Placeholder Inside An UpdatePanel?
Nov 10, 2010
A little pseudo code to provide some background:I have an ASPX with a placeholder and a buttonWhen the button is clicked it adds a web user control (uc1) to my placeholderhe uc has a buttonWhen clicked it adds a different user controls (uc2) to the placeholderStepping through the code, if I look at the placeholder.controls.count before and after the button-click in #4 the count increases by one, as you would expect.The problem is that the uc2 added in #4 doesn't appear on the screen. So, I wrapped my placeholder in an UpdatePanel. I've never used one before. So, I could refresh the placeholder after the uc2 was added.relevant ASPX code
<ajaxToolkit:ToolkitScriptManager ID="ToolkitScriptManager1" runat="server></ajaxToolkit:ToolkitScriptManager>
<ajaxToolkit:TabContainer ID="tcNavigation" runat="server" ActiveTabIndex="0">
[code]...
View 1 Replies
Similar Messages:
Nov 8, 2010
TThis time I'm facing some unusual behavior with a web page that I'm developing. I have a table with several controls and gridviews and stuff. At some point of the table, i have to show some rows (they were hidden) when the users clicks a button. I was doing this with a PlaceHolder, but now i have to do it without the postback being displayed. I thought: "That should be easy, all i have to do is to put the PlaceHolder inside an UpdatePanel, and that's it" but no, no no nooo!! NOTHING IS THAT EASY!!! It actually works but it puts the hidden rows at the top of the page, not where they suppose to go!!My code is the following:
<asp:UpdatePanel runat="server" ID="uplAutoridadesAmbientales">
View 3 Replies
Jan 20, 2010
I need to access a dynamically created DropDownList from code-behind. This DDL is in a Placeholder, and the PlaceHolder is in a UpdatePanel.
I did the following to try and access the DDL:
[Code]....
But it returns null :( Why does that happen? How can a access the DDL?
View 4 Replies
Feb 1, 2011
GOAL: on a web page (vb.net) content in a placeholder will refresh with a different .ascx (user control) every 30 seconds (rotating 3 in total) and of course i dont want to refresh the whole page, just the placeholder.
I'm new at AJAX (that's my first problem - lol)
I set the timer up to call a function, but not sure how to go about refreshing the placeholder with a different ascx file. I'm sure i'll be using UpdatePanel to do this, but haven't been able to figure this out. Easy to replace a value in a label using AsyncPostBack trigger, but nothing on how to achieve this.
View 2 Replies
Oct 20, 2010
I have a HTML table that is built with a repeater. Sometimes the table has 5 rows, sometimes it has 8 rows.
It was easy to add the header rows.
<asp:PlaceHolder runat="server" ID="additionalHeaderColumns" />
In code behind I added controls (htmlheadercells) to the contentholder:
Dim tableHeaderCell As New TableHeaderCell()
tableHeaderCell.Text = "Test"
additionalHeaderColumns.Controls.Add(tableHeaderCell)
When I try to do the same in the databound event for each row I get an errormessage that tells that its not possible to put asp:PlaceHolder inside the row. it expects tablecells.
View 1 Replies
Nov 28, 2010
I'm working with a website written in aspx.net over vb.
I have a placeHolder, and I create a table of names inside this PlaceHolder, each name has an HtmlInputCheckBox next to it.
Im doing this in the aspx.vb file, when the page is uploading.
Then, when the user wants to send mail, he presses a button and than I need to access the checkboxes, and I'm having problems with this, the Sub doesn't know the checkBox object.
View 2 Replies
Oct 7, 2010
I have two update panels and one javascript control.
When the javascript button is clicked, it forces a partial postback on UpdatePanel2. UpdatePanel2 is populated with dynamically created buttons that have javascript effects (jquery) but when click can also induce a postback. My problem is that, when clicking on these dynamic buttons, the whole page does not do a partial post back but rather UpdatePanel2 itself does a partial postback and everything is gone.
However, what I want to do is be able to tie each of the dynamic buttons in UpdatePanel2 (After being dynamically created) and make them an asychnonous triggers to UpdatePanel1. So that when clicking on these dynamic buttons, ONLY UpdatePanel1 is doing a partial postback refresh. UpdatePanel2 stays put and remains the same.
View 1 Replies
Mar 26, 2010
i have Linkbutton inside updatePanel and when i click on it it returns following error
An extender can't be in a different UpdatePanel than the control it extends
View 1 Replies
Feb 14, 2011
I have a script inside an updatepanel. This script needs to be inside the updatepanel as it must be located in that spot.
Now when we click the "LinkButton" to update the updatepanel, the script will dissapear.
It seems that the script only is initiazed on the first Page_Load and Refresh of the page.
How can we keep it when pressing the "LinkButton"?
Complete code is below:
[Code]....
View 15 Replies
Mar 31, 2011
I've got a master page and a content page. How can I add controls to the master page's content placeholders programattically?
View 2 Replies
Jun 11, 2010
Is there possible to work update progress in the page inside content placeholder.
View 2 Replies
Aug 2, 2010
I am having a slight problem with adding text (output from a stored procedure) to a label control that is nested inside a contentplaceholder (ContentPlaceHolderProductsLeftCol). The page is also using master pages.
Below are excerts of the code - I think I would have to use teh findcontrol property however I am quite lost.
Label name is lastname and is located in ContentPlaceHolderProductsLeftCol
[Code]....
View 7 Replies
Sep 24, 2010
I have a gridview inside UpdatePanel.
Inside gridview there is a dropdownlist and a button on each row. On button click I am opening a panel through Modal popup extneder.
Inside that pop up there is again a dropdownlist. I am adding an item into this dropdownlist based on the selection from the dropdown inside gridview.
like ddl.items.insert(0,'xyz');
But first time this inserted item is not getting reflected in the dropdownlist. But after one postback this item is getting reflected.
View 2 Replies
Aug 16, 2010
I have an UpdatePanel with a GridView. This GridView has a template column that is a DropDownList. The problem is that the SelectedIndexChanged event does not fire for the DropDownList. Here is the code:
[Code]....
The codebehind:
[Code]....
View 2 Replies
Oct 4, 2010
I'm trying to add and edit an image which is located in a detailsview which is inside an UpdatePanel. After I read relevant topics in the forum I installed the Ajax Control Toolkit. Below is my source code. When I used it only for insert new image it worked great. The problem caused when I tried to implement it on the Edit mode, i.e. when I tried to edit the image and upload a different image. Unfortunately it didn't work as I hoped. Nothing happend and the image hasn't been changed. I also tried to change the IDs (AsyncFileUpload ID) to be the same in both places but it didn't work either.
The source code:
<asp:DetailsView ID="dvMovie" runat="server" Height="50px" Width="695px"
AutoGenerateRows="False" DataSourceID="sdsMovieById"
BorderColor="#E7E7FF" BorderStyle="None" BorderWidth="1px" [code].....
View 2 Replies
Feb 15, 2010
My application has a Parent master page, a child master page and an aspx page( inheriting the child master page)
> Parent master page has two content placeholders ( A and B)
>Child master page uses the content placeholder A and instills two more placeholders ( C and D)
>aspx page can now use C and D naturally
However i would like to know whether the aspx page can place contents inside the placeholder B( which was not used by child master page)
View 2 Replies
Feb 28, 2010
I've got a textbox being used to enter a password inside a wizard control. I'm trying to get a password strength meter working with it.
Unfortunately, the password box isn't visible until step 4 and this means that I can't register the event handler onload() and putting some JS next to the PW box to register the event handler doesn't seem to fire. I'm guessing this is due to the contents of the wizard being loaded through an AJAX postback.
[code]....
View 1 Replies
Feb 24, 2011
I have a masterpage and inside that masterage is a user control that has a toolbar with a save button. I then have an aspx page that inherits form t he master page. In that page I have and updatepanel. Is it possible to set the post back trigger to the Save button inside the usercontrol?
View 3 Replies
Jan 19, 2010
how to maintain state of placeholder. i have a placeholder in which i add many image controls dynamically but when my page get refresh all controls from placeholder gets removed from it. the enableViewstate of placeholder is set to true.
View 3 Replies
Mar 28, 2010
I have copy and paste this Alert Class:[URL] It works except with a button inside an update panel but it shows no error. The asp code inside is executed but nothing shows up on client side.
View 2 Replies
Apr 13, 2010
I'm creating an ASP.NET Control which has a property collection for Columns which the user can edit in the Property Collection Editor..
In most circumstances this works fine, the collection can be edited in the designer and the appropriate tags are added inside the control in the ASPX file.
It works fine when
My control is added to the form
[Code]....
My control is added inside an Update Panel
[Code]....
[Code]....
However, if My control is inside a Content Placeholder which is inside an Update Panel, it fails to work as it should. In this scenario, when the Columns collection is edited in the designer, if you then switch back to Source view, the Columns collection is emptied. I have to save the aspx page before switching back to Source view for the changes to be kept.
[Code]....
how to get around this problem? Is there something I may have missed?
Here's the code for the Control
[Code]....
View 2 Replies
Mar 22, 2011
I am using list view to display the the data but i am getting an error like An item placeholder must be specified on ListView 'ListView1'. Specify an item placeholder by setting a control's ID property to "itemPlaceholder". The item placeholder control must also specify runat="server.Even i have specified the itemplaceholder id but no use still same error.
[Code]....
View 1 Replies
Aug 4, 2010
[Code]....
I want to copy a placeholder to another placeholder, i know, i can't write somethin like this,
plh_footer = plh_header;
how can i do that?
View 6 Replies
Sep 24, 2010
I have two DropDownLists inside an UpdatePanel.
The values shown inside the second are dependent of the selectedValue on the first, so, I need AutoPostBack=true.
But, whenever the selected value in the first DropDownList is changed causes the UpdatePanel reload.
How can this be solved?
PS.: The UpdatePanel's UpdateMode property is set to Conditional.
View 1 Replies
Jun 15, 2010
So i use PopupControlExtender (to edit some of the fields) inside ListViewControl which itself is embeded inside an UpdatePanel.
The problem is as follows whenever you cause partail postback the popup panels are created client side outside the updatepanel. And you get more clientside controls with the same clientside ID. When you postback with popup panel the server side control eg. Texbox has Text = clientsidecontrol1.text, clientsidecontrol2.text, clientsidecontrol.text3
Is there a way to prevent this.
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="Test.aspx.cs" Inherits="Secure_Test" %>
<%@ Register assembly="AjaxControlToolkit" namespace="AjaxControlToolkit" tagprefix="cc1" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
[Code]....
View 1 Replies