I have created a snapshot for a report with a default parameters which is having a subreport. Programmatically, i'm trying to access the reports with a parameter value which is rendering the reports with all parameter values. This is working fine if the subreport is removed.
View 1 Replies
I have a reportviewer control (2010) on my form with the following definition.
<rsweb:ReportViewer ID="ReportViewer1" runat="server">
<LocalReport ReportPath="Report1.rdlc">
<DataSources>
<rsweb:ReportDataSource DataSourceId="dsApplicants" Name="DataSet1" />
</DataSources>
</LocalReport>
</rsweb:ReportViewer>
<asp:SqlDataSource ID="dsApplicants" runat="server"
SelectCommand="SELECT * FROM [fApplicants]" ConnectionString="<%$ ConnectionStrings:Club CS%>">
Report 1 has a Subreport, how can I set the Datasource for SubReport?
My web form reportviewer control can't seem to find my sub report. When I debug, it gives an error message in the report that states the report can't be found at file path for the sub report. If I copy and paste the path out of the error into the address bar of windows explorer, the report opens right up. I am using VS 2010, the 4.0 framework, and windows 7.
View 1 RepliesI'm having a problem with Microsoft Report Viewer reports in local mode...
A little background info:
I have a flat data file which I load into memory (split into fields in a dataset) and need displayed in a report. The data structure of this file is hierarchical with about 4 levels: File, Batch, Entry, and AdditionalInfo. The amount and names of the fields in the Entry records change depending on a field in their parent's Batch record (lets call this field BatchType). So while I'm reading Batches i need to look at this BatchType field to know how to read/display the child Entries.
Problem:
Since my Entry sections in my report will be different depending on the BatchType field in the Batch record, I researched a bit and found out that the only way to do this was to do subreports. I figured I'd have to have a different subreport for each Entry type. However, I've been unable to find a way to change the ReportName parameter in the subreport object during runtime. I dont even know if it's possible to change a subreport's ReportName on the fly.
Am using northwind sql server database to do a test. Using customer, order table to show master detail report. Customerid is the reference. After Create a Parameter to run the subreport. Some how i cant able to refernce the master, detail. so it will show all the records in the detail section instead of showing relevant customer id details from the orders table. pls see the picture belowMainreport - > call the subreport parameter. but i miss with one more step to finish the report "Filter Expression", i guess. how to pass the parameter value subreport filter.
Customer.aspx
[Code]....
customer.aspx.cs
[Code]....
I'm developing a web application , and I need to present information in a report.I have this Database in sql 2005, The report has to be a master-detail report so I'm including a subreport.I'm new to reporting I've been reading the example at:
http://www.gotreportviewer.com
as in the example I supply a hadler for the SubreportProcessing event.
private void MainForm_Load(object sender, EventArgs e)
{
this.reportViewer1.LocalReport.SubreportProcessing += new SubreportProcessingEventHandler(MySubreportEventHandler);[code]....
This even nerver fires and the page shows this error: Error: Subreport could not be shown.
I've created a perfect matrix report using the nifty wizard and it's exactly what the client wants, but they would also like to see the detail for each row.I'm able to create subreports and pass parameters and all that jazz, but I'm having a hard time setting up a subreport for this matrix.
MakeOfCar
ModelOfCar
LotLocation Count of cars
I am not getting data in subreport along with main report, But If I run the subreport alone I am getting data.below is the code which I am using , Please figure out my problem and give me the solution.
rptH.FileName = Server.MapPath(
rptH.Load();
ReportClass rptH =
[code]...
I have the following a Master Table that has some Id and a child table with multiple records for that Id, i created a Main rdlc report in asp.net and a sub report, i am having trouble on displaying the sub report as multiple times (i.e. for reach record in the child table for a particular Main Id there should be a sub report with the information related to the child tabke), i was able to display it repeated but it repeated the first record of the child table.
View 1 RepliesMy main report is about half of a page long, subreport contains a table and its length depends on how many rows the table has. But even when a single row, subreport jumps to second page. How to prevent it?
View 5 RepliesI am creating a report using sql reporting services (.rdlc) in asp.net web application. I am displaying master records using List because I need to display one record in one page. In each page now I want to display the child records in a table inside the same List control.
For example: In mater records there will be Department Name, Department Location, Department Zip. In child records there will be Employee Name, Employee Id, Employee Salary, Employee Start Date. There is a link between Dapartment and Employee table by Department Id. I want to display one department record in one page and the all employee of that department in same page in a table. And next page of the report will have other department record and respective employees in a table.
I am being able to display Department records in each page but not being able to display Employees records in a table for particular Department Id. For this I used List control.
Any C# Code or any setting in Reportviewer to call SSRS Subreport from ReportViewerThe SSRS Subreport executes properly from report manager.
View 1 RepliesI'm having some troubles defining and passing report parameters to subreports in VS 2010. In VS 2008 in the design view I was able to right click and define the report parameter and have it passed through.
In VS 2010 that prompt is missing. So my question is, how can I pass a value from a parent report to a subreport in VS 2010?
Additionally, this is what is shown in the Report Properties dialog inside of VS 2010:
For the time being I have defined the parameter in the subreport manually in the XML but I'm receiving an error from the main report when I attempt to pass a parameter of any type to the subreport.
The error is :
An error occurred during local report processing.
Value cannot be null. Parameter name: value
Where I do not have a parameter named value defined anywhere.
I have asp.net page
it has a gridview..
ID
1001
1002
1003
I am trying to call a reporting services report in Report view if I click ID For example, if I click ID 1001 ..it will pass the parameter 1001 And run a reporting services report in Report viewer on new web page..
How can I do this? Is there a example I can take a look?
iam really new to Crystal Report XI Release 2..iam using multiple subreport in mainreport and onclick of particular subreport it would list out all items related to it..for example if u have customer chart(subreport) in mainreport and onclick of this it would list all customer on demand and subreport is binded and onclick of single customer it would list out single customer which sholud be passed as parameter it would get customer(full Contact details) in another subreport.if this can be done. how it can be done and explain in steps how it can be and if possible with screen shots
View 3 Repliesi have 1 master report
and 1 subreport
subreport have Page Header.
when i Independently run subreport it show Page Header,
but when i run master report which have this subreport,
sub report not shown page header.
what is this error.
i use ssrs 2000, can be version problem,
or anything else.
[Code]....
C# CODE :
[Code].... Opening SSRS 2008 report in VS 2010 with Report Viewer?
it possible to pass the query dynamically to sql server report from .net or from any other source.
View 1 RepliesReport viewer from SQL reporting services in VS 2008 report control If I create a new report in VS 2008 they have a .rdlc extension and work correctly.
I have some reports that I was using in SQL reporting services. Extensions are .rdl and want to get them to work with VS 2008.
I copied the rdl files and the .rdl.data files over to VS 2008 (SP1) project but when I go to select the report in the control it does not see the file (I assume it is looking for a .rdlc file)
I tried rename the file to .rdlc and loaded the file up and got
The report definition has an invalid target namespace [URL] which cannot be upgraded.
I see this
[URL]
[URL]
It says
"RDL files are fully compatible with the ReportViewer control runtime. However, RDL files do not contain some information that the design-time of the ReportViewer control depends on for automatically generating data-binding code. By manually binding data, RDL files can be used in the ReportViewer control."
But the link for how to manual bind the data is broken.
Can you please point me to an example of how to implement drill down in RDLC?
I am in a situation where the first report appears perfectly, but when I click on a drill down link , i get an error A data source instance has not been supplied for the data source 'RecuirtmentDataSet_ProfileTracker'.
how to create a Click through report using Report Model.
View 1 RepliesI am working with SSRS reports .I have one report called AllOrderDails with Order_No, Order_Date, Project_Name, Boiler_Name, RefNo, Total_NoItems, Total_GrossWeight, Expected_Date .It shows all order Details ,when i click Order_No it shows another report called OrderDetails.It shows only single Order_No details....In OrderDetails page i am using one textbox for back .It is for going back to AllOrderdetails.
My problem is when i click Order_No in AllOrderDetails page it's show OrderDetails page withrelated Order_No,when i click back it goes to AllOrderDetails Page but It's not displaying any data...
I need to run a ServerReport report from a ReportViewer webapp. But I don't want to have to click on the reportViewer button:
"View Report"
I've set up and assigned the parameters on the report but it always wants me to select the params and click the button.
How do i get around this? here's my code:
[Code]....
When using parameters in an ObjectDatasource for an RDLC report, how can you get the parameter values and display them in the report?
View 1 RepliesI need to make a report with a hidden header , But I need to show the header Only when printing or exporing to Excel or PDF.
View 1 Replies
