I've implemented a validation through:
foreach (var issue in data.GetRuleViolation())
{
ModelState.AddModelError(issue.PropertyName, issue.ErrorMessage);
}
But at the client side I am not able to take the benefit of ValidationSummary as the call is being made by AJAX. What is the right approach on validation.
I have a async file upload control and I am doing client side validation for Image."OnClientuploadstarted" I am doing the client side validation.My validation is working fine but my problem is that the file upload control text box goes green (i.e file is loaded on the server) even if the validation fails which is I dont want.What I want is when the client side validation fails the file does not gets loaded on the server and the Async file upload textbox does not goes green.I have goggled but have not found a suitable solution.
View 4 RepliesIf I have something like the following:
<asp:TextBox id="test" runat="sever"></asp:TextBox>
<asp:RequiredFieldValidator runat="server" ControlToValidate="test"
ErrorMessage="Required"></asp:RequiredFieldValidator>
<asp:Label runat="server" id="lblStatus"></asp:Label>
if in the code behind, I set the label to "You must enter a value if the textbox is empty" to validate it on the server side and this is fine, but if javascript is enabled, I don't want to show the client side validation and the server side label together. Is this something where I would just have to disable the client-side validators if javascript was enabled?
I have implemented customised registratio page by extending the membership provider using profile provider.I successfully registered the user .Now i want to validate the fields of registration page.Built-in Registration page has builtin validation messages.
Bu in my coding i am not passing model to the registration action, instead i am passing properties.So if i Use If(ModelState.IsValid) it is always gives true even i am not filling any fields .but after it throws an exception but not displaying error messages in the page.tell me what i have to do.How i am getting my validation messages.
I saw Account Models class in that for register Model built in validation conditions are there.So i am also writing like that for my properties.
[code]....
I am creating a custom 'control' which is simply made of two html inputs [type=text] but can't figure out how the validation will work on the view end.
I want to treat these 2 inner controls as asingle control so when a error is added to modelstate both of these inputs are highlighted in the view and a single validation message is shown.
I am using VS2010 and .NET4 for a web app. I have a script manager/update panel that has a couple of grids.
The client just leaves the page opens and views an updated grid every 30 seconds or so.
I want to refresh the grid by calling the server side method to load the grid, but not load the whol page using meta refresh or similar (too much screen flicker and unnecessary bandwith).
Is it possible to set some timer using javascript or something and call a specific server method to refresh controls?
When i use Validator callout extender and as well both client side java script validation , both are not working at a same time.I use java script code for dynamic checkboxes to be atleast one checkbox must be checked.When i use onclient click only javascript validations are fired, when use onclick function javascript code is not working.
View 7 RepliesI have the following code:
[Code]....
The file is validated using FluentValidation. So if the file is valid (Is CSV and less than 400 KB) then the ModelState is valid.
The problem is that if the ModelState is valid then I need to parse the file and here some errors can occur:
[Code]....
Can this be done?
I mean the ModelState was valid but sudenly it is not valid anymore.
I'd like to disable ModelState validation messages and keep my data annotation error messages.
When I update model, message "The value '' is invalid." apears in ModelState. I know that I'm trying to assign null to not nullable property, but I have my own validation and message.
I use something like this
[Required(ErrorMessage="Blahblah some error")]
I want user to see my message "Blahblah some error", but not stupid message: The value '' is invalid.
want to know that can we validate a control which is out side a form element in asp.net(server side validation)and outside a form element in html(client side validation) let's take a closer look
<html>
<body>
<input type="text" name="first name"/>
</body>
</html>
can we apply clien side validation on above text box by java script ?in asp.net
<form runat="server">
</form>
<asp:TextBox ID="TextBox1" runat="server"></asp:TextBox>
I'm interested in identifying a means to verify the server-side validation is performing as expected, but need to bypass the client-side validation being done using ASP.NET validation controls. To test this, I've tried using the form Poster add-on to Firefox that allowed me to get/modify the page contents and post it, but the .NET framework interpreted the submission as harmful and threw an application error ("A potentially dangerous Request.Form value was detected from the client").I've created a WinForm that includes a WebBrowser control and I'm able to manipulate the contents of the web page and invoke the button click, but am interested in seeing how to allow a postback with invalid input values. I don't want to assume the server-side validation works (even though I do check if Page.IsValid on the server on postback).This submits the web form in the WebBrowseer control and the expected client-side validation fires:
extendedWebBrowser1.Document.GetElementById(formButtonName).InvokeMember("click");
This is how I've manipulated some of the page contents (this just prevents submission):
mshtml.IHTMLDocument2 doc = extendedWebBrowser1.Document.DomDocument as mshtml.IHTMLDocument2;
string html = doc.body.innerHTML;
html.Replace("Page_ValidationActive = false", "Page_ValidationActive = true");
doc.body.innerHTML = html.ToString();
extendedWebBrowser1.Document.GetElementById(formButtonName).InvokeMember("click");
my page is using an UpdatePanel to do some ajax function after a button click. So here is what I got.
I have a textbox and a button.. The button clicks and the animation fires... But i dont want that, I want to validate the textbox and if everything is ok then fires Animation. Here is the code. My question is how can I fire this animation after all validations are ok?
[Code]....
I have a VB.NET ASP.NET webserver program running. One or more VB.NET clients are making use of it. Nothing special so far. As far as I know, the server is not really aware of the clients. Clients can request data. But is it also possible to let the server call-back a specific client when something happens? So that the client doesn't need to poll?
To be more specific, this server is connected with hardware modules. Clients could be terminals that show the status of a sensor for example. When a sensor gives an "alarm" value, it would be nice if the server could pass that alarm towards the clients. Instead of letting the clients to check each X seconds if that alarm is active. Would be a waste of energy, especially because the chance this alarm goes off is almost zero...
I have a simple WCF service that I call server side from code behind via a service reference. It's used for validation and works and was automatically setup by Visual Studio and is using SOAP I think because the binding is wsHttpBinding.
I want to use the same WCF service, but call it client side from jQuery using ajax(). I'm trying to implement it by way of these instructions.
But if I make the changes to get the client side call working, I have to add the decoration below which I think will break what works on the server side and also change the system.serviceModel section in web.config.
[WebInvoke(Method = "POST",
BodyStyle = WebMessageBodyStyle.Wrapped,
ResponseFormat = WebMessageFormat.Json,
RequestFormat= WebMessageFormat.Json) ]
How do I have a WCF service that can be called both from the server-side and client side (jQuery/ajax)?
Or put another way, this may be incorrectly worded, can an endpoint have multiple bindings?
I have MaskedEditValidator, which set u pt ovalidate datetime entry into text box. After that the button (html button input control )is pressed in order to start some process. Button is running the client side function (JavaScript).
Now in case of wrong input validator shows proper message, but how I can prevent button to be pressed and start the process. I.e. is it possible to check on client side the status of the validation?
As they have given option to pass typeof() as first parameter and min-max value.Is there any way we can implement range validator attribute for date by using typeof(datetime) ?please let me know if anyone has implemented same ?
View 1 RepliesHow can this be done? Does this exclude the UpdatePanel functionality when it's done?
View 1 RepliesI have a username textbox on a form, that has a few validation rules applied to it via the DataAnnotation attributes:
[Required(ErrorMessage = "FTP login is required")]
[StringLength(15, ErrorMessage = "Must be 15 characters or fewer")]
[RegularExpression(@"[a-zA-Z0-9]*", ErrorMessage = "Alpha-numeric characters only")]
public string FtpLogin { get; set; }
I also have a button next to this text box, that fires off a jQuery ajax request that checks for the existence of the username as follows:
<button onclick="check(this);return false;" id="FtpLoginCheck" name="FtpLoginCheck">Available?</button>
I'm looking for a way of tieing the two together, so that the client-side validation is performed before the call to the "check(this)" in the onclick event.
Edit: To be more clear, I need a way to inspect or trigger the client-side validation result of the textbox, when I click the unrelated button beside it.
Edit: I now have the button JS checking for $("form").validate().invalid, but not displaying the usual validation messages.
I have a page that contains a custom tab control. When you click different tabs, it does a an ajax callback. During that ajax call, the code dynamically loads a different control based on which tab was clicked, then adds it to the appropriate tab. So basically I have some code that does a switch statement, uses LoadControl(), then adds the control in.
The issue I'm having is that none of the javascript within each of those controls that gets loaded is getting registered on the page. Based on this thread:
[URL]
I thought I just had to switch from using Page.ClientScript.RegisterClientScriptBlock to ScriptManager.RegisterClientScriptBlock. I did that, but still nothing. Am I misunderstanding something about the ScriptManager? I want the javascript to be registered from within the dynamically loaded control, which happens to be loaded during an AJAX call.
I'm calling a static Page method via javascript that takes between 5s and 10 min. I'd like to give my user the choice to either continue waiting for the request to complete or not, and use window.setTimeout() to check back every 30s.
I've tried both location.href = '/newpage.aspx' or firing a button's click handler (which does similar redirect) to redirect the user prior to completion of the page method, to no avail. I can immediately send user to a simple html page, but a redirect to any aspx page involving server-side appears to block. When the page method finally completes, the redirect does succeed.
Is this:
a browser issue? If all modern browsers support at least 2 concurrent requests per domain, why wouldn't this work?
a framework limitation? a desirable design pattern or even possible? I've checked, and after redirecting to an HTML page, the original request continues processing (db updates, no problem).
I try to create a asp.net mvc 2 application.
My DropDownList won't be validated!
I have a core model class called Animal with some attributes and the same for the class Genus. These classes are mapped to nHibernate.
[code]....
Here is the code I have so far:
[code]....
When I click submit, It does the validation on the server side, I kinda like it to validate on the Client instead of taking a trip to the server right away.
I am migrating my application to MVC3 and getting this error message Validation parameter names in unobtrusive client validation rules must start with a lowercase letter and consist of only lowercase letters or digits.How can I ovoid it without going and modifying all my ViewModels
View 10 RepliesI am trying to create a custom password validation attribute which has these requirements
1. cannot be empty.
2. doesn't contain space or other special chracters, which I'll define later.
3. length is between 6 - 12
[Code]....
it works fine on the server-side but I'd like to make this work on the client side as well, so I created a PasswordAttributeAdapter class
[Code]....
and in global.asax I added
[Code]....
How to send the modelstate errors or any other exception to the view via ajax?
View 3 Replies