I'm already redirecting an old domain via a 301 redirect but I've noticed that I'm getting lots of requests for certain files and pages from the old site. How can I redirect these requests so that it just loads the new site? I'd like to do this for specific files only.
Edit: The website is on shared hosting, but I can edit the web.config file of course.
What's the simplest and most effective way to selectively redirect HTTP requests to your ASP.NET page to its HTTPS equivalent? For example, if my page site URL is [URL], I want to redirect some (or all) page requests to [URL] What's the easiest way to do that?
View 2 RepliesI have two domains for example [URL] and [URL] which both point to the same website app. In this app I have an HTTP module which checks if the session of the user is still active and if so checks if the user is a male or female. I want to check from which domain the user entered the website. If the user is a male but entered (came from) [URL]the user must be redirected to [URL]. The opposite must be done in case of a women. Other scenario's are:
a male user enters [URL]it should be redirected to [URL]
a male user enters [URL]it should be redirected to [URL]
I am using ASP.NET 3.5 on a IIS 7.0 box.
I have two domains: www.MySite.ORG and www.MySite.COM. In both, there are web applications done in asp.net 4. I would like to modify the web.config of www.MySite.COM so that all the visitors going here will automatically be redirected to www.MySite.ORG. I thought I could do this through the control panel in the webhost, but it seems it cannot be done.
View 4 Repliesdefaulttur.aspx (if user entered www.mysite.com, default.aspx page will redirect to the defaulttur.aspx)
View 3 RepliesI have a website say [URL] and recently found that someone has a domain name say [URL] forwarding or redirecting to my website [URL] and if you type [URL] it shows my actual website!! How can I stop these kinds of activities using some sort of script
View 5 RepliesI need to validate a coming request where form is being submitted from the another domain to my website,
Like
[URL]
Remote site:
[URL]
Now this submit.aspx form get submitted to my website,
how to validate on [URL] that request is coming from [URL] only.
I have one page from which i have to redirect to a page which is in some other application or can say in other domain.I want waiting screen till the page is loaded.I want to do it by jquery.
View 1 RepliesI'm having an issue Redirecting to the same domain.
For example, the redirection takes place on ServerA.Domain.com/Folder/application.aspx. However, the program redirects me to ServerA/Folder/application.aspx.
The application works fine on this domain, but I'm forced to relogin.
What can I do to force the redirection to the same domain?
I am using asp.net 3.5
Added My Redirect looks as follows:
Response.Redirect("/Folder/application.aspx?");
This is a followup question to the one here
Here's briefly what I am trying to do. The File server creates a text file to indicate an end of the process. On a webpage on the Web Server, I loop every x seconds and make an ajax request to find out if the test file exists (ajax request to [URL]
I've tried the following approaches so far:
Trigger a web method from the client side that creates a HttpContext object to verify if the text file exists. But this is too strenous on the server and I started getting all kinds of exceptions in the Event Viewer.
I need to make my IIS6 to handle sub domain request to the main website so that i can handle it by using HTTPHandler
But i don't know what modifications should be done on IIS to accept unlimited subdomain name requests
I need to move all requests from one domain to another. I want to change part of URL, like subdomain.olddomain/url -> subdomain.newdomain/url.
I was sure that this is piece of cake and wrote Application_Begin request as:
void Application_BeginRequest(object sender, EventArgs e)
{
string url = Request.Url.ToString().ToLower();
string from = ConfigurationSettings.AppSettings["from"];
if (url.IndexOf(from) >= 0)
{
url = url.Replace(from, ConfigurationSettings.AppSettings["to"]);
Response.Redirect(url);
}
else
{
if (url.IndexOf("error.aspx") < 0)
{
Response.Redirect("Error.aspx?url=" + Server.UrlEncode(url));
}
}
}
So far, I forget, that BeginRequest started only when file physically exist. how I can make such redirect in asp.net without creating hundreds of old pages?
I'm working with asp.net c# web application. We have completed site and hosted in dedicated server (own server).
This server having only one site (sharepoint site). A page having 1000+ images. Loading in base page. And slide show in popup page.
Base page image painting is going on. At same time popup page image is not loading up to base page paint complete. I changed popup image download to some other server means working fine.
Here my problem is same domain more than 2 request web server (iis) not responding up to first 2 requests complete. We can call 2 requests at a time. How to increase more than 2 request in ie. This problem is not available in Firefox. Firefox can manage more than 2 requests. Ie not allows only 2 requests to one domain at a time.
How to send more than 2 requests from ie to a domain?
I need to visit a URL, find a specific text box in said page - fill it with data and then submit a form.
How can I accomplish this in C#?
I am using forms authentication and authorization through roleManager. I have two Roles - "Customers" and "Employees". The redirection to the default page for the "Customers" role is working fine, but I get an oledb error stating that one or more parameters are not being passed when I redirect a user from the "Employees" role. The following is the code in login.aspx that handles the authentication of the user:
If myReader.Read() Then ' We have a match
If myReader(1) Then ' This is true if an Employee and false otherwise
If Not Roles.IsUserInRole(logInUser.UserName, "Employees") Then
Roles.AddUserToRole(logInUser.UserName, "Employees")
End If
ElseIf Not Roles.IsUserInRole(logInUser.UserName, "Customers") Then
Roles.AddUserToRole(logInUser.UserName, "Customers")
End If
FormsAuthentication.RedirectFromLoginPage(logInUser.UserName, logInUser.RememberMeSet)
Else
Response.Write("Invalid credentials")
End If............................................
I generate dynamic grids based on a count value returned from some DB tables. the code for it goes like this : I give and Id to each grid that is generated.
if (myDataList1.Count >= 1)
{
for (int i = 0; i < myDataList1.Count; i++)
{
//retrieving the exact i count from pageload
ViewState.Add("newCount", i);
//creating the dynamic grid with its corresponding gridview properties.
grvDynamic = new GridView();
grvDynamic.ID = "GridView" + (i+3);
grvDynamic.AutoGenerateColumns = false;
grvDynamic.RowCreated += GridViewRowCreated;
grvDynamic.RowDataBound += grvDynamic_RowDataBound;
//adding bound field columns to retrieve data from stored proc
BoundField metric = new BoundField();
metric.HeaderText = "Goal ";
metric.DataField = "metric";
grvDynamic.Columns.Add(metric);
BoundField mtd = new BoundField();
mtd.HeaderText = "MTD";
mtd.DataField = "value_MTD";
grvDynamic.Columns.Add(mtd);
BoundField goal = new BoundField();
goal.HeaderText = "Tier Level Achieved";
goal.DataField = "value_goal";
goal.HeaderStyle.Width = Unit.Percentage(10);
grvDynamic.Columns.Add(goal);
BoundField you1 = new BoundField();
you1.HeaderText = "Month End";
you1.DataField = "firstLevel_you";
grvDynamic.Columns.Add(you1);
BoundField you2 = new BoundField();
you2.HeaderText = "Month End";
you2.DataField = "secondLevel_you";
grvDynamic.Columns.Add(you2);
ButtonField singleClick = new ButtonField();
singleClick.CommandName = "clickHyperlink";
singleClick.Visible = false;
grvDynamic.Columns.Add(singleClick);
BoundField metricId = new BoundField();
metricId.HeaderText = "Metric Id";
metricId.DataField = "metricID";
metricId.Visible = true;
grvDynamic.Columns.Add(metricId);
//binding the gridview to data.
grvDynamic.DataSource = data;
grvDynamic.DataBind();
grvDynamic.Columns[5].Visible = false;
}
}
protected void grvDynamic_RowDataBound(object sender, GridViewRowEventArgs e)
{
//this basically gets the metric Id's of rows with the ishyperlink flag set to 'Y'. I need to make these particular cells clickable var isClickable = (from md in myDataList3 where md.IsHyperLinkFlag == 'Y' &&
md.value_MTD != null select md.metricID).ToList();
if (e.Row.RowType == DataControlRowType.DataRow)
{
// Get reference to button field in the gridview.
LinkButton _singleClickButton = (LinkButton)e.Row.Cells[5].Controls[0];
if (isClickable.Contains(Convert.ToInt32(e.Row.Cells[6].Text)))
{
e.Row.Cells[1].Style["cursor"] = "hand";
e.Row.Cells[1].Style["color"] = "blue";
e.Row.Cells[1].Style["textdecoration"] = "Underline";
e.Row.Cells[1].Attributes.Add("onClick", "window.location ='../HeaderPages/page2.aspx' ");
}
}
}
This code works perfectly fine , depending on the ishyperlink flag in the database...specific cells in the grid are made clickable and then redirected to page2.aspx My Issue: I need to capture which specific cell in which specific grid the user has clicked. store some information in sessions based on the cell clicked and use that information in page2.aspx.
i have an requirment where an user can enter multiple email address.
The validation should ensure that he should enter address in the format "something@abc.com".
my existing validation ensures that some text is entered before "@" symbol and "abc.com" is the domain.
@"w+([-+.']w+)*@abc.com$";
I would need my regex to check for the delimiter ";" between two mail id's .
valid: a@abc.com |
a@abc.com;b@abc.com|
invalid: a@abc.comm | a@abc.com,b@abc.com | @abc.com |
a@abc.comb@abc.com|
I've tried many links but ther were of no use and i'd be grateful if someone could help me modify the current one to suit my requirments
i have a task to add search for available domains and also to find some information about specific one
anyone has any background about how to do that or there is any web services that provide this functionality
In my registration form, there is field to enter email-id of member, i want to restrict user, so that he would not able to enter gmail, yahoo, radiff.... emailids is this possible.., Only company email id eg: priyanka@juncturetech.net must be allowed?
View 1 RepliesI have a registration page I enter the details of the customers and redirect to another page for capturing photo and I come back to the registration page. I want to retain all the values i entered when i land on the registration page.
View 1 RepliesI have also installed SSL on a subdomain. I have put payment page under this sub domain.
View 4 RepliesMy feeling says it's not posible but anyway I am curious if there is at least a workaround for accomplish this.Basically I am working at my client site and my machine is not connected to the domain.What I want to do is running a web application locally under a domain account, and using the webdev server.The webapp uses the default authentication, windows authentication that is.I tried using impersonation with domainuser & password but I got the following error Could not create Windows user token from the credentials specified in the config file. Error from the operating system 'Logon failure: unknown user name or bad password.I have to mention that the username and the password are correct.
View 1 RepliesWe have a ASP.NET site that partially depends on forms authentication for login credentials, however the implementation of IPrincipal is completely custom.
But, when running the site on a particular server (which is somewhat semi-hardened when it comes to security), the app crashes when invoking IPrincipal.IsInRole() with the following messsage:
System.SystemException: The trust relationship between the primary domain and the trusted domain failed.
This indicates a communication error between the web-server and the DC, however since our application doesn't at all utilizes Windows authentication, I don't see why it needs to communicate with the DC.
This is my implementation:
[code]...
EDIT:
I was finally enable to reproduce this error on my dev-machine (i revoked my machine from the DC yesterday, but didn't reproduce it until today)
HttpContext.User is actually a WindowsPrincipal by default it seems, and the error in my code was that I only replace it with CustomPrincipal upon login. Hence, unathenticated users still get the WindowsPrincipal which then fails horribly if you have trust issues on your AD.
I tried changing the default principal by invoking this on appstart
AppDomain.CurrentDomain.SetPrincipalPolicy( PrincipalPolicy.NoPrincipal);
But this doesn't seem to kick in. How do I change the default Principal in ASP.NET?
Im returning the username from sharepoint site as a string. This is done successfully with the below code but I also get the domain with it. How can I only return the username and not the domain either through sharepoint or programmatically removing it? domain/username
[Code]....
My feeling says it's not posible but anyway I am curious if there is at least a workaround for accomplish this.Basically I am working at my client site and my machine is not connected to the domain.What I want to do is running a web application locally under a domain account, and using the webdev server.The webapp uses the default authentication, windows authentication that is.I tried using impersonation with domainuser & password but I got the following error Could not create Windows user token from the credentials specified in the config file. Error from the operating system 'Logon failure: unknown user name or bad password.I have to mention that the username and the password are correct.
View 2 Replies