I have copy and paste this Alert Class:[URL] It works except with a button inside an update panel but it shows no error. The asp code inside is executed but nothing shows up on client side.
View 2 RepliesI have two update panels and one javascript control.
When the javascript button is clicked, it forces a partial postback on UpdatePanel2. UpdatePanel2 is populated with dynamically created buttons that have javascript effects (jquery) but when click can also induce a postback. My problem is that, when clicking on these dynamic buttons, the whole page does not do a partial post back but rather UpdatePanel2 itself does a partial postback and everything is gone.
However, what I want to do is be able to tie each of the dynamic buttons in UpdatePanel2 (After being dynamically created) and make them an asychnonous triggers to UpdatePanel1. So that when clicking on these dynamic buttons, ONLY UpdatePanel1 is doing a partial postback refresh. UpdatePanel2 stays put and remains the same.
i have Linkbutton inside updatePanel and when i click on it it returns following error
An extender can't be in a different UpdatePanel than the control it extends
I have a script inside an updatepanel. This script needs to be inside the updatepanel as it must be located in that spot.
Now when we click the "LinkButton" to update the updatepanel, the script will dissapear.
It seems that the script only is initiazed on the first Page_Load and Refresh of the page.
How can we keep it when pressing the "LinkButton"?
Complete code is below:
[Code]....
have a Visual Studio 2010 project which targets v4.0 of the .NET framework.In the project, I have a page with an ASP.NET UpdatePanel - which works perfectly within VS2010's development server.However, when deployed to an IIS 6 server, the controls in the UpdatePanel cause a full-page postback - not an async postback.The site has its own application pool.I've tried visiting the ScriptResource.axd URLs which are present in the rendered page and they all produce valid looking JavaScript files.I can't see any Javascript or other errors.
View 1 RepliesI have a gridview inside UpdatePanel.
Inside gridview there is a dropdownlist and a button on each row. On button click I am opening a panel through Modal popup extneder.
Inside that pop up there is again a dropdownlist. I am adding an item into this dropdownlist based on the selection from the dropdown inside gridview.
like ddl.items.insert(0,'xyz');
But first time this inserted item is not getting reflected in the dropdownlist. But after one postback this item is getting reflected.
I have an UpdatePanel with a GridView. This GridView has a template column that is a DropDownList. The problem is that the SelectedIndexChanged event does not fire for the DropDownList. Here is the code:
[Code]....
The codebehind:
[Code]....
I'm trying to add and edit an image which is located in a detailsview which is inside an UpdatePanel. After I read relevant topics in the forum I installed the Ajax Control Toolkit. Below is my source code. When I used it only for insert new image it worked great. The problem caused when I tried to implement it on the Edit mode, i.e. when I tried to edit the image and upload a different image. Unfortunately it didn't work as I hoped. Nothing happend and the image hasn't been changed. I also tried to change the IDs (AsyncFileUpload ID) to be the same in both places but it didn't work either.
The source code:
<asp:DetailsView ID="dvMovie" runat="server" Height="50px" Width="695px"
AutoGenerateRows="False" DataSourceID="sdsMovieById"
BorderColor="#E7E7FF" BorderStyle="None" BorderWidth="1px" [code].....
I am currently using a asp.net 2.0 with visual studio 2005.
I am trying to build a web application using ajax.
but when I drag the ajax updatepanel on asp.net page it is not resizable,so how should i put other controls on it?
i am using a TabContainer and at each TabPanel i have embed an UpdatePanel in order to update each tab alone.
this is my code:
[Code]....
the problem is that it makes several seconds to update each tab (the same time for every tab) and i asume that this is happening because it updates all the TabContainer and not the selected Tab.
I've got a textbox being used to enter a password inside a wizard control. I'm trying to get a password strength meter working with it.
Unfortunately, the password box isn't visible until step 4 and this means that I can't register the event handler onload() and putting some JS next to the PW box to register the event handler doesn't seem to fire. I'm guessing this is due to the contents of the wizard being loaded through an AJAX postback.
[code]....
I have a masterpage and inside that masterage is a user control that has a toolbar with a save button. I then have an aspx page that inherits form t he master page. In that page I have and updatepanel. Is it possible to set the post back trigger to the Save button inside the usercontrol?
View 3 RepliesI am trying to trying to setup an updatepanel to update every X seconds, the problem is I don't want the control to actually refresh unless there is new data. So I currently have a child updatepanel in a parent UpdatePanel, the child updatepanel gets refreshed by a timer. But I can't seem to find a way to trigger the parent panel to update. Again, only when certain conditions(data changed) are met.
Sample Code:
[code]....
I have two updatepanels on my site (upanProfileSearch and upanMemberList). When I hit the button in the upanProfileSearch it should bind the Data Items in the gridview in upanMemberList and here make a RowFilter on the text in upanProfileSearch. When I make a run to curser, I can see, it happens. It makes a RowFilter. but it doesn't update the gridview. Can anyone tell me why it doesn't update? I have UpdateMode="Always" and RenderMode="inline" on both UpdatePanels.
[Code]....
[Code]....
I have a dropdownlist, that causes a postback. On the SelectedIndexChanged event, is it possible to force a placeholder that is within a different UpdatePanel to change it's visibility?
For example, when the SelectedItem.Value of DropDownList1 is "1" then show Placeholder1, otherwise hide it.
What I am most interested in is how to configure the UpdatePanels to allow this.
How to implement updatepanel functionality without updatepanel?
I am tring to use XMLHttpRequest but I am getting problem while redering a usercontrol containing postback controls in response of an Ajax request.
Here is my code
[Code]....
[Code]....
[Code]....
I have a web user control with one updatepanel (pnlUpdate_2), some controls and one apply button. I display the web user control as a modalpopup in my default page. In my default page i have an updatepanel (pnlUpdate_1) with a gridview and I modify that gridview with the apply button of the web user control. The web user control is for made a custom search of the gridview data. I have a problem with both updatepanels. If I set the updatemode as always in one of them (pnlUpdate_1) and the other as conditional (pnlUpdate_2), the pnlUpdate_1 make a postback in the pnlUpdate_2; I'm not an expert on this but I think that's why the pnlUpdate_2 disappear and reappear after postback of some controls in that updatepanel (not the apply button, it close the modal after postback). I try all the combinations and the problem persists. So I put both updatepanels as conditional and in some way it works; now the problem is that when I click the apply button in pnlUpdate_2 to modify the gridview in pnlUpdate_1 the pnlUpdate_1 not made the postback I get the pnlUpdate_2 postback when I use some control inside the pnlUpdate_1.
How can I postback the pnlUpdate1 from pnlUpdate_2 with the apply button?
I have two DropDownLists inside an UpdatePanel.
The values shown inside the second are dependent of the selectedValue on the first, so, I need AutoPostBack=true.
But, whenever the selected value in the first DropDownList is changed causes the UpdatePanel reload.
How can this be solved?
PS.: The UpdatePanel's UpdateMode property is set to Conditional.
So i use PopupControlExtender (to edit some of the fields) inside ListViewControl which itself is embeded inside an UpdatePanel.
The problem is as follows whenever you cause partail postback the popup panels are created client side outside the updatepanel. And you get more clientside controls with the same clientside ID. When you postback with popup panel the server side control eg. Texbox has Text = clientsidecontrol1.text, clientsidecontrol2.text, clientsidecontrol.text3
Is there a way to prevent this.
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="Test.aspx.cs" Inherits="Secure_Test" %>
<%@ Register assembly="AjaxControlToolkit" namespace="AjaxControlToolkit" tagprefix="cc1" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
[Code]....
I have a ScriptControl (requires ScriptManager) with JavaScript to handle client-side interactions and ICallbackEventHandler to communicate back and forth. Everything works perfectly with one or multiple instances of the control on a page. I placed the control inside a GridView with sorting and it still works. However, I place the GridView in an UpdatePanel and now whenever I sort I get the following error for each instance:
Sys.InvalidOperationException: Two components with the same id 'GridView_ctl02_MyControl' can't be added to the application.
Can someone point me in the right direction on how to solve this? I am assuming ScriptManager is not disposing of the old Sys.UI.Control objects before trying to $create() the new ones with the same ID. I thought the UpdatePanel/ScriptManager combination would automatically take care of disposing objects that would be replaced?
A little pseudo code to provide some background:I have an ASPX with a placeholder and a buttonWhen the button is clicked it adds a web user control (uc1) to my placeholderhe uc has a buttonWhen clicked it adds a different user controls (uc2) to the placeholderStepping through the code, if I look at the placeholder.controls.count before and after the button-click in #4 the count increases by one, as you would expect.The problem is that the uc2 added in #4 doesn't appear on the screen. So, I wrapped my placeholder in an UpdatePanel. I've never used one before. So, I could refresh the placeholder after the uc2 was added.relevant ASPX code
<ajaxToolkit:ToolkitScriptManager ID="ToolkitScriptManager1" runat="server></ajaxToolkit:ToolkitScriptManager>
<ajaxToolkit:TabContainer ID="tcNavigation" runat="server" ActiveTabIndex="0">
[code]...
In my UserControl, Im trying to update a updatepanel that is inside a repeater like this:
HTML-Markup
<asp:UpdatePanel ID="updDocumentQuickView" runat="server" UpdateMode="Conditional">
<ContentTemplate>
<asp:Repeater ID="repFolders" runat="server"
[code]...
The end result I get is that updDocumentQuickView is the UpdatePanel that gets updated, and not updFiles. If i wrap an UpdatePanel around lnkFolder, then that UpdatePanel gets updated, with the same C# code. Ive checked what kind of data that are sent back with fiddler, and the wrong UpdatePanel is sent. Im getting the correct RepeaterItem, and both repFiles and updFiles are found. What do I miss to get the right UpdatePanel to get updated?
UPDATE
Hawxby solution solved the problem with updDocumentQuickView getting updated, thanks for that. But im still having problems with updFiles sending nothing back. Some further testing, with putting literals inside updFiles and working, tells me that theres something with repFiles that isnt returned. repFiles does have data that is bounded.
FINAL SOLUTION
repFiles.Visible were set to false in repFolders_OnItemDataBound, no wonder it didnt show.
I'm doing a website with Ajax and Framework3.5.
I have a update panel inside a modalpoupextendar which is in another update panel.
When user need to click the button in the parent update panel the modal popup will appear,
then in the popup if user click a button there I Need to show some text in a user control which placed in the panel.
See the html tag and tel me any solution. Its not working for the first click its working in the second click only.
Code:
<asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolder1" Runat="Server">
<asp:UpdatePanel ID="UpdatePanel1" runat="server" UpdateMode="Conditional" ChildrenAsTriggers="False">
<ContentTemplate>
<asp:Button ID="btnHidden" runat="server" Text="Button" />
<cc1:ModalPopupExtender ID="ModalPopupExtender2" runat="server" BackgroundCssClass="modalBackground"
BehaviorID="popup" DropShadow="true" PopupControlID="pnlUpdate" CancelControlID="btnNo"
TargetControlID="btnHidden">
</cc1:ModalPopupExtender>
<asp:Panel ID="pnlUpdate" runat="server" CssClass="modalPopup" >
<div>
<asp:UpdatePanel ID="UpdatePanel2" runat="server" UpdateMode="Always">
<ContentTemplate>
<div>
<uc1:Feedback ID="Feedback2" runat="server" />
</ContentTemplate>
<Triggers>
<asp:AsyncPostBackTrigger controlid="btnTest" eventname="Click" />
</Triggers>
</asp:UpdatePanel>
<asp:Button ID="btnTest" runat="server" Text="Test" onclick="btnTest_Click" />
<asp:Button ID="btnNo" runat="server" Text="Cancel" /></div>
</div>
</asp:Panel>
</ContentTemplate>
</asp:UpdatePanel>
</asp:Content>
I am using Asp.Net 3.5. I am having two problems in dropdown inside the update panel. I have two drop down list. First dropdown i loaded the data from db. Its working fine. Once i changed the data using SelectedIndexChange event it's firing first time(i put AutoPostback="true") if i click multiple times for multiple data it's not fired. If changed the value i bind the data to another dropdown list. But it is not binding. My control is inside the update panel. What is the problem? i came across multiple site and try it.But no use? Its very urgent. I put the code here.
Code:
[code]....
I am having a custom ASPX page with following structure. Its having 2 update panel and I have a ImageButton outside them. The two UpdatPanel are triggered by this ImageButton.The Problem is whenever user clicks the Imagebutton, the image in the ImageButton is getting reloaded...it disappears and the reappears. I am not able to figure out why the postback is happening when the imagebutton is place outside UpdatePanel. Is it because I am using this Imagebutton for triggering AsyncPostBack in UpdatePanel?
[Code]....