SQL Server :: Stored Procedure Output In Gridview Incorrect?
Feb 10, 2011
We had a simple Gridview that displayed a column list as Linkbuttons but we now need to display three columns as one, so I wrote a simple stored procedure to do it. However, the output in the Gridview shows duplicates and is not in order even though I specifySELECT DISTINCT in the result select as shown below.
ALTER PROCEDURE [dbo].[GetGeneralAction]
Add the parameters for the stored procedure here
AS
BEGIN
SET NOCOUNT ON;
CREATE TABLE #TempTbl (GeneralAction varchar(300) )
INSERT INTO #TempTbl (GeneralAction)
SELECT [General Action]
FROM [dbo].[Formulary2011]
INSERT INTO #TempTbl (GeneralAction)
SELECT [General Action2]
FROM [dbo].[Formulary2011]
[code]...
I'm still trying to deploy this site, but with every problem I solve, another arises. Anyways - I've set up the database at my hosting to allow remote connections, and it is running Sql Server 2005. On my development machine, I am working with Sql Server 2008.
I've installed the asp.net schema on my hosted database, and have created several users from the ASP.NET web administration interface, as well as tested that the login works. Running the application locally with the remote connection string nets the same results. However - I'm able to run my scripts and generate my tables and stored procedures without errors - but when the site is run I get the following error on all of my .aspx pages that try to access a stored procedure:
Server Error in '/' Application. Incorrect syntax near 'LoadProfileData'. Description: An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Incorrect syntax near 'LoadProfileData'.
Source Error:
Line 62: adapter.SelectCommand.Parameters.Add("@ProfessionalName", SqlDbType.VarChar).Value = professionalName; Line 63: DataSet profile = new DataSet(); Line 64: adapter.Fill(profile, "Profile"); Line 65: return profile; Line 66: }
Is this a possible Sql 2005 vs 2008 issue? I'm hoping someone else has seen this issue in a similar scenario and can point me in the right direction. The server is running asp.net 2.0, 3.0 and 3.5 and IIS 7.0.
I have written SP like this to get my required output.create procedure [dbo].[usp_gl_ProjectBudgets] set nocount on begin tran declare @SPError int
declare @y1 varchar(20) declare @y2 varchar(20) declare @y3 varchar(20) declare @y4 varchar(20) declare @y5 varchar(20) declare @Glink int declare @i int set @y1='Year1' set @y2='Year2' set @y3='Year3' set @y4='Year4' set @y5='Year5' set @Glink=1 set @i=1 [code]...
set ANSI_NULLS ON set QUOTED_IDENTIFIER ON go Create PROCEDURE [dbo].[sp_GetNextSeq] ( @p_NextSeqNo int = NULL OUTPUT ) AS BEGIN SET NOCOUNT ON; BEGIN TRY BEGIN TRANSACTION Generate Next Sequence Number [code]...
I am creating a nightly process using a stored procedure to check for expiring records and emailing myself and the folks that need to see the information. The trouble I am having is trying to send the data in table "like" view in the message body.Here is the Proc you can see the point at which i try to use a table vairble then use it as a parameter for calling the email proc but it doesn't seem to work.
I have a stored procedure that works fine for classic asp, but how can I get my output parameters data back from in /MVC 2 / linq/ entities framework model . I have inported the function also, but when i try to code it i dont get results ...i know this is a matter of lack of / knowledge or exmple because i have been scouring the web for it and cannnot find into that accually works.
here is the stored proc.
[Code]....
Here was the one of the few tries I did:
[Code]....
but it executes fine does not give me an error, but also does not return the info i need to the viewmodel
I keep seeing stuff about "ref" on the net but "ref" shows " arbument # should not be passed with the ref keyword.
So i am not sure if there is a problem with the model, or with my understanding this, Now for your info I can do the same step with returning a dataset from a stored procedure fine, but I dont want a data set I just want excatly the data in the output parameters from the stored procedure.
I'm still trying to deploy this site, but with every problem I solve, another arises. Anyways - I've set up the database at my hosting to allow remote connections, and it is running Sql Server 2005. On my development machine, I am working with Sql Server 2008.
I've installed the asp.net schema on my hosted database, and have created several users from the ASP.NET web administration interface, as well as tested that the login works. Running the application locally with the remote connection string nets the same results. However - I'm able to run my scripts and generate my tables and stored procedures without errors - but when the site is run I get the following error on all of my .aspx pages that try to access a stored procedure:
Server Error in '/' Application. Incorrect syntax near 'LoadProfileData'. Description: An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Incorrect syntax near 'LoadProfileData'.
Source Error:
Line 62: adapter.SelectCommand.Parameters.Add("@ProfessionalName", SqlDbType.VarChar).Value = professionalName; Line 63: DataSet profile = new DataSet(); Line 64: adapter.Fill(profile, "Profile"); Line 65: return profile; Line 66: }
Is this a possible Sql 2005 vs 2008 issue? I'm hoping someone else has seen this issue in a similar scenario and can point me in the right direction. The server is running asp.net 2.0, 3.0 and 3.5 and IIS 7.0.
Stored Procedure:
Drop procedure CreateDefaultProfile GO Create procedure CreateDefaultProfile(@UserName varchar(256)) as declare @ProfessionalID uniqueidentifier
i had a stored proc: How can i get the final select statement in the code behind.
ALTER PROCEDURE [dbo].[tgms_reclass_PO_bip](@po VARCHAR(20), @old_gl VARCHAR(20), @new_gl VARCHAR(20),@output varchar(500) out ) AS IF (SELECT COUNT(*) FROM mm2po WHERE scode = @po) = 0 BEGIN SET @output = '1' SET @output = 'Invalid PO Number' END [code]...
From this below stored Procudure, using VB.Net code can i get the Values like "Number of Rows Affected" and "Yes / No" Value from "Select"Stored Procudure:ALTER PROCEDURE [dbo].[lookup] @week_date datetimeAS
DECLARE @currweek datetime, @inweek datetime IF @week_date = '10/14/2010' BEGIN UPDATE dbo.work_status SET ob_flag = 0, ob_update_date = NULL WHERE dbo.work_tatus.week_date ='10/14/2010' SELECT 'YES' END ELSE SELECT 'NO' RETURN 0
I am having some trouble with the below code snippet. It is a stored procedure which executes on load that has an output parameter which should display in a label. Familiar which Vb however not so much in C#.
i hav declare a Variable in stored procedure as@Total numeric(18,2) output..@Total Value is calculated 177.12 in stored procedure but when i return in Class.cs..its output is 177..
I have a question. How do we define date output parameters for a stored procedure?
before you answer,I should mention that I am not referring to the sql syntax definition ,which is @mydate datetime output.
This is ok,what i am asking is HOW DO I SPECIFY IT IN LINQ WHEN I NEED TO CALL THE STORED PROCEDURE IN THE SERVER SIDE CODE. I am repeating that I do I am not referring to the sql definition .
using (SqlDataReader sqlDataReader = ExecuteReader(CommandType.StoredProcedure, StoredProcedures.AuthenticateUser, sqlParameter)) { isAuthenticated = Convert.ToBoolean(sqlParameter[2].Value); if (isAuthenticated) { if (sqlDataReader.Read()) { User = new UserEntity(); DbHelper.GetEntity(sqlDataReader, User); } } }
I always get isAuthenticated as false because sqlParameter[2].Value is null all the time but when I execute my query with ExecuteNonQuery it gives me the value but in that case I can not fill the entity.
I have stored procedure that increments a number. I am supposed to use the newly generated number and insert it into a table. My question is how do I execute the stored procedure, with a hardcoded value of 3 that it expects as a paramter, receive the number it generates as the output parameter and use it in the insert statement.
Here is the stored procedure code:
CREATE PROCEDURE [dbo].[Generate] @myid int, @next_no int output AS update mytable set mynumber=mynumber + 1, @next_no = number where myid=@myid RETURN
Here is my insert statement, that I tried and it failed:
I have created stored procedure and student database and also asp.net application for asp.net page but it could not found stored procedure what is the mistake actually I don't no
how can I create stored procedure and write my select statement in it, I know how to create dataset then put type stored procedure and assign it to the sp ... what I want is writing my sp... how can I make it ?
check the following code, this is what I want to write put I don't know where or how !
I have a gridview that calls data via a stored procedure. I am unable to enable the gridview columns to be sortable. I need to set the parameter in the Stored Procedure.
Here is my gridview:
[Code]....
And here is my Stored Procedure, I want to pass the sortExpression to the gridview:
I am trying to create the following stored procedure in sql server Lat and Lng are the parameters being passed from c# code behind .But I am not able to create this stored procedureit indicates with error saying undefined column name Lat,Lng
CREATE FUNCTION spherical_distance(@a float, @b float, @c float) RETURNS float AS BEGIN RETURN ( 6371 * ACOS( COS( (@a/@b) ) * COS( (Lat/@b) ) * COS( ( Lng/@b ) - (@c/@b) ) + SIN( @a/@b ) * SIN( Lat/@b ) ) ) END sqlda.SelectCommand.CommandText = "select *, spherical_distance( Lat, 57.2958, Lng) as distance from business [code]...
Initially, I have tried to use stored procedure. But I changed my mind and preferred to call sql query in codebase with command text. However, it stills tries to find initially-called stored procedure (which is neither called or exists).I think that it is related caching. But I tried it with different browsers it did not work.What might be the reason?
