Security :: Access To Shared Resource On A Different Domain?
Nov 11, 2010
Server A exists on domain A and server B exists on domain B. From server A I need to output file names that exist on shared folder on server B. I tried the following with no success (Access denied error):
DirectoryInfo dir = new DirectoryInfo(@"\serversharedFolder");
After some Googling I found that I need to use personlization to impersonate an existing user on Server B that has access to that shared folder. I used a C# personlization class as explained on codeproject (http://www.codeproject.com/KB/cs/cpimpersonation1.aspx). I supply the domain, the user, and the password and hope to get access to the shared folder BUT the error I see now is"Login failure: unknown user or bad password".
I am 100% sure that the domain, user, and password I supplied are correct. When trying to access the share via windows explorer from server A I am prompted for a username and password. After entering domainusername and the password I have access to the folder. So I know that the credentials I supplied are correct.
Am I going about this the right way? I have full access to server A and B so maybe there is an easier way to accomplish my goal.
View 6 Replies
Similar Messages:
Feb 17, 2010
i developed an asp.net(2.0) applicaions which contains the attachments of the clients . these attachments are saved in the shared folder and retrive the file when the user requests.if i maintain the application and the shared folders in the same system it will work properly.if i maintain the application in one server and the file folder in the other server i face a lot of security issus like1.Access Denied2.Couldnot find the part of the path......for this i made an common account for the application server and the file server and also set impersonation to true.Even the i got the couldnot find the part of the path error.i already gave the everyone with full control to the shared folder and i added the common account and gave it to full controlIs there is any alternate for the save and retrive the files to and from the shared folder.
View 3 Replies
Nov 28, 2010
I am trying to access a shared folder which is located on a different server rather than on the asp.net server.
I configured windows authentication and set impersonation to true. Also try with enable/disable basic authentication.
I have tried the following:
with a mapped driveshared folder access (\sharedfolder)virtual directory pointing to shared folder with pass through configuration. However none of the above works. I am getting "Access Denied" error when trying with shared folder and virtual directory. In the case of mapped drive getting "Not Found" error.
View 4 Replies
Jul 2, 2010
i am currently developing an asp.net mvc 2 web application and i would like to create new foldersprogrammatically with access rights, in order to enable loged on users upload their image files.My question has to do with how to assign write access using Directory.CreateDirectory function and assigning DirectorySecurity rules (meaning for which user should i enable user rights, etc...). Note that the hosting envirnoment uses IIS 7.
View 1 Replies
Mar 9, 2010
Im working on an application that has a login section that accepts a username and password. On successful login a userid is returned and encrypted with TripleDesKey. The user details are then stored in a session object. We already have a class library that performs encryption and decryption using a key in the web.config file. I basically want to be able to access the user details of the currently logged in user in a page accessed from the main site that may be in a different domain, but is effectively part of the same site, so I wont have access to the session object from the main site. so basically a user logs in, I have the user details stored in a session object, I also have access to the encrypted userid also in a session object. If a user then clicks a link to another page that is in a different domain, how do I persist the userID?
I suppose I could I tag the encrypted userid to the querystring, but security could be an issue here (even though the id is encrypted, someone could still modify it)
View 2 Replies
Jun 29, 2010
Currently in my application using LDAP to authenticate user to a specific domain & then i check if the user exist in my site database.
Now i need to also allow users who do not belong to this specific LDAP domain to access my site ..How can i make it possible withoput affecting the exisiting users?
View 1 Replies
May 12, 2010
I have just started to use asp.net mvc.
I have read this article about using ntlm authentication
[Code]....
it provides access to specific domain users
[Code]....
I want to restrict access to all my domain users only lets say
[Authorize(Domain="redmond")]
or do I do it via web.config
View 2 Replies
Sep 18, 2010
How can I access the cache of one web application/domain from another web application/domain?Here is my scenario. I need to verify/check the existence of a certain object in one web application/domain's cache from another web application/domain.
View 1 Replies
Apr 23, 2010
I've been researching and I've spent pratically all day on this. Here's my issue. The website uses forms authentication that we authenticate against active directory. I've been attempting to access files we have on a network share and push them down to the user (when they request them) in an http response. I keep getting "Access to the path <unc path> is denied".
Here's the code:
[Code]....
Things I've tried:1) When I add the "Computer" to the permissions of the folder it works and I dont even need to emulate a user (essentially just commenting out this code), but I'm not sure we want to explicitly give the computer access to some of our network shares 2) I've verified it's the correct username and password for the active directory account and that they have permissions on these network shares 3) I've fooled around with the WebProxy class with no luck (as I'm not entirely familiar with it) 4) I've tried impersonating the user by creating a windows token and passing the token as credentials (i've done this with similar websites) with no luck, plus this seemed a bit complicated for something I figured would be relatively easy.Its almost as if, the WebClient class isn't even using the credentials i've passed it.We've got it working now, but only by giving the "Computer" specific permissions on the network shares, which we'd like to avoid.
View 1 Replies
Sep 28, 2010
My feeling says it's not posible but anyway I am curious if there is at least a workaround for accomplish this.Basically I am working at my client site and my machine is not connected to the domain.What I want to do is running a web application locally under a domain account, and using the webdev server.The webapp uses the default authentication, windows authentication that is.I tried using impersonation with domainuser & password but I got the following error Could not create Windows user token from the credentials specified in the config file. Error from the operating system 'Logon failure: unknown user name or bad password.I have to mention that the username and the password are correct.
View 2 Replies
Jul 23, 2010
I have a domain: http://www.mydomain.com. This domain is redirected to http://mydomain.anotherDomain.com.
I user forms authorization, so when the user navigates to Default.aspx he is redirected to Login.aspx. Pretty standard stuff.
On FireFox the user can log in on both on http://www.mydomain.com and http://mydomain.anotherDomain.com.
But with Explorer http://www.mydomain.com doesn't work. I only get the Login.aspx page.
Can it have anything to do with that on http://www.mydomain.com I can't see the filename ('Default.aspx', 'Login.aspx')? How can I enable so the filename is included in the redirected domain?
View 3 Replies
Jan 27, 2011
I have an intranet web application. There are 2 user groups, group A belongs to the domain and group B does not. If I set the IIS to enable anonymous access, Request.ServerVariables("LOGON_USER") always return nothing. If I disable anonymous access and set Integrated Windows authenication, a Windows login prompt will come up if group B's users want to access the website.
How can I setup IIS so that when domain user access the website, it will direct to the main page with Session("user_name") = Request.ServerVariables("LOGON_USER"). If a user is not a domain user, the website will direct him/her to a login.aspx instead of having the Windows authenication prompt, then set Session("user_name") = txtUserName.Text, and finally redirect to the website main page ?
View 2 Replies
Apr 12, 2010
We have a website for our company on one domain and we have a login form to a webmail solution on another domain.Now i would like to build a form on our website the transfers the request to the login form on the webmail domain and automatically validate the user if user and pass are correct.Need help to find the correct way of doing this. The domains is hosted by our company, the website and webmail is on different servers. I don't want to use the querystring,
View 3 Replies
Jan 5, 2010
let me know what does these access modifiers means.private shared vs public shared vs protected shared
View 5 Replies
Apr 19, 2010
I'm looking for a direct way for server-side code to access a flash shared object. Obviously you can write some javascript that can read flash shared objects via ExternalInterface. But doing that requires a client code execution, and then a push of the shared object data back to the server-side code. This seems rather complicated.
So is there a way for asp.net, php, or any other server-side script to request the data in a flash shared object?
View 1 Replies
May 25, 2010
I tried searching, but I guess the <% $ %> triggers something on google and it turns up nothing. What is this accessing in an asp.net .aspx page? I've used the = but never a $.
View 2 Replies
Oct 17, 2010
I'm trying to access global shared memory from an ASP.NET web method while impersonating a client, but I get access denied when trying to open the handle. As an example:
[WebMethod]
public string Testing()
{
string result = null;
using (var ctx = WindowsIdentity.Impersonate(IntPtr.Zero))
[code]...
View 1 Replies
Aug 28, 2013
In my application, first, i have not connected to iis server, and trying to access secondary path at this time it is accessing that path. but when it is connected to IIS server, it is giving unathourizedaccess exception.
View 1 Replies
Jan 21, 2011
I am trying to achieve a SSO implimentation across my websites so i am using the machine key attribute to do so.now the trouble starts here as the website the user logs in is on the .net 1.1 framework and the website it it navigating to is .net 4.0.I have share the same machine-key across both the application . It works fine in my testing environment but as i move to the deployment server ,it just dosent work !So what i could do is read this article on MSDN :
http://msdn.microsoft.com/en-us/library/eb0zx8fc.aspx
this tells me to add a domin attribute like below
<forms loginUrl="~Login.aspx" defaultUrl="Default.aspx" protection="All" timeout="80" name=".ASPXAuth" domain="asbc.com"/>
but this thing just dosent work on the 1.1 application and throws an error Unrecognized attribute 'domain'.
Where do i get to mention the domin in my 1.1 application.?
View 3 Replies
Mar 26, 2010
Assembly 'LocalizationRes, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' contains a Web resource with name 'LocalizationRes.VerifyDeletion.js', but does not contain an embedded resource with name 'LocalizationRes.VerifyDeletion.js'. getting an error saying like this while I am trying to acces the Resource file through Ajax...
View 2 Replies
Dec 29, 2010
I want to implement resource based access in asp.net mvc project.For example i have create employee, edit, delete employee and view employeei want to implement a funcitonality where administrator can assign resources to user for example user with moderator can only view employees and user with administrative priviledge can create, edit, delete and view employees list.How can i implement this functionality?Any articles on internet on this topic?
View 4 Replies
Jul 8, 2010
i know that i can set a Label's text by using this syntax:
lblMessage.Text = (string)GetGlobalResourceObject("resxFile", "message");
but what's the difference(benefit/drawbacks) to using this syntax:
lblMessage.Text = Resources.resxFile.message;
also, i just found out that this second method doesn't work for local resource files. is there a different syntax used for local resource files?
View 1 Replies
Mar 7, 2011
I am trying access a file from shared path and I face this error.
View 3 Replies
Jun 28, 2013
I would like to connect to a password protected shared location that has an access database using an ASP page. I have the user name and password needed to connect to the shared location but I am not sure how to set up the connection string in order to get this done. The access database I would like to connect to does not need a username or password, only the shared location does.
View 1 Replies
Feb 15, 2011
We have a web site on customer server. It is being locked every 2 or 3 months. I posted this subject before. For understanding the error I created a log file. When the server locked I look the log file and saw "system resource exceeded" error message. Have you any idea about this error.. When restarting the server it continue.
View 5 Replies
