I try to run a Plain Vanilla ASP.NET MVC web site on my system under Azure, but the page does not start
I have been able to publish the same web page on Windows Vista Ultimate using IIS7.
Using Win7 32-bit for 3 months and didn't have problem with developing any .NET-based applications including ASP.NET apps.
Just upgraded my laptop's RAM 3 days ago and switched to 64-bit version of Win7.
When I'm working on installing IIS7 and .NET Framework 3.5 SP1, there's an error about not all features were installed for some unknown reason.
When I try to register ASP.NET using aspnet_regiis -ir in c:WindowsMicrosft.NETFramework64v2.0.50727, a dialog box shows with this error message:
"Operation failed with 0x80070643" and after I close the dialog box, another error message on the console command shows with this message: "An error has occurred: 0x80004005 Unspecified error".
Developing a web site in .Net 4. Very close to being complete with most functionality, so I thought I would attack what seemed to be a tough one (something I have not done): site content search.
I've been digging around for an hour or so, and I'm a little perplexed. How do I perform content search on an ASP.net website?
A few things I'll throw out there before you answer with something I've already seen and cannot implement:
I am developing on a Win7x64 computer using VS2010 w/TFS.Site has been converted to .net 4, and is in C#.Will not have access to put site on Windows Server 2008 for another month, but would really like to implement search if at all possible beforehand.All that said, can I implement searching via indexing? I've looked at using Windows Search, but nothing looked like it worked right. This site will be served up on a Windows Web Server 2008. Do I need to somehow develop against a Server 2008 to implement search via indexing?
I am running Visual Studio 2010 (as Admin), IIS 7 on Windows 7 x64. I am able to run the ASP.NET web site in IIS 7 without debugging just fine, but when I press F5 to debug it, I get: Unable to start debugging on the web server. Could not start ASP.NET debugging. More information may be available by starting the project without debugging. Unfortunately the help link is not helping me much and leads down a heck of a large tree of things. I checked the following:
Security requirements — I don't recall having to do anything special before. The worker process in IIS7 is w3wp.exe. It says that if it's running as ASPNET or NETWORK SERVICE I must have Administrator privileges to debug it. How do I find out if I need to change something here? Web site Property Pages > Start Options > Debuggers > ASP.NET is checked. Use custom server is set to the URL of the site (which works fine without debugging). Debugging is enabled in web.config. Application is using ASP.NET 3.5 (I want to move to 4.0 eventually but I have some migration to deal with). Application pool: Classing .NET AppPool (also tried DefaultAppPool). Surely it shouldn't be that hard to install IIS, VS, create a web site, and start testing it?
I have a custom membership provider and a custom role provider in a .NET assembly dll called Qws.Web. The full namespace path to the classes are Qws.Web.Providers.QwsMembershipProvider and Qws.Web.Providers.QwsRoleProvider They both inherit MembershipProvider and RoleProvider respectively When I include the assembly using a project reference in VS2010 it all works fine. The minute I publish the website and project to the staging server (using IIS7) i get the following error: Unable to find the requested .Net Framework Data Provider. It may not be installed. You can see the site at [URL] I've tried all of the usual stuff and been trawling the internet for the last two days.
1. The Qws.Web.dll file IS in the bin folder
2. My Web.Config file is below:
[Code]....
3. The providers are not in the GAC and not in the machine.config file as I only want them available for this site.
What is the right approach when users (authenticated domain admins) should be able to start batch jobs (usually exe files) from an IIS (7.x) aspx (c#) page? This is an intranet site. The batch jobs have to run on the web server as Domain Admins. The website pool is executed by network service or some similar restricted account in AD.
Approaches I can think of (and their disadvantages):
1. Start exe file with System.Diagnostics.Process.Start with another account. This feature is disabled in IIS 7.x, how do I allow it?
2. Create a sheduled task and call scheduled task-api. This unmanaged dll is giving VS compiler warnings because it's unsafe to call from managed code.
3. I suppose there's a better approach, because the previous suggestions doesn't appear safe or robust.
Usually in sub-folder we will limit the access right to some roles and this feature requires pre-defined database schema.
However, if i still want to use this role feature of asp.net, but I do not like the pre-define database schema, I want to extract role information from my own database table and bind it to the role.
I am using built-in asp.net Role and membership provider in my website. when user login to my system they are redirected to hompage. how should i code it. that when he click on login button page check its role and then decide where to redirect. Suppose user login with name John and "john" is "Admin" then application Redirect him to AdminPanel.aspx and if User john is normal "RegUser" Role then redirect him into Home.aspx.
View 1 RepliesI have set an image control in a web page. The image show correctly in desgin time but just show an "x" in run time.
I am using vs2008 installed in Windows 7. The problem didn't found when I used the vs2008 in windows vista.
I need to add a cert. for the NetworkService account as this is what Identity of my App pool is set to, but I'm not sure how to go about doing that. Here's the steps, I take: Bring up the run command and submit "mmc"When the Management console appears I click on File > Add/Remove snap-in.Select Certificates and click AddSelect Service Account, click Next twice Then I'm presented with a bunch of Service Accounts. The ones that kind of resemble what I'm looking for are: Network Access Protection AgentNetwork ConnectionsNetwork List ServiceNetwork Location AwarenessNetwork Store Interface Service Out of the choices above, Network List Service would be my best guess.
View 1 RepliesI am deploying my first ASP MVC project. The project runs just fine, I would like to take the next step and run this outside of my visual studio environment on my local IIS. I am running Windows7, Visual Studio 2008, and I have created a basic ASP MVC project. On my solution, I find the project I would like to deploy. I right click and select Publish. I have backed up C:inetpubwwwroot and would like to deploy there. I accept all defaults, and click the "Publish" button. The Output Build window shows 1 project failed.
Basically is says that it is unable to add any of the binaries to the site, copy files, create new directories. Access is denied. When I do click "Publish" at work, I don't get these errors. What do I have to do here to publish the website to make the website available to the rest of my home network? Also wwwroot appears to be readonly, but telling the folder to not be read only doesn't seem to help, it still appears to be readonly even after I've unselected this property in the property dialog.
There has been a suggestion that on Win7, you launch VS2008 as an Admin. While this does appear to work, I find it hard to believe that this is the "way" you do it.
i installed windows 7 and visual studio 2008 and sql server 2005 Now when I run my web projects, internet explorer opens but it says "internet explorer can not display the webpage", albeit when I put only "http://localhost" in browser it displays a page with iis picture.firefox didn't work when i had windows XP this problem never occurred.
View 10 RepliesI am trying to register the route collection in .net based on each session. The code I have works fine, you goto website/username and it loads the correct sub pages, but you have to restart the application to goto website/username2 to load those sub pages. But when the application is restarted the second one works, but then not the first one. Is there some way to create a different route collection per session not per application using system.web.routing.
View 3 RepliesWe recently converted the VS.2005 application into VS2008 in XP machine and it was working fine like compiling with out any issues and working as expected. But recently team upgraded laptops to Win7 when trying to compile it we have got issues then we changed the compiler settings to 'x86' and compiled it went good. But after that login screen came when ran the applciation without environment selection (production, DEV, Testing etc). basically we are getting this environment setup from system registry, we uderstand that Win7 is looking in different location hence no environment information is coming up..later we see that where the code is looking for environment environment and created environment keys in registry, after that environment infromation displayed in login screen but not able to login into applciaiton throwing exceptions like " Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG))"
View 6 RepliesI am trying to provide the reference of one of my web services from my asp.net web application in Visual Studio 2008 by clicking "Web services on the local machine.
However I am getting the following error:
There was an error while enumerating services on local machine: Active Directory Services cannot find the web server. A possible cause for this is an incompatibility between versions of Internet Information Server (IIS) on the client and the server. Another possible cause is that IIS is not installed on the local machine, or the user identity under which you are running may not have permissions to view websites on this machine. To view websites on this machine, make sure that you run Visual Studio as administrator. On Windows Vista computers with IIS installed, make sure that IIS Metabase and IIS 6 configuration compatibility feature is enabled.
I have installed IIS successfully and I am running Visual Studio as an administrator.
I just can't seem to get C# code to auto-format, despite having gone over all the Formatting options for c# to make sure they are correct. For example, I want brackets to auto-format to a new line, but nothing changes. I want catch keywords to automatically go to a new line, yet they don't. The options are checked in Formatting under C#, so what gives? HTML formatting works, and prop-tab-tab works in c#, but new line formatting and such does not.
View 1 RepliesI'm trying to run a simple console app on Win7 VS2010.
Here's the code:
using (FileStream stw = new FileStream(@"c:OrdersToday.pdf", FileMode.Create))
Why asp.net sql role provider does not allow to update the role name , whats its reasons.
View 5 RepliesI have a project which uses VS 2005 and .NET framework 2.0. I saved my project and did not change any codes. Before this Monday, my project worked as normal, after I enter user name and password on log on page, it would go to start page. (The log on page is called from another project that is located on my local machine.) Cause firewall issues happend on the Monday, I reinstalled .NET framework 2.0 to get debugging worked.
Now, my project can run like usual, but after I log on, the web page will direct to start page and redirect to log on page dymatically. I am sure the codes behind start page will never redirect browser to log on page and I didn't not change any codes. The redirect code in Global.aspx is : Response.Redirect [URL]
I need to initialize an object from the start up of an page and use the objects through out the particular page how can i do it. //Block to be initialized
XTContext.UserContext UContext = new XTContext.UserContext();
XTContext.Context ctxt = new XTContext.Context();
XTErrorCollection.ErrorCollection eContext = new XTErrorCollection.ErrorCollection();
ctxt = (XTContext.Context)Cache["sessionfContext"];
ctxt.eContext = eContext;
ctxt.uContext = UContext;
now i want to use the ctxt inside the page and control events. I tried to initialize it in page load but i cant access ctxt.
When I run my project and I'm looking at a View, the project runs that start-up page specified in my HomeController class, which is great. But if I'm looking at a class or a model, and I run the app, then it tries to make that class the start-up page and gives me the error "A project with and Output Type of Class cannot be started directly". So I have to close the error box, open up a random view, and then run the app. Is there a way around this? It shouldn't matter that I'm working on a class file when I run my app.
View 3 RepliesI just was issued a new PC that has Win7 (non-64 bit). We use SVN as our source control, and I pulled all the web projects down to the new machine. After configuring IIS, I compiled one project and ran. Almost immediately I get the error "Internet Explorer cannot display the webpage". I ran the diagnostics, and get the message "The remote device or resource won't accept the connection". Looking in the event viewer, nothing showed up. I had this running on a Vista Ultimate box, and even did a one to one compare of the settings between the two boxes, and things are the same, but obviously I've missed something. Any thoughts on what to investigate? How can I see a better message than the standard (already turned off Friendly Messages)?
View 3 RepliesGetting the below error while setting up application on Win 7 using visual studio.NET 2003.
Error:
cannot find the components for communiacting with the front page server extensions...
i have a page hosted on iis7 with os: win 2008 in 64bit
i tryed many codes to get ips for whois browser the page and all of this codes working fine in vs local in my computer but in proudaction server it is only give me ip: ::1 what is solution for this?
recint code i used it :
[Code]....
I get the message asking me to set strat page before debug. I have set the start page but still get the error.
View 6 Replies
