I am not getting data in subreport along with main report, But If I run the subreport alone I am getting data.below is the code which I am using , Please figure out my problem and give me the solution.
I'm developing a web application , and I need to present information in a report.I have this Database in sql 2005, The report has to be a master-detail report so I'm including a subreport.I'm new to reporting I've been reading the example at:
http://www.gotreportviewer.com
as in the example I supply a hadler for the SubreportProcessing event.
I have created a snapshot for a report with a default parameters which is having a subreport. Programmatically, i'm trying to access the reports with a parameter value which is rendering the reports with all parameter values. This is working fine if the subreport is removed.
I have the following a Master Table that has some Id and a child table with multiple records for that Id, i created a Main rdlc report in asp.net and a sub report, i am having trouble on displaying the sub report as multiple times (i.e. for reach record in the child table for a particular Main Id there should be a sub report with the information related to the child tabke), i was able to display it repeated but it repeated the first record of the child table.
My main report is about half of a page long, subreport contains a table and its length depends on how many rows the table has. But even when a single row, subreport jumps to second page. How to prevent it?
I am creating a report using sql reporting services (.rdlc) in asp.net web application. I am displaying master records using List because I need to display one record in one page. In each page now I want to display the child records in a table inside the same List control.
For example: In mater records there will be Department Name, Department Location, Department Zip. In child records there will be Employee Name, Employee Id, Employee Salary, Employee Start Date. There is a link between Dapartment and Employee table by Department Id. I want to display one department record in one page and the all employee of that department in same page in a table. And next page of the report will have other department record and respective employees in a table.
I am being able to display Department records in each page but not being able to display Employees records in a table for particular Department Id. For this I used List control.
My web form reportviewer control can't seem to find my sub report. When I debug, it gives an error message in the report that states the report can't be found at file path for the sub report. If I copy and paste the path out of the error into the address bar of windows explorer, the report opens right up. I am using VS 2010, the 4.0 framework, and windows 7.
I'm having a problem with Microsoft Report Viewer reports in local mode...
A little background info:
I have a flat data file which I load into memory (split into fields in a dataset) and need displayed in a report. The data structure of this file is hierarchical with about 4 levels: File, Batch, Entry, and AdditionalInfo. The amount and names of the fields in the Entry records change depending on a field in their parent's Batch record (lets call this field BatchType). So while I'm reading Batches i need to look at this BatchType field to know how to read/display the child Entries.
Problem:
Since my Entry sections in my report will be different depending on the BatchType field in the Batch record, I researched a bit and found out that the only way to do this was to do subreports. I figured I'd have to have a different subreport for each Entry type. However, I've been unable to find a way to change the ReportName parameter in the subreport object during runtime. I dont even know if it's possible to change a subreport's ReportName on the fly.
Am using northwind sql server database to do a test. Using customer, order table to show master detail report. Customerid is the reference. After Create a Parameter to run the subreport. Some how i cant able to refernce the master, detail. so it will show all the records in the detail section instead of showing relevant customer id details from the orders table. pls see the picture belowMainreport - > call the subreport parameter. but i miss with one more step to finish the report "Filter Expression", i guess. how to pass the parameter value subreport filter.
iam really new to Crystal Report XI Release 2..iam using multiple subreport in mainreport and onclick of particular subreport it would list out all items related to it..for example if u have customer chart(subreport) in mainreport and onclick of this it would list all customer on demand and subreport is binded and onclick of single customer it would list out single customer which sholud be passed as parameter it would get customer(full Contact details) in another subreport.if this can be done. how it can be done and explain in steps how it can be and if possible with screen shots
I've created a perfect matrix report using the nifty wizard and it's exactly what the client wants, but they would also like to see the detail for each row.I'm able to create subreports and pass parameters and all that jazz, but I'm having a hard time setting up a subreport for this matrix.
I am getting user name and password promt while trying to access reporting manager URL at a simple test server. and i have tried so many user name and password even of administrator for that machine . but nothing worked for me.also googled it but no success.. and the same thing working on my PC without doing anything EXTRA..Any one master of SSRS ?
I am developing a site that use ReportViewer to show the users a SSRS report. Basically I have my report uploaded in my SQL Server Reporting Services Server (It is an SQL Server 2008 by the way).I want to set the Report dynamically so I do it this way:
I have upgraded web application from VS.2008 to vs 2010. I was using previously ReportViewer 2008 control in a page and replaced with 2010 ReportViewer Control.
I have installed the ReportViewer Redistributable also in my local pc as well as in the server. Also as per the new requirement I have placed the Scriptmanager in the web page where the reportviewer control located.
While running the page, the reportviewer run the report and is not showing the data on the screen. It shows the blank screen. But If I export the data to execl or world it is showing the data. Also the page numbers in the reportviewer showing the total pages available in the navigation bar. I am sure the report is running and bringing the data to the screen but not showing it.
I am calling a report from my ASP web app and was working perfectly, but now for some reason the report is coming up as blank and only shows the header section where it shows export, page numbers etc...The report works 100% direclty from reports and reportsmanager but not from my application - there are no errors to even guide me to solving it.At first i had reporting services 2005 and was having this problem and then i installed Reporting services 2008 and hosted the report on there but i am still getting the same problem.....very frustrating!!Does anyone have any idea what could be causing this??
This might be a clue: this app is on my clients pc and i installed VS2010 on the pc so i can try troubleshoot this but when i open the app VS2010 tells me it is setup to use framework 2.0, strange cause before this problem i opened it in vs2010 and was in framwework 4.0 - but now ifi go to the build dropdown it does not give me the option to select framework 4.0 - just goes up to 3.5??the app was originally created in VS2005 then I upgraded it to vs2010.........it could be possible that there is aconflict with the report viewer on the webpage conflicting somewhere???the app still works 100%(except for reporting) on IIS using framework 4.0 so it is still on the PC..please help - my client is unable to use the app without the printing and i am getting desperate!!Here are the hardware and software details:
-Windows 7 Pro -IIS 7 -framework 2, 3.5 and 4 -ASP.net 4 Web app developed in VS2010 -DB on SQL 2005 exp adv -also have SQL2008 exp adv installed
I am developing one Main rdlc Report Say "C" with Subreports A and B.Each report getting Data with different Datasources(DataSets).When Data is not coming for SubReports A and B, report is generated but I am getting the error message as Data retrieval failed for the subreport, 'Subreport1', located at:LocationSubTrade.rdlc. Please check the log files for more information.
private void ProcessMainReport() { LocalReport reportContractNote = new LocalReport(); reportContractNote.SubreportProcessing += new SubreportProcessingEventHandler(prcProcessSubReport); reportContractNote.ReportPath = ReportPath; ReportParameter recipientIDConsoCN = new ReportParameter(strparamRecipientIDConsoCN, RecipientID);
I am building a report using the Matrix for the first time. It's showing duplicate days across the columns and I can't figure how to filter so that a unique day appears.
I have 2 row groups, quality_code and product_name, and 1 column group repair_dt. In the Date column I showing count of serial_id - associated with product_name this is what I am getting
I m using Client side RDLC reports, the problem which i m facing is that IE shows the report with Print button but Morzilla Firefox does not show print button. How can i rectify the above problem or an alternative soln.
am using SSRS with MS SQL Server 2008 R2, which has the new feature of supporting shared datasets.First, I created my shared dataset, and made sure that it worked correctly and had a good connection. That worked great.Second, I created a new report (Let's call it "ReportSub"), and I had it use my shared dataset. The report works great.Third, I created another report (Let's call is "ReportMain"), and I put a subreport object into the report and associated it with "ReportSub". Doesn't work. Instead, I get this error:
Data retrieval failed for the subreport, 'ReportSub', located at: /ReportSub. Please check the log files for more information.Any ideas of what the problem may be? It will work if I use an embedded dataset, but I really need to use a shared dataset.
I created an AR statement using crystal report. The main report gets customer info and use customer ID and from and to dates to link to three sub reports. The three subreports are (1) opening balance, (2) list of transactions and (3) aging summary. When I previewed it from VS2005 design mode, everything shown pecfectly however when I run it from VB, only the list of transactions shown and the other two subrreports only showed labels but no data. In addition, I can send the report to printer and no PDF can be generated.