properties over my model entities. All of them uses the List<T> class. I already managed to write a model binder that can treat individualy types derived from that class, but i can't set the value of this property on the model. every time i check the model afer the bind process i see a list with 0 itens.
Here's how it runs.
After i post the values the model binder catchs up the types for bindingAt the custom model binder i check if this property is a List<T> typeIf it is then i perform the bind like it have to be, if not i let the default binder do the job.Finally i return the object binded. What happens next is the issue i've mentioned "i see a list with 0 itens" on the Model property.
Here is the code of Custom Model Binder:
[Code]....
I'm reading a bit of Pro ASP.NET MVC Framework and following a few tutorials written in the book. In the very first tutorial, creating a MVC site for dinner (PartyInvites), I encoutered this problem. While I try to reference some properties from Model class, the compilation error occured. Eg. the following code failed.
[Code]....
and the error message
Compiler Error Message:
CS1061: 'object' does not contain a definition for 'Name' and no extension method 'Name' accepting a first argument of type 'object' could be found (are you missing a using directive or an assembly reference?) I imported the Model folder into the controller too. I dunno what I'm missing here. Sorry, if it sounds a bit umm hard to understand cuz I just started picking up MVC this morning. Looking for any input.
I'm posting Json data to an action that has a model class as a parameter using the
JsonValueProviderFactory. Everything works except for any nullable properties in the model, such as double? and bool? - they always materialize as null, even if a value is posted.
I'm not sure if this issue is specific to the JsonValueProviderFactory, or MVC in general.
I'm trying to build a link to an external website using some properties of my model class in my view page, e.g. I want it to render as something like -[URL]where post-id would be pulled from the model (I'm using a strongly typed view model here - I can't use ViewData as there's a list of items being pulled back all of which need seperate links).I tried doing < a href="<% model.PermaLink(); %>">, where PermaLink is just some string, however the value doesn't get picked up.If I try < a href="<%= model.PermaLink %>">, I get an error - CS1502: The best overloaded method match for 'System.IO.TextWriter.Write(char)' has some invalid argumentsIs there any way to do this? I tried adding the runat="server" attribute, however this just linked to my local site and controller/model actions.
View 2 Replieshow can i apply string.trim() accross the website when saving or editting data on the model rather then on individual fields accross the site in the controller.
View 2 RepliesI have a strongly typed view. I get model passed into the view and then i assign model values to labels etc.
I would then also like to set Model values programmatically on .aspx page, like:
<%= Model.someValue = "foo"; %>
and then pass that model back to controller action and than access those values. I know that I can apply values to model like these:
<%= Html.TextBoxFor(n => n.someValue) %>
but in these case, this is not an option for me.
I have an entity object as model input in my view. Not sure if it's the best approach, but I use the object references to get values from a related object.Let's say I've got a car entity and a manufacturer entity.Here's how it would look in my view
[Code]....
I've get a nullreferenceexception where the car entitity does not have a reference towards manufacturer. I'd like to output a " " if no manufacturer exists.
've created a Search partial view and it works, except for my view model. What i mean is, the partial view sends a string to my ActionResult Method, but only a string, that is not related to the view model that the partial view is built in. If i tell my ActionResult method to receive the view model in which the partial view is built in, it always tells me that i have null values. Here's my code This is my partial view:
[Code]....
Now here is my Model in my MoviesSearch view model:
[Code]....
Now the actual MoviesSearchViewModel
[Code]....
Inside my Search controller i have this
[Code]....
And then i have this:
one thing that has been puzzling me since learning MVC2 is the following case scenario: I have a view which contains two latest news lists, a login form and a signup form. Every example I found on Views and View Models so far has a one-to-one example such as a simple login form etc. But how do I create a model that provides the properties and validation for a login and signup form and manages the data for the news lists. can I pass multiple models in the strongly typed view? When I created one model the form validation would fail as it expects all fields - login and signup to be filled. I am missing some advanced examples or information.
View 2 RepliesIf I look at the Razor View Engine, then I see a very nice and concise syntax that is not particularly tied to generating html. So I wonder, how easy would it be to use the engine outside asp.net in a "normal" .net environment for example to generate text, code,...
View 3 RepliesI want to change my project to use razor syntax. How do I translate a view to razor syntax?
also, when I add a new view, I don't see an option for the view engine to use. Is there one?