I have the following code in a class in which I call from different pages, I wanted to know where this info is being stored at as I can see it from different pages.
[Code]....
Also, is this saved on the browser session? IIS? will whatever being set from 1 user be affected by every other user on the site?
let me know what does these access modifiers means.private shared vs public shared vs protected shared
View 5 RepliesI can access a module from code behind but not from the aspx page in inline VB code <% ... %>.
I know its got to be something simple but I can't seem to find the answer anywhere.
We have an application that has quite an extensive APP_Code directory (about 150 functions). The functions are split across multiple files and then classes and namespaces.
On numerous pages we have to create numerous instances of the classes to be able to access the functionality, which can get very repetitive and means we're repeating code on every page declaring the instance etc.
As far as I can tell, a way to navigate this issue, is to make the functions Public Shared (as opposed to just Public functions).
For reasons I would rather not discuss, I need to create a custom authentication system for my app. I was just reviewing the system and am having some doubts if my solution is thread safe. My goal was to create a solution that would allow my app to authenticate a user one time and that users authentication info would be shared by all master pages, pages, classes, user controls, etc that are used. (But not share the same info between users) Here is my setup: PageHttpModule.cs - this is added to the web.config as a httpModule.
public class PageHttpModule : IHttpModule
{
public void Init(HttpApplication app)
{
app.AuthenticateRequest += new EventHandler(OnAuthenticateRequest);
}
public void OnAuthenticateRequest(Object s, EventArgs e)
{
CurrentUser.Initialize();
}
public void Dispose() { }
}
CurrentUser.cs
public static class CurrentUser
{
public static bool IsAuthenticated { get; private set; }
public static string Email {get; set;}
public static string RealName {get; set;
public static string UserId {get; set;}
public static void Initialize()
{
CurrentUser.AuthenticateUser();
}
Note: this is a scaled down version of my authentication code.
public static void AuthenticateUser()
{
UserAuthentication user = new UserAuthentication();
user.AuthenticateUser();
if (user.IsAuthenticated)
{
CurrentUser.IsAuthenticated = true;
CurrentUser.UserId = user.UserId;
CurrentUser.Email = user.Email;
CurrentUser.RealName = user.RealName;
}
}
}
UserAuthentication.cs
public class UserAuthentication
{
public string Email { get; set; }
public string RealName { get; set; }
public string UserId { get; set; }
public bool IsAuthenticated { get; private set; }
public UserAuthentication()
{
IsAuthenticated = false;
Email = String.Empty;
RealName = String.Empty;
UserId = String.Empty;
}
public void AuthenticateUser()
{
//do some logic here.. if the user is ok then
IsAuthenticated = true
Email = address from db
UserId = userid from db;
Realname = name from db;
}
}
I have tested between 3 different browsers and it seems to work fine, but I am still learning and don't want to make a huge mistake. If my logic is totally wrong, then how should I do it so I dont have to put user lookups on every page directly?
I am using the following code for slide show of AjaxToolkit. It works. But I wanna get the label1.text as picture name But I cannot do it in public shared function ! How can I do that !
[Code]....
I have made public readonly shared properties in my class.
I want to acces a property's value in .aspx page. As i think that is possible through scriptlet like this
<%= ClassName.Propertyname %>
But its not working .Where i am wrong ?
I have two pages page1.aspx and page2.aspx, both have code behind with partial classes. How do i access public property message on page1.aspx from page2.aspx ?
public string message { get; set; }
I have a gridview that is dynamically created and have finished all but one problem - I need for my code that is within a Public Shared Function to access a textbox string - In the below I need myinput to return the string so that my query's can use the variable - the below shows: Cannot refer to an instance member of a class from within a shared method or shared member initializer without an explicit instance of the class.
If I remove the "Shared" the error goes away however it crashes other parts. (if I hard code the text then all works as expected)
[Code]....
I have a very simple user control in my web site project which has public property declarations as following
[code].....
When i drag the ascx file to one of my aspx page and when i go to code behind of aspx page i can access the controls properties through intelisense, but when i run the project through visual studio i get error "The name 'uctTest1' does not exist in the current context?
This is the line where Error shows when i run the project uctTest.StartDate = DateTime.Now;
aspx page markup :
[code]....
Names of the private properties of a public class?
I have the following class
[Code]....
I have searched high and low (and very possibly could have missed it), but in my years of programming, I have always come across one practice that seemed to be the standard in OOP, which is to use private properties in an object with public methods to manipulate the data.
However, the more I delve into ASP.NET (specifically with MVC), the more public properties I see inside of classes (specifically models) such as the ones shown at Scottgu's blog discussing the Entity Framework.
Does it have something to do with the way that LINQ populates a class?
I have like 10 private members in my class, and I was hoping vs.net could create public properties from them but can't seem to find that option in VS.NET 2008.
Is there a feature for this?
Why i can't access MasterPage's public property (MessagePlaceholder) from other Class (Errors) ?Error compiler gives me is "Error 1 The type or namespace name 'MyMasterPage' could not be found (are you missing a using directive or an assembly reference?)"my master page code behind
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
public partial class MyMasterPage : System.Web.UI.MasterPage
{
public string MessagePlaceholder
[code]...
i have websrvice class in this i declared a webmethod and a public property my problem is i want to acess service class public property in my asp.net web application after creating proxy object.
service class:
[Code]....
Here's the scenario: A class based on System.Web.UI.Page has been created. A number of content pages derive from this class. All of these content pages use the same master page. The content pages define controls which need to access things on the master page (in code-behind). This is fine - no problem. In particular, each content page has its own data grid. The grid on each page has the same name, so that common code can reference it. In fact, some event handling for the grids on each content page is identical, so would like to factor that code to the base class. Interestingly, I can actually define the event handler entirely in the base class, with no stub in the content class at all, because the wire-up of event handlers uses the event-handler name defined in the grid, and that name happens to be found in the inherited base class. All good and dandy... very cool in fact. The problem comes when the code in the base class needs to access any of the common elements from the content page's master. Remember, the master is the same, and I know the type of the master. I would like to do something like this in the base-class code:
((myMasterType)this.Master).PropertyofMaster=xxx;
The problem is, that myMasterType - the type of the master page the content pages are using - is not available at compile time, at least not from a class definition for a base page. I've found articles that claim that the class name of the master is available - and it is, but not from a separate class. I CAN see it and compile with the master's class name from, for example, the code behind of the various content pages. But the actually class simply isn't available, it seems, from a pure class (the base page class). Judging from other times this question has been asked, here are common misunderstandings offered as solutions: 1. Use a page directive to declare the master type. This is not even vaguely a part of the problem, as the issue is not code in the content page, but in a separate base class which content pages inherit from. That base class is a pure class -- no .ASPX file at all. 2. Pass a reference to the master object from the content page to the base class. This can be done, but is pointless, because I can already get it, using "this.Master" from the base class! But because the type of the master is not available at compile time from the base class, it can't be passed from the content page either - unless it is passed with type MasterPage, thus losing all the properties/methods publically defined in the specific master page class. 3. Move the base page class out of the App_Code folder because the app_code folder is compiled before the other classes, and thus before the master page class. Doesn't work -- put the master page class file right in the same folder with these content pages and their master page, and the master page class is still not available at compile time from within the class. Re-summarized: Base page inherited by content pages. Content pages all use a common master page. Want to access the public properties of that master page from the base page, at runtime. Barrier is that I can find no way from within the base class to cast the master page object to the actual master page subclass being used.
I'm embarrassed to ask this here because it's clearly been duplicated several times already on StackOverflow. I've read a lot of stuff including:
[URL]
I think I've done exactly what those article say, but it's not working for me.
Here's the top of my master page, named "MasterNoNews.master":
[code]....
In the first case, VS is telling me System.Web.Ui.MasterPage does not contain a definition for urrentUser. In the second case, VS says the type or namespace 'MasterNoNews' could not be found.
My UI layer calls my business layer which populates a DTO. I need to display properties from the DTO on my ASPX page. Should I create public variables on the code behind page for each of the DTO properties and reference like <%=PublicPropertyName%> OR is it ok to set the DTO instance to public and reference the properties directly like <%=dtoInstance.propertyName%>
Additionally, would it be better if I just created Literal and Label controls for every item on the ASPX page and just populate them from the code behind only?
I'm working on a web application that stores some Office document (and any other kind of doc) on a remote shared area. I need to allow user to view the files available on shared area using my web application, how can I do that? Some years ago I solved this issue with Java / JSP opening into an output streaming the file, how can I do the same with ASP.NET and VB.NET? there is another way to solve my issue?
This is how I organized my application:
C:Webapp -> Webapplication
emoteserversharedfolder -> shared area
The owner of IIS process is the only user that can write / read the shared area.
How do declare a public variable .aspx web page that can be used in all the pages within my web application? And/or create a Public Sub?
View 3 RepliesI have a question about C Sharp ASP.NET:Is there a difference (in code speed, resources) between:public static variable declared in public static class MyGlobals in a 'Code File' template;and the variable declared in a normal 'Class File' template;I use this variable in 2 different Class Files and also in _Default Page codebehind cs file.In fact in my case I need about 20 global variables of type List<string>.
View 9 RepliesI have a new VS2010 .NET 4.0 Web project and the Properties Folder has gone wierd on me. It has lost teh "Open" under the right click. There is no way to get a Settings file created now.
I am unable to get to the Settings grid and no Settings file is created. I tried the help and it has the normal trip of select Properties, Open (right click), Settings Tab, etc. etc.
I want to call a non shared function in a shared function in which i am having a textbox control instance. Its giving no error but when i call this shared function from client callback it gives me no response
Any Idea except removing shared from the function.
Here is my code :
<WebMethod()> _
Public Shared Function myF() As String
Dim pg As New _Default
Return "{'Hello':'" & pg.setText & "'}"
End Function
Public Function setText() As String
Dim pg As New _Default
pg.TextBox1.Text = "This is a test"
Return pg.TextBox1.Text
End Function
I am relatively new to ASP.NET. I am just wondering if there is way to read values from properties file (similar to rading a properties file from JSP or java).
For example if a property file has something similar to this:
[Code]....
I would like to read all the values for username_list (comma seperated) and also the value of is_valid.
i want data to drop down list using stored procedure .
However im not able to do that.