Prevent ID Autogeneration On Copy - Paste In Visual Studio 2008 Web Form
Mar 4, 2010
If I have the following in an ASP.NET Web Form:
<asp:TextBox runat="server" ID="tbxUser"/>
and I copy and paste that line in the same page, I usually get the following:
<asp:TextBox runat="server" ID="TextBox1"/>
Obviously, nobody is going to name their controls in that way (if you don't want to name a textbox, simply don't asign an ID to it), and it's not nice having to change the ids of pasted controls. The same happens if I copy a control without an explicit ID, VS simply generates one for me. Is there any way of preventing VS from autogenerating IDs when I copy-paste ASP.NET code?
View 1 Replies
Similar Messages:
Feb 16, 2010
I have a site that was created with VWD2005. I tried to open the solution with VS 2008. This prompted me to convert it which I did. Now when I look at the project in the Solution Explorer in VS 2008, I see all of the files but they are now with in a folder named "2" that's within a folder named "back up". I also see another folder with in the solution that's named _UpgradeReport_Files.
The files for my project that are with in the folder "2" that is with in the folder "back up" are actually in the back up folder for my project in the Visual Studio 2005 folder with in My Documents. I assume this is because I chose the "create back" up option when doing the conversion. I don't understand why these files and this project aren't in the project directory with in the VS2008 folder with in My Documents.
I want all of my files for this project to be in the projects folder with in the Visual Studio 2008 folder in My documents, the same as if I had created this project in Visual Studio 2008 originally. But the conversion doesn't seem to have done this. Instead I seem to be using a solution/project that references the original files with in the back up folder as mentioned above.
Can I just create a new project in VS 2008 and paste these files into it? Will this work? I'm not sure if it will because the original one was created in VWD 2005 which I think uses the .net framework 2.0. My Visual Studio 2008 uses version 3.5 Sp1 of the .NET framework.
View 1 Replies
Oct 8, 2010
It happens frequently when I try to copy & paste code inside VS 2010 with following message:
insufficient available memory to meet the expected demands of an operation at this time, possibly due to virtual address space fragmentation. Please try later.
and I check the memory usage with taskmanager on my computer. It is fine.
In order fix it, I need to close VS 2010 and restart again.
View 1 Replies
Jan 9, 2010
all of a sudden i cant copy or paste code snippets in my code. what can it be? neither i can copy the folder from the wwwroot folder.
View 1 Replies
May 4, 2010
When writing inline code in an .aspx file and some lines down closing a statement with <% } %>, Visual Studio tries to be nice but messes it up by rewriting it all. Is there any way of turning this rewriting off, but only for inline code?
View 2 Replies
Jan 6, 2010
Is there any tool for Visual Studio 2008 which can reformat ASPX code to make it more presentable (eg insert line breaks, format the lines so they wrap when necessary, etc)?
View 5 Replies
Aug 14, 2010
is it possible to convert whole visual studio 2008 web site project to visual studio 2010 web site project
my current project references
i have a very annoying iis problem
iis server stops working until app pool is recycled
i am hoping that new visual studio (net framework 4.0) may solve this very annoying unsolveable problem
View 2 Replies
Oct 31, 2010
I am getting the following error when I try to establish ftp remote connection using the 'copy web site' feature on visual studio 2005.
unable to open the web 'ftp://209.*.*.*/httpdocs'. The computer is disconnected from the network.
Why can't I connect to the remote site on visual studio 2005? I can do the same thing on Dreamweaver with no problem. I can ping the IP successfully. I can open the ftp URL on a web browser with no problem.
View 1 Replies
May 21, 2010
Anyone know if I can maintain a VS 2008 (.net 3.5) project by using the VS 2010 IDE ?
View 1 Replies
Sep 11, 2010
i have created a login.aspx file in visual web developer .now i want to connect the username and password details to SQL database
View 1 Replies
Apr 3, 2011
I want to have 4 links in the sidebar of master page which every other form (content page) in my web application inherits.
<table>
<tr>
<td width= "150px">
<asp:ContentPlaceHolder ID="ContentPlaceHolder1" runat="server">
<asp:Menu runat="server" ID="MainMenu1" CssClass="MasterContent" StaticSubMenuIndent="30px">
<Items>
<asp:MenuItem Text="My Software" NavigateUrl="~/MySoftware.aspx"></asp:MenuItem>
<asp:MenuItem Text="Check Out" NavigateUrl="~/CheckOut.aspx"></asp:MenuItem>
<asp:MenuItem Text="View Shopping Cart" NavigateUrl="~/ShoppingCart.aspx"></asp:MenuItem>
<asp:MenuItem Text="Continue Shopping" NavigateUrl="~/Start.aspx"></asp:MenuItem>
</Items>
</asp:Menu>
</asp:ContentPlaceHolder>
</td>
<td width="900px">
<asp:ContentPlaceHolder ID="ContentPlaceHolder2" runat="server">
</asp:ContentPlaceHolder>
</td>
</tr>
</table>
This is the content in the master page as you can see there are 4 menu items i tried to form as sidebar and i tried to inherit in home.aspx(one of the content pages) as follows:
<%@ Page Language="C#" AutoEventWireup="true" CodeBehind="Start.aspx.cs" Inherits="WebStore._Start"
MasterPageFile="~/Webstore.Master" %>
<asp:Content ID="StartSideBar" runat="server" ContentPlaceHolderID="ContentPlaceHolder1">
But unfortunately the sidebar is not at all getting displayed. I know i'm doing fundamentally wrong some where. My intention is to have web pages to have sidebar like this. It is a screenshot of my intended page.
View 1 Replies
Jan 20, 2010
can Visual Studio 2008 be All-In-One tool to integrate source code continuously from team members, build, unit test?
Having used Visual Studio Team Edition 2005, unit testing each method within VS itself. I strongly believe that it is feasible to add-on tools. Example ankhsvn tool to use SVN from Visual studio [URL]
In my investigating i have come across number of tools(shown below) to use with Visual Studio 2008 professional
Development tool:- Visual Studio 2008 professional using Subversion as source control tool. Continuous Integration:- Hudson or Cruise control Build tool:- NAnt Testing:- NUnit, Selinium As Visual Studio 2008 can be used for unit testing I think NUnit is out of consideration.
In the same way i would like to have any other tools/add-ons to Visual studio to implement continuous integration, building and unit testing. This process should be automated such a way source code between team members is continuously integrated, built and unit testing is done as configured.
Objective is to use few number of tools as add-on to Visual Studio or achieve most from Visual studio itself (example unit testing). Visual Studio should be all in one tool.
I am aware that Team Foundation Server best suits my requirement, but it is out of scope due to its cost.
View 3 Replies
Aug 8, 2010
I downloaded Visual Studio 2008 Professional Edition via torrent.
It was working fine for months & i formatted my comp & when i tried to reinstall it is not getting installed !
It shows the following error !
and the error log file seems to be like this...
BUT.,
I'm able to use Visual Studio & i'm able to work in it....
I'm re-installing since 2 days for more than 4 times...
View 1 Replies
Mar 1, 2010
I have VS 2008 Professional Edition.....I want to test a function like this:
public int getIdByName(string name)
{
var item=from x in DATAB
where x.name=name
select x.id;
.
.
return idValue;
}
now I test end I have:
[TestMethod()]
public getIdByNameTest()
{
string name="Bob"
int expected = 1;
int actual;
actual = ClassGET.getIdByName(name);
Assert.AreEqual(expected, actual);
Assert.Inconclusive("Verify the correctness of this test method.");
}
The error in "test run" is:
Failed ......[Class]....... Test method threw exception: System.ArgumentException: The specified named connection is either not found in the configuration that is not for use with the EntityClient provider or thought is invalid
View 7 Replies
May 28, 2010
How can I ensure that web application converted from 2003 visual studio to 2008 visual studio
to have two files as it is when create a web file in visual studio 2008.The web application is in Chsarp. I have converted these filesfrom 2003 to 2008 but they still have three files each.
View 4 Replies
Jul 26, 2010
I just created a table, after I copy a text from somewhere and paste it into the cell. The width of the cell is enlarged.
View 2 Replies
Aug 11, 2010
I am trying to convert guidance package of vs2008 to vs2010,
followed instructions as per this link {http://msdn.microsoft.com/en-us/library/ff697211.aspx}
and getting error as
Error 1 The "GenerateMenuResource" task failed unexpectedly....
View 1 Replies
Jan 18, 2010
i am downloading thr Visual Stuio 2008 Professional Version from microsoft website which is a 3.1GB software and a trial version which expired after 90 days, i want to know this trail version includes everything ?
i am confused by reading this on the VS2008 download page :
"Instructions
Visual Studio 2008 Professional Edition is a comprehensive set of tools that accelerates the process of turning the developer's vision into reality. Visual Studio 2008 Professional Edition was engineered to support development projects that target the Web (including ASP.NET AJAX), Windows Vista, Windows Server 2008, the 2007 Microsoft Office system, SQL Server 2008, and Windows Mobile devices.
This Trial Edition is fully functional but will expire after 90 days. This trial software is not supported by Customer Services and Support (CSS)"
[URL]
View 3 Replies
Oct 21, 2010
I would like to be able to copy one row and five columns from an Excel spreadsheet to a table like structure on a ASP.NET web form. The idea is keeping the data in the exact row and column from Excel to the table like control on the ASP.NET web-form. Then I want to be able to save to the contents of the ASP.NET control to a database by a buttoon command click. What ASP.NET control would allow me to do this? Gridviews and datagrids don't seem to allow me to do this.
View 1 Replies
Feb 9, 2011
In my Asp.Net project I need to Copy and Paste Text to DropDownList.
How can I do it.
View 3 Replies
Jun 30, 2010
i have developed simple login form as my web application. I wanted to connect it with database to add some more features. However, my VS 2008 was unable to connect with SQL Server 2008 on my laptop, I thought, I should copy and paste my entire web application folder into my web space provided by university. I have done that through ftp. However, when I have tried to debug my application (through remote desktop connection on my university server) I got some weired error.
Furthermore, when I have tried to debug my application on my laptop, it gave me an error that "Web.config file has been renamed, changed or deleted........."
So, my question is, "Is it possible to copy and paste your project simply like you do with your other files (songs, movies or photos etc...) and can debug (source as well as destination) without doing any further editing or chages?"........If no, what are the other alternatives?......
View 1 Replies
Oct 21, 2010
What control would allow me to paste a single row (5 columns) from Excel and allow me to copy it to an Excel type of row (5 columns) in asp.net form? Then I want to be able to save the contents by a click of a command button to database.
View 4 Replies
Dec 31, 2010
How do you copy (rightclick) some columns from a gridview (asp.net) and paste it in excel? When I try I get one line with all the data pasted in excel, and it should be in the same columns and rows as the gridview.
View 3 Replies
Sep 14, 2010
I'm running into a really weird issue: when a user copies text from another file and pastes into an ASP textbox, question marks occasionally appear. For example, copying text from one file ("P/U FILE5") pastes correctly into the ASP textbox, displaying as "P/U FILE5"
However, in the database, the text is stored as "P?/?U FILE?5"
So by way of checking and converting the textbox string to a byte array, I see byte values like this: "80 63 47 63 85 70 73 76 69 83 63 53" which means that when I actually look at the VALUE of the textbox string, it's actually sticking question marks in there. But they don't appear anywhere in the textbox!
View 4 Replies
Jan 7, 2010
My website application is developed with Visual Studio 2008. The programming is written and tested with a project saved on my local hard drive. Afterwards the program is transferred to my http site with the Copy Web Site function of VS 2008. Previously Visual Studio always knew the location of the remote web site. It always started the Copy Web Site function with my source site as the http site and the remote site as the site on my hard drive.
Recently, Visual Studio demands that I enter the remote site. Of course, I can do this and cause the Copy Web Site function to work. However, when VS knew the remote web site, it could easily notify me as to what changes had occurred on the Remote site since the last Copy Web site function. This helped me in determining which files needed to be copied to the http Source web site. How can I permanently link my hard drive file location as the source site in the Copy Web site function of Visual Studio 2008?
View 2 Replies