i installed windows 7 and visual studio 2008 and sql server 2005 Now when I run my web projects, internet explorer opens but it says "internet explorer can not display the webpage", albeit when I put only "http://localhost" in browser it displays a page with iis picture.firefox didn't work when i had windows XP this problem never occurred.
View 10 Replies
I just was issued a new PC that has Win7 (non-64 bit). We use SVN as our source control, and I pulled all the web projects down to the new machine. After configuring IIS, I compiled one project and ran. Almost immediately I get the error "Internet Explorer cannot display the webpage". I ran the diagnostics, and get the message "The remote device or resource won't accept the connection". Looking in the event viewer, nothing showed up. I had this running on a Vista Ultimate box, and even did a one to one compare of the settings between the two boxes, and things are the same, but obviously I've missed something. Any thoughts on what to investigate? How can I see a better message than the standard (already turned off Friendly Messages)?
View 3 RepliesGetting the below error while setting up application on Win 7 using visual studio.NET 2003.
Error:
cannot find the components for communiacting with the front page server extensions...
I am deploying my first ASP MVC project. The project runs just fine, I would like to take the next step and run this outside of my visual studio environment on my local IIS. I am running Windows7, Visual Studio 2008, and I have created a basic ASP MVC project. On my solution, I find the project I would like to deploy. I right click and select Publish. I have backed up C:inetpubwwwroot and would like to deploy there. I accept all defaults, and click the "Publish" button. The Output Build window shows 1 project failed.
Basically is says that it is unable to add any of the binaries to the site, copy files, create new directories. Access is denied. When I do click "Publish" at work, I don't get these errors. What do I have to do here to publish the website to make the website available to the rest of my home network? Also wwwroot appears to be readonly, but telling the folder to not be read only doesn't seem to help, it still appears to be readonly even after I've unselected this property in the property dialog.
There has been a suggestion that on Win7, you launch VS2008 as an Admin. While this does appear to work, I find it hard to believe that this is the "way" you do it.
So bit the bullet and installed vs2010 finally. However, when loading an existing vs2008 project, I am getting this error: "The project type is not supported by this installation." the only thing special about this project is that it's a "web application projects" type. what I've tried so far are these steps, but none of these solve my problem:
(1) run "devenv /setup"
(2) regsvr32.exe "%ProgramFiles%Microsoft Visual Studio 10.0Common7IDEProjectAggregator.dll"
i'm working on a project (ASP.NET). When i run my project it runs on IE6 because i'm using windows xp. I want to run it on other browsers like firefox, opera etc. can any one tell me how to do this. I've set the default browser as opera frm control panel but it didn't worked.
View 3 RepliesI am developing asp.net web application on visual studio 10. I want to move this project to another machine running visual studio 10. I have databases and style sheets with my project. Whats the best way to copy this project to another machine preserving all dependencies.
View 2 Replieswhen i install the setup ,i want to install whereever i want That means ,i want to browse the mycomputer folders
View 2 RepliesI am having a silly beginners problem with ASP.Net/Visual Studio 2010. I would like to integrate a number of third party packages into my asp.net MVC app (e.g. CKEditor, TinyMCE.) During the prepwork I sooner or later end with instructions to the order of "copy the package into your project/scripts directory". Sounds easy but I still can't figure out how to do it.
For the time being I trick visual studio into adding the package by adding a blank directory, then go to windows exporer to copy files into the directory, then go back to visual studio to add them one by one. That works for a few javascripts but not for a more complex package. Clearly there must be a better way to add a third-party hierarchical structure to a project, right?
I am trying to open telerik Q1 MVC examples in Visual studio 2010 and I am getting an error
C:Program FilesTelerikExtensions for ASP.NET MVC Q1 2011SourceTelerik.Web.Mvc.ExamplesTelerik.Web.Mvc.Examples.csproj : error : The project file 'C:Program FilesTelerikExtensions for ASP.NET MVC Q1 2011SourceTelerik.Web.Mvc.ExamplesTelerik.Web.Mvc.Examples.csproj'
cannot be opened.
The project type is not supported by this installation.Do I need to change anything in my web.comfig file in order to make this run. Below I pasted my web.config file.
[Code]....
i have developed simple login form as my web application. I wanted to connect it with database to add some more features. However, my VS 2008 was unable to connect with SQL Server 2008 on my laptop, I thought, I should copy and paste my entire web application folder into my web space provided by university. I have done that through ftp. However, when I have tried to debug my application (through remote desktop connection on my university server) I got some weired error.
Furthermore, when I have tried to debug my application on my laptop, it gave me an error that "Web.config file has been renamed, changed or deleted........."
So, my question is, "Is it possible to copy and paste your project simply like you do with your other files (songs, movies or photos etc...) and can debug (source as well as destination) without doing any further editing or chages?"........If no, what are the other alternatives?......
I want to ask about how to create a setup project for asp.net web application
In a way that the .cs files didn't appear when executing the setup
Like when you publish a web site only the aspx files appear and the dlls no cs files
I just completed converting my vs 2005 web app to Vs 2008. Question:After I make changes to the app and before I move the changes out to our web server, what must I consider for the web server?1) During conversion I allowed the project to convert from 2.0 framework to 3.5. On the web server, I assume it needs to be upgraded to 3.5 as well. Can I upgrade directly from a site or would you recommend I install VS 2008 on the web server as well (which comes with 3.5)? 2) Do I need to change the application name or virtual name on the web server or can I keep it the same?
View 3 RepliesI have a web app and a web setup project in VS2010. By default, when I install my web app using my web setup project, in the Installation Address folder dialog window, the default Application Pool is DefaultAppPool. It has been stated in the MSDN documentation that we can change this default TARGETAPPPOOL, say to "ASP.NET V2.0". Here is the excerpt from MSDN... "The Application Pool list shows the available application pools on the target computer, and the default setting is named DefaultAppPool. To change the default application pool in your Web setup projects, you can use a post-build action to update the name of the application pool in the MSI." Is there anybody in the group knows the syntax on setting the TargetAppPool to another pool that exists in IIS, e.g., ASP.NET V4.0 CLASSIC?
View 1 RepliesI am using VS2008 under WINXP, I have a project which the ASP.NET version is set to 3.5.
The code: Response.Write(System.Environment.Version.ToString) prints out 2.0.50727.3603
After checking in http://en.wikipedia.org/wiki/List_of_.NET_Framework_versions I found out that the ASP.NET version is 2.0 SP2.
How can I set my project to ASP.NET 3.5 ?
I made Web Setp Project for a web application, I need to change virtual directory property for the web application.
This virtual directory is linked to TARGETVDIR property which is disabled in the property grid.But I need to control it, I searched for this and I found that the only way is to use orca.exe and change msi using it.
Can I amke another solution to avoid making modification on nsi after build???
I am running MS Vista with the 3.5 Framework. I just loaded VS2008 Express and VB 2008 Express. I was able to create a ClassLibrary project (vbproj) in VB2008. However, when I try and open that in VS2008, I get an error : vbproj cannot be opened because its project type is not supported. The thing is that I cannot create any projects in VS2008 excecpt for Blank Solutions, because there are no templates available to choose from when I attempt a FileNewProject in VS 2008.
View 3 RepliesCRRedist2008_ia64.msi installs the crystal reports runtime dlls in the GAC.
However, I would like to install these dll in the bin directory of my .NET project and deploy. I copied all the Crystal Reports dlls which gets installed by CRRedist2008_ia64.msi in the GAC ino the in directory of the project and referenced these dlls in my project. However, I still get the following error message.
Is there a way to not install the runtime but copy the dlls manually?
Server Error in '/***_net' Application.
An error has occurred while attempting to load the Crystal Reports runtime.
Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly.
install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required. [URL]
Description: An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code.
Exception Details: CrystalDecisions.CrystalReports.Engine.LoadSaveReportException: An error has occurred while attempting to load the Crystal Reports runtime.
Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly.
install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required. [URL]
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
I installed vs2003.net on sbs2003 with IIS6 (.net framework 1.1) I created my first app, put a label on webform1 and run the project (debug)
1 - messagebox: "Error while trying to run project: unable to start debugging on the web server. The project is not configured to be debugged (I did a lot of searching, found tons of so-called solutions, but neither works)
2 - run the project from the menu Start without debugging. I got a server-error: <authentication mode = Windows in web.config)
Two questions:
a. when the app runs under VS.2003 it uses IIS ?
b. if not, why doesnot run the app ? if so, which website it uses in the IIS-manager (is that the Default website or other ?). What happens when I delete all the websites in IIS-manager and run the app in VS2003 ?
I started working on an Asp.net MVC website using Visual Web Developer Express 2008 a while ago. Just recently, I managed to get my hands on a copy of Visual Studio 2008 Professional (through DreamSpark ). I installed the Service Pack, and also the MVC2 files for Visual Studio.
However, now I can't open my project anymore. When I try to open the solution in Visual Studio, it tells me that the project type is not supported. Does this mean that I have to resort to using VWD Express again? Is there perhaps some way that I can edit the project file so that it will load and compile correctly?
Note: I installed MVC2 through the Web Platform Installer, and it says that it installed successfully. However, I notice that MVC references in my unit-test project don't seem to be resolved either - is this perhaps because MVC2 isn't actually installed properly?
I have installed and repaired .NET 4.0 already, and I can not figure out why IIS will not run 4.0 applications. I am running Windows 2003 R2, Sp2. IIS 6.0 I created a new ASP.NET Application in Visual Studio 2010, and published it to a site on my IIS. In IIS, I have selected it to run with 4.0, and my web.config also says to compile in 4.0 My First error was : Unrecognized attribute 'targetFramework'. Note that attribute names are case-sensitive. (C:Inetpub...web.config line 22)
After some research, I found that my IIS had no v4.0 Web Service Extension setup. I thought this was odd, but I manually added it. New error was : The current identity (NT AUTHORITYNETWORK SERVICE) does not have write access to
C:WINDOWSMicrosoft.NETFrameworkv4.0.30319Temporary ASP.NET Files'.
After some research, I found I needed to add this folder, and give all rights to it. I know something is wrong, I shouldn't have to do this. My application is still erroring.. failing to load my ReportViewer :
Exception message: Could not load file or assembly 'Microsoft.ReportViewer.Common, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.
My research and I think my aspnet_regiis did not run properly.. so I trieto run this myself: but I get this error!!
-aspnet_regiis.exe - Application Error
-The application failed to initialize properly (0xc0000005). Click on OK to terminate the application.
I wonder how to add a project template called Intelligence Reports, something like that, to Visual studio 2008. I have SQL 2008 installed. Do I need to install some updates to get Intelligence Reports template to Visual studio 2008 ?
View 1 RepliesWhy I don't have publish or add a deployment project in my visual studio express 2008?
View 7 RepliesI have Visual Studio 2008 Standard Edition- Version 3.5 SP1 (9.0.30729.1 SP).I've noticed when working through examples they show a window, Create Unit Test Project, but that this window never appears when I follow their steps.Do I need to go somewhere and check a box so the program will give me this window?Does this mean VS2008 didn't install correctly?
View 2 RepliesI used to develop web application in the XP with Visual Studio 2005.Now I have moved to the Windows 7 environment. The .Net web application works fine in browser, but I have problems to open the project in the VS2005 SP1. I have already installedService Pack 1 for Vista and Update to support Web Application Projects updates. I surelly have IIS running on my Windows 7. I'm running VS2005 as adminI get error from VS that "Unable to read project file 'abc.vbproj'. The Web Application Project ABC is configured to use IIS Web Sites, you must install all of the following Windows components.- Internet Information Services- IIS 6 Metabase and IIS 6 Configuration Compatibility- ASP.NETIn addition, you must run Visual Studio in the context of an administrator account etc.
View 2 Replies
