Moving The Default.aspx File And Code-behind Into A New Folder?
Jan 15, 2011
I want to use authntication which apparently only work on folders. Thus, I wanted to move the Default.asp file into a new folder that I created. When I tried doing this by cut and paste I ran into problems. I changed the reference in the first line of the aspx file "Page" but the code behind VB file no longer sees the aspx page. In other words, the reference to contorls like Listbox1 show up being undeclared.
Is there a way to move the Default file and the related code behind file to a folder so everything works?
View 4 Replies
Similar Messages:
Jun 25, 2010
I am developing web application using csharp. How can I change the file name when moving it from one folder to another?
The code I am using is below?
[Code]....
View 4 Replies
Aug 19, 2010
How can I setup the code in default.aspx to automatically direct the user to the default page for the application. If the user types the server name as in http://MyIntranet, I want them to be redirected to [URL]
[Code]....
IIS threw back the error that the operation requires IIS integrated pipline mode, which obviously isn't available because we're running IIS6.
View 3 Replies
Jul 17, 2010
For some time now I am trying to figure out how I can refactor some of my code to reduce redundancy throughout my application. I am just learning the basics of OOP and can create simple classes and methods but my knowledge is limited in terms of practical applicability. The following bit of code illustrates my frustration:
[Code]....
This bit of code is used on several pages of my project in the pages codebehind file. How can I move this to a class file. I don't know how to reference an object like a gridview in a class because it does not exist like it does on the actual page.
View 2 Replies
Jun 9, 2010
I am using quite a few AJAX toolkit extenders e.g. RoudnedCorners extender, Watermark extender, etc. in my webpage. The problem is that these extendersadd a lot of script code to my webpage causing performance issue. Also, the presence of these extenders works against search engine as the actual content gets pushed down the page, thereby being risked skipped by search engines.
Is there any way where I can move these AJAX control extenders and/or their generated scripts to a different file ?
View 2 Replies
Mar 29, 2010
Actually I want move files from one folder to another folder after reading files.So while moveing the files i want rename those file
My Code is :
[Code]....
showing some error also the folder using another process, How to rename while moving..
ex:ss.xls need to 20100429.xls
ss1.xls need to 201004291.xlx
it should increment file name
View 2 Replies
Aug 5, 2010
Can i retrict the windows dialog to select only files from the selected folder and avoid to navigate from another folders?i am selecting from server side.
View 5 Replies
Oct 19, 2010
I have an iframe in one of my aspx files which is located in folder1.
I have a line of code in my page iframe1.Attributes.Add("src","filename.aspx");
The filename.aspx file is in folder2, so the above line throws an error..... The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly.Requested URL: /folder1/filename.aspxso, its basically looking for the filename.aspx only in folder1, how can I make it point to the other folder. I tried iframe1.Attributes.Add("src","folder2/filename.aspx"), but its of no use.
View 2 Replies
Oct 20, 2010
I want to automatically create a menu for all aspx file in a web folder using the asp:Menu.
Is there a way to automatically generate the MenuItems for each aspx file when the page loads? The directory is "~/Refernce".
<asp:Menu ID="menu"
runat="server" CssClass="menu" EnableViewState="false" IncludeStyleBlock="false" Orientation="vertical">
<Items>
<asp:MenuItem NavigateUrl="~/Reference/Default.aspx" Text="Home" />
<asp:MenuItem NavigateUrl="~/Reference/HTML.aspx" Text="Reference" />
</Items>
</asp:Menu>
View 1 Replies
Mar 11, 2011
Is it possible to hide the file names ex: default.aspx after my domain name and is it recommended?
I want users only to see www.domain.com whether they are on domain.com/about.aspx or any other pages, only domain.com should be visible in the url.
View 6 Replies
Dec 2, 2010
Is there a way to call a public function from a class?
[code]....
View 4 Replies
Nov 17, 2010
In my asp.net application on Windows Server 2008, I have code like this
tempfile = Path.GetTempFileName()
... Write data to tempfile ...
File.Move(tempfile, storageDir + fileName)
This works just fine. The problem is afterwards when I am trying to access the file from outside of ASP.NET. I get access denied, even though the user I am accessing from have (recursive) read rights to the storageDir folder.
It seems that the moved file doesn't inherit rights from the folder it is moved into. Is this correct, and if so, is there an easy way to fix that?
Right now as a direct fix I have changed every instance of File.Move() in my ASP.NET application to File.Copy() + File.Delete(), which seems to fix the problem.
View 2 Replies
Mar 14, 2011
I am working solo on an Asp.net/C# project created by someone in the past. I created two new web forms, and then built the prjocect and did the deploy using a TFS team build project. For some strange reason, my Aspx file is not getting copied to the destination DEV server. It does get copied to a temp folder on that server, but in the end, the team build is failing and not copying over the new Aspx file.
So until I figure out how to fix the team build script, is their a way to just copy the Aspx file out to the desired server location? That as well as copying out a dll which is associated with the build file?
View 3 Replies
Feb 18, 2010
I want to move some class libraries (server controls in a .NET 4.0 solution) from one folder in windows explorer to another.
How can I do this and not break anything in the actual .NET solution?
View 1 Replies
Aug 22, 2010
I created a ASP.NET project under Visual Web Developer 2008. Under that project I had a Database (along with ASPNETDB.MDF) which has about 3/4 tables (I had SQL server 2008). Everything was working fine (like insert, delete, etc.). And I was able to view the tables in database explorer view.
Then I had to format my computer for some reason and I copied the whole project in a USB drive and then after formatting the computer I copied the folder and tried to open it in Visual Web Developer (now I have VWD 2010). I can see the both Database under App_Data folder (ASPNETDB.mdf and the DB I created). ASPNETDB has all the tables and data as expected. But I do not see the tables under the DB I created.
View 8 Replies
May 20, 2010
I am hoping I am in the right place for this, I have a web application which has been running for about 4 years recently I updated my Ajax to the most recent version it continued to work OK then I changed from ScriptManager to ToolkitScriptManager now I get an error moving from my default page
View 1 Replies
Jan 19, 2011
I am trying to secure very mixed content that is located in an ASP.NET directory. For purposes of this question, it can be ~/MyApp/.
I want all of the content in the directory and its subdirectories restricted to authenticated users. The default.aspx page, though, should be accessible to everyone. This is the web.config in that directory:
[Code]....
Now if you are an unauthenticated user, everything works fine if you request [code]....
The problem occurs in that visitors do not always request "Default.aspx". We have a default document configured so that they get Default.aspx even if they just request "/MyApp". An authenticated user works fine, but an unauthenticated user is directed to the login page.
Now I know that essentially this happens because even though the request for "/MyApp/" will actually end up serving up "/MyApp/Default.aspx", the security system is only checking for "/MyApp/" since that is what I requested. That is then getting the default security for the directory.
How can you configure an exception to allow access when no particular file is requested in the directory??
Is there some dependency between DefaultDocumentModule and UrlAuthorizationModule? In this environment, the UrlAuthorizationModule has been removed and re-added in order to make sure it fires for non-managed requests. I would not expect that to change the order of execution, though, since UrlAuthorizationModule usually goes after DefaultDocument.
A workaround could be to set up the opposite security with the directory being open, and then trying to secure individual files. Because of the (changing) number of files, and extensions, etc, and the fact that you cannot use wildcards in a <location>, this is not really a workable solution for me.
View 1 Replies
Jan 27, 2011
I have requirement to copy or move file from webserver app folder to local file system folder (user selected). How is it possible in ASP.Net.
On my page i have textbox and browse button and user clicks browse button to select folder and there is Copy/Move button and when clicked the files under webserver folder should be move to the user selected folder. The webserver folder path is available to application.
View 1 Replies
May 21, 2012
I have code that needs to run in two deployments. Let's call them deployment H and deployment W.
The code is already running in deployment H, and there's an aspx page and an aspx.cs code-behind file. The code is compiled for framework 2.0 which is the lowest common denominator of the two deployments. Deployment H has its own logos and styling which are coded in its aspx file.
Deployment W now wants to use this same page, but it wants its own logos and styling. There are also additional fields on the page that deployment H doesn't need.
I think it's easier to maintain one code base which is why I want the same code-behind file, but I am having trouble figuring out how to set this up in Visual Studio. Orginally, I was going to have two projects, one for W and one for H, but I'd have to make the same changes to both files when some of the common areas changes.
View 11 Replies
Feb 16, 2010
How to redirect Default.aspx to Default.aspx?id=1
View 7 Replies
Mar 18, 2011
The code I have entered below works fine in an .aspx file, however when I seperate the C# code into an aspx.cs file I get the red underlining for both 'UserAccountWizard' and 'RegisterPatientWizard'. Is there any solution to this as I'm completely baffled right now. Here is all of the code in the .aspx file:
<%@ Page Title="" Language="C#" MasterPageFile="~/BCUHealthCentreOnline.master" CodeFile="~/App_Code/PatientRegister.aspx.cs" Inherits="PatientRegister" %>
<%@ Register Assembly="AjaxControlToolkit" Namespace="AjaxControlToolkit" TagPrefix="asp" %>[code]....
View 6 Replies
Oct 18, 2010
How to display text in another Web form
In Default.aspx I have a GridView. How to Default2.aspx, show data from Default.aspx?
I have a textbox on Default2.aspx.
In Default.aspx I have a GridView.
Data from the GridView I want to show the textbox (Default2.aspx).
View 2 Replies
Feb 26, 2011
For example, I have master page MyMasterPage.aspx and content page MyDefault.aspx. I have many UpdatePanels at MyMaterPage.aspx, and also I have many UpdatePanels at MyDefault.aspx.
[code]....
I want JavaScript functionClickMenu(this) at input button [id="ButtonMaster1" @ MyMasterPage.aspx] pass its value ["Menu-1"] into text box [id="TextBoxDefault1" @ MyDefault.aspx], and then performing update / doing post-back to server ONLY FOR UpdatePanelDefault1.
I am looking forward an example code for JavaScript functionClickMenu(this).
View 4 Replies
Nov 28, 2010
First of all, thank you for the attention.
I am having some trouble, I am very new to asp.net, and the last problem I had, I spent about 59 hours trying to solve, Now I have a new one !
:D well, I guess this is part of the learning process...
Well, in Visual Studio 2010, I clicked New Website. @ C# language, ... The template it gives is pretty nice, it creates a database MDF file, and a login/register setup ready to go !...
You guys can see it live AT CLICK HERE ...
Everything is working, well at least here at the local machine...
There are 2 pages in there, Default.aspX, and About.aspx ... I want to allow ONLY logged in users to view those 2 pages... I tryed a few things, added my account to a role called ADMIN,
In the web.cong I changed Allow"*" to allow"ADMIN" ... still didn't work.. Also, I was trying to avoid using roles for now, and I was trying to find a way to do this for individual pages in the same directory as well... If possible with out touching the web.config file...
View 3 Replies
Oct 11, 2010
Is there any alternate of Marquee for moving the news in aspx page may i move the text without marquee tag?
View 4 Replies
