Security :: Windows Integrated Authentication?
Mar 11, 2010
What's happening is when windows authentication/authorization fails the user get's a login prompt in IE6, IE7 and FireFox. Only when user clicks Cancel button in login prompt they are getting to 401 error page. What I am trying to achieve is to automatically redirect the user to a custom error page when getting 401 error instead of getting login prompt. Is this possible to suppress the login prompt in this scenario or is it this way by design?Here is my setup:I have windows integrated authentication configured in asp.net 2.0 web app.
[Code]....
In IIS I have website Directory Security configured to use Integrated Windows Authentication and disabled Anonymous Authentication
View 3 Replies
Similar Messages:
Jan 4, 2011
What's the difference between Basic Authentication and Integrated Windows Authentication in IIS?
View 3 Replies
Nov 2, 2010
In my masterpage application i have "Integrated windows authentication" enabled and it works fine for Active Directory Users. but i have created some users in my aspnetdb and i want few users to login and use my application. But for created users in aspnetdb i can getting "windows login screen". means when users not on active directory try to access application instead of getting login page, they get windows auth login popup.
View 1 Replies
Jan 27, 2011
I've set up an ASP.NET MVC application for my company's Intranet that grabs the user's NT creds via System.Web.HttpContext.User and checks against its own database to perform authentication/authorization.This works just fine on my local machine, and I assume it will also work once deployed to the production server, but the development server is on a different domain than the users. While trying to test the app, Iget prompted for a username and password, which isn't supposed to happen. Worse, entering my login creds still doesn't work. I'm deploying a MVC 2 application to an IIS 6 server.The steps I read to take to get Integrated Windows Authentication to work included putting these lines in my Web.config file:
[Code]....
Then, on IIS in Directory Security uncheck the checkbox that allows anonymous authentication, and make certain that only Windows authentication is checked in the access methods section. I've done these things, but since I'm dealing with cross-domain authentication, it's dead in the water. I tried a Google search, and I'll continue with this, but I haven't found anything yet. I'm not incredibly savy when it comes to domain issues, so I might have seen a possible solution and not recognized it.
View 5 Replies
Jul 26, 2010
I have an intranet set up with IIS and it is working fine with windows integrated autehntication. However I have some permissions set and when certain users do not have access they get prompted for their login and I don't want this. I want it to go straight to the access denied page.
I read that "In integrated Windows authentication, the browser tries to use the current user's credentials from a domain logon, and if this attempt is unsuccessful, the user is prompted to enter a user name and password. "
So I understand this is supposed to happen but I was wondering if there was anyway to not have it prompt for a username and password if the first attemp is unsuccessful.
View 2 Replies
Mar 29, 2011
My web application need to list the network share information. The return code is '5' after I call NetShareEnum[Netapi32.dll] in windows integrated authentication.
I found that currently I am using Kerberos protocol to authenticate the access users and the token is grenerated with [TokenImpersonationLevel.Impersonation].
Who know how to resolve this problem? Is there any way to get a token with [TokenImpersonationLevel.Delegation] in Kerberos? BTW, I am sure about that the access user has the Access privilege to list the network share in target server.
View 1 Replies
May 31, 2010
I am trying to force to show to the Logon popup when the session is timeout in Integrated Windows Authentication Enabled website. The session_timeout is firing during the session timeout, but the User.Identity.IsAuthenticated is true. How force to use the Windows Logon Screen when the session is timeout.
View 4 Replies
May 13, 2010
We have an ASP.NET web application which uses integrated windows authentication. It is accessed by users from two domains, A and B. A is the primary domain and B is an older domain which is going away. Web application is authenticating users using a group policy which only exists in domain A. Every user in domain B has an account in domain A. The application lives in domain A. There was no trust between the domains. So users from domain A would get silently authenticated and logged into the site. Users from domain B didn't get authenticated automatically and were prompted with the IE popup, to which they authenticated using their domain A credentials and everything worked. Now somebody has set up a trust between the domains and users from domain B get authenticated silently to IIS, and then their login fails (no group policy). So the question is:
can I either programmatically or in IIS configuration make it so that users from domain B still get prompted even though there is trust between the domains? Is there a way to tell the server where IIS is running to ignore the trust relationship maybe?
View 1 Replies
Dec 7, 2010
Will I be able to access a Asp.net website on IIS 7 with integrated windows authentication enabled from outside the domain?
View 1 Replies
Feb 9, 2011
Is there any way to change the content of a Windows Integrated authentication dialogue box?
View 1 Replies
Feb 9, 2011
I have just started building an asp.net web service with visual studio 2005. However whenever i try and run the site i get this message, saying "debugging failed because integrated windows authentication is not enabled". I am at a loss of how to correct this problem.
View 1 Replies
Mar 23, 2011
I have a .NET 3.5 application running under IIS 7 on Windows 2003 server and cannot get integrated windows authentication working properly as I continue to get prompted for a login. I have set Windows Authentication to enabled in IIS with all other security types
disabled and my application web.config file authentication/authorization is set up as:
<system.web>
<compilation debug="true" strict="false" explicit="true" targetFramework="3.5" />
<authenticationmode="Windows"/>
<authorization>
<deny users = "?" />
</authorization>
</system.web>
With this setup, I'm expecting behind the scene verification of the Windows user to allow access and deny anonymous users. However, what I'm getting is a Windows login pop-up when I try to access the site. I have been troubleshooting this issue for a few days now and cannot figure out the problem. Based on posts with similar problems, I confirmed my URL does not include any periods, double checked that my IE settings are set to Enable Integrated Windows Authentication, and also added my URL to my intranet sites, but still getting the pop-up. To troubleshoot it further, I enabled Anonymous Authentication in IIS and modified my web.config file to which lets me right in and then added Response.Write(System.Security.Principal.WindowsIdentifity.getcurrent().user.name.toString()) to try to see what user is being used in the authentication. The result I'm getting is IIS APPPOOLmyapp which is obviously the IIS application pool for my application.
I'm still using only windows authentication but don't get the pop-up and the windows authentication is performed against the actual Windows user. Just noticed that when the login fails and the Windows login prompt displays again, it is showing the username that attempted to login as "SERVERNAME""USERNAME" which led me to believe it was trying to validate the user against the server vs. the domain. To confirm this, I created a local user account directly on the app server with the same username and password as the network domain user and tried to login again. The result was that I received the login prompt again but when I entered the username and password this time, I was able to successfully login. The network user and app server are on the same domain so really not sure why IIS authentication is pointing to the local app server accounts and not to the domain accounts. I realize this is an IIS question at this point so posting on forums.iis.net as well but anyone may have since have been troubleshooting this for days.
View 1 Replies
Mar 22, 2010
I am working on an application that uses windows authentication. Within this application, we give the user the ability to change their password. The user can change the password just fine. However, after they change their password, that is when things get weird. Sometimes they can navigate through the application just fine. Other times, they click on a link and are immediately prompted to supply credentials. Occasionly they can click on a link but upon a second click they are prompted to supply credentials. Does the browser keep a token to the original credentials and use this when they request the next page? If this is the case, why can i continue using the site sometimes? Can I change the password and then assign that token to the request?
View 1 Replies
Feb 16, 2011
I have an silverlight application configured with windows integrated security. I would like to emulate the "Sign in as different user" functionality I would like to give the user, the option to click a button and show the windows authentication login window, so that the user can enter the "User name" and "Password" again using another domain account. (btw i found this question on another site but with no answers, I need the same thing so i copy/pasted a bit)
View 1 Replies
Aug 9, 2010
My website security is configured with "Windows Integrated Security" only (anonymous is disabled).
I also want to set a specific account to run the w3wp.exe process using the
Application Pool Identity to a domain account.
Running directly from the server works without any problem but from remote computers I always get the authenticaion window then the 401.1 error (after 3 attempts).
It seems that its the combination of "Windows Integrated Security" along with the "Application Pool Identity" that causes the problem. When I disable one of the two it works properly.
My server is Windows Server 2003 R2, running IIS 6.0.
View 1 Replies
Aug 6, 2010
I've got Integrated Security up and running.Am I correct that when users initially access the site that they have to enter their user name & password? I was thinking that Integrated Security would allow the user to go directly to the site (it is an on intranet) without having to enter the un/password. My thought was that Integrated Security would eliminate the needs for the user to sign in once they've signed into Windows when they start up their machines.
View 2 Replies
Apr 13, 2010
I'm not entirely sure if this is the right place to ask, but here goes.
I have a website that uses windows integrated authentication. This is great and the way i want it, BUT, i now have a single .aspx file in that site, that i would like anonymous access to.
I am running this on IIS 6 on a windows server 2003.
How do i go about doing this, if i even can do it? web.config, IIS console or do i need to make a new site for this one file alone?
View 4 Replies
Sep 8, 2010
I have set up a directory on my IIS web server that is protected by "Integrated Windows authentication". I want visitors to be required to enter a name and password to view files in the protected directory except if they are following a link to files in the protected directory from a certain page on my website.
I am doing this to try to get better protection from search engine spidering than is provided by using a robots.text file.
I am using ASP.NET 3.5 with VB. I am wondering if there is a way to pass the log on credentials to the IIS server via a link, or if there is a way to fill in the name and password for the login screen automatically, or something else that would work. It is OK if the login name and password are visible to the visitors.
View 3 Replies
Mar 10, 2010
I set authentication mode to Windows in the web.config and I enable Windows Authentication and disable the Anonymous Authentication in IIS 7 on win 7, but HttpContext.Current.User is always null.It works fine when I host the web app in IIS 6.0.
View 1 Replies
Dec 30, 2010
I have been trying to avoid the windows login userid and password window when I use the Windows Authentication mode for a web site. I need to capture the the windows logon user name without prompting for the user id and password and display that on the web site. I had tried almost everything... changed authentication,security setups on IE and IIS etc... still not being able to avoid the window...
View 1 Replies
Sep 3, 2010
What do I need to do in order to change an application from Forms Authentication to windows authentication?
View 2 Replies
Sep 8, 2010
We have a working version of application (Intranet) with uses Windows Authentication deployed in Windows 2003. The application uses HttpContext.Current.User.Identity.Name to get the logged-in user. Here impersonate is turned off.Right now, we are move to Windows 2008 RC2 where this Windows Authentication problem arised. I have Digest Authentication and Windows Authentication enabled. And also I have enabled Anonymous Authentication enabled to avoid the Login dialog of IIS in the end-user IE. Now I am getting HttpContext.Current.User.Identity.Name as Empty. When I impersonate using username and password, I am used to login using that user but all the users uses the same user to login.Does any has solution for this?Deployment Server - Windows 2008 RC2 (IIS 7.5)Development - Windows 7 (IIS 7.5)I am new to IIS 7.5. Please give me a solution
View 3 Replies
Sep 3, 2010
I am developing one intranet website. Being an intranet application, one of the requirement is to have a single sign on feature.
It means that the windows PC username (i.e the "ctrl + alt + delete" username) is going to be the username for the system.
How do i fetch that username?
I tried the following two ways which are working in debug mode but not on live site.
System.Security.Principal.IPrincipal user = System.Web.HttpContext.Current.User;
Response.Write(user.Identity.Name);
&
Response.Write(Request.ServerVariables["AUTH_USER"].ToString());
Both the above method works when i run the page from visual studio.
However when i run the page from IIS or any other server, it gives me a blank value
View 12 Replies
Dec 15, 2010
I have to invoke SSIS packages from web service in the most secure way. I think that windows authentication will be secure but i am not sure. I do not have much knowledge about how to achieve this and the information on the internet is very distributed.
View 1 Replies
Apr 6, 2010
We use Sharepoint to control our websites. We build the sites, then load them into the sharepoint server. My question is if I use windows authentication, how can I get my role security in my web config file to coencide with the asp.net controls that use the Forms authentication. Is there a differenence? Our security uses a session variable for security but there is no where to set up their permissions except in active directory. I hope this makes sense because I would like to implement the LoginView with Role groups but how can I give them the role="administrator"? Do I have to go into active directory and give them these permissions(would take awhile due to the size of the company)? Or do I have to set up priveladges in the web.config file for each user(difficult I think)?
View 5 Replies
