Security :: Disabling Integrated Authentication On Single File?
Apr 13, 2010
I'm not entirely sure if this is the right place to ask, but here goes.
I have a website that uses windows integrated authentication. This is great and the way i want it, BUT, i now have a single .aspx file in that site, that i would like anonymous access to.
I am running this on IIS 6 on a windows server 2003.
How do i go about doing this, if i even can do it? web.config, IIS console or do i need to make a new site for this one file alone?
View 4 Replies
Similar Messages:
Jan 4, 2011
What's the difference between Basic Authentication and Integrated Windows Authentication in IIS?
View 3 Replies
Mar 11, 2010
What's happening is when windows authentication/authorization fails the user get's a login prompt in IE6, IE7 and FireFox. Only when user clicks Cancel button in login prompt they are getting to 401 error page. What I am trying to achieve is to automatically redirect the user to a custom error page when getting 401 error instead of getting login prompt. Is this possible to suppress the login prompt in this scenario or is it this way by design?Here is my setup:I have windows integrated authentication configured in asp.net 2.0 web app.
[Code]....
In IIS I have website Directory Security configured to use Integrated Windows Authentication and disabled Anonymous Authentication
View 3 Replies
Nov 2, 2010
In my masterpage application i have "Integrated windows authentication" enabled and it works fine for Active Directory Users. but i have created some users in my aspnetdb and i want few users to login and use my application. But for created users in aspnetdb i can getting "windows login screen". means when users not on active directory try to access application instead of getting login page, they get windows auth login popup.
View 1 Replies
Jan 27, 2011
I've set up an ASP.NET MVC application for my company's Intranet that grabs the user's NT creds via System.Web.HttpContext.User and checks against its own database to perform authentication/authorization.This works just fine on my local machine, and I assume it will also work once deployed to the production server, but the development server is on a different domain than the users. While trying to test the app, Iget prompted for a username and password, which isn't supposed to happen. Worse, entering my login creds still doesn't work. I'm deploying a MVC 2 application to an IIS 6 server.The steps I read to take to get Integrated Windows Authentication to work included putting these lines in my Web.config file:
[Code]....
Then, on IIS in Directory Security uncheck the checkbox that allows anonymous authentication, and make certain that only Windows authentication is checked in the access methods section. I've done these things, but since I'm dealing with cross-domain authentication, it's dead in the water. I tried a Google search, and I'll continue with this, but I haven't found anything yet. I'm not incredibly savy when it comes to domain issues, so I might have seen a possible solution and not recognized it.
View 5 Replies
Jul 26, 2010
I have an intranet set up with IIS and it is working fine with windows integrated autehntication. However I have some permissions set and when certain users do not have access they get prompted for their login and I don't want this. I want it to go straight to the access denied page.
I read that "In integrated Windows authentication, the browser tries to use the current user's credentials from a domain logon, and if this attempt is unsuccessful, the user is prompted to enter a user name and password. "
So I understand this is supposed to happen but I was wondering if there was anyway to not have it prompt for a username and password if the first attemp is unsuccessful.
View 2 Replies
Mar 29, 2010
I am using a custom error page in IIS 6:<customErrors redirectMode="ResponseRedirect" mode="On" defaultRedirect="Error2.aspx"/>I want to disable authentication for the custom error page because the error being raised is related to an authentication module and I don't want to get into an infinite loop and I want to display a clean error page to the user. I have been trying the following configuration to do that.
<location path="Error2.aspx">
<system.web>
<authentication mode="None"/>
[code]...
View 3 Replies
Mar 29, 2011
My web application need to list the network share information. The return code is '5' after I call NetShareEnum[Netapi32.dll] in windows integrated authentication.
I found that currently I am using Kerberos protocol to authenticate the access users and the token is grenerated with [TokenImpersonationLevel.Impersonation].
Who know how to resolve this problem? Is there any way to get a token with [TokenImpersonationLevel.Delegation] in Kerberos? BTW, I am sure about that the access user has the Access privilege to list the network share in target server.
View 1 Replies
May 31, 2010
I am trying to force to show to the Logon popup when the session is timeout in Integrated Windows Authentication Enabled website. The session_timeout is firing during the session timeout, but the User.Identity.IsAuthenticated is true. How force to use the Windows Logon Screen when the session is timeout.
View 4 Replies
Nov 10, 2010
I have three asp.net web applications
,Second and Third applications are accessed throught the first,So Authentication (form authentication) is happening from the first application only , all are deployed on same IIS with seperate virtual directory
Like
1.Localhost/EmpMananger
1. Localhost/Hr
2.Localhost/Payroll
, I used the same Entires in both <machineKey> and
<forms> Elements in webconfig file of all applications,
Applications are working fine and Page.User.Identity are available in all applications but once loginUrl and defaultUrl entry is changed to actual name other than localhost
Eg: localhost/EmpManager/default.aspx To myserver/EmpManger/default.aspx
the authentication ticket is not available in second and third applicaiton
View 4 Replies
May 20, 2010
I have this tutorial on Single Sign On with forms authentication.The following link:
[URL]
I did item number 1 which is "SSO for parent and child application in the virtual sub-directory" and it works fine BUT I can't seem to stay logged in because each time I leave and reenter the application I get redirected to the login page.
Is this an inherent feature of forms authentication?
What happened to authorized cookie generated by forms authentication?
While waiting for responses, I will look for answers.
View 5 Replies
Feb 17, 2010
We have intranet based web application in ASP.Net, needs to be configure for single sign on authentication at client place.
Our client has existing intranet based web site in classic ASP. After successful login to this site in asp, employee will have a link to access our web portal without entering any credentials again. Please note that both sites are having differnet virtual
directories or different domains.
Is there any way to achieve this sinlge sign on authentication than LDAP or Cokie based authentication.
Does Microsoft 3.5 provides some enterprise service to acheive the same?
View 5 Replies
Nov 8, 2010
We are upgrading the asp.net 2.0 web application to asp.net 4.0. The application contain three main modules (sub application) like End User, Franchise and Admin with separate web.config, asp.net form Authentication, login page and running with single domain. the URL like,mydomain.com/login.aspxmydomain.com/franchise/login.aspxmydomain.com/admin/login.aspx In asp.net 2.0, working fine with 3 sub applications with separate form authentication under a single domain name and also we can working with all threes in same time. After the up gradation process (ASP.NET 2.0 to 4.0),We didn't run all three applications in same times and also form authentication crossed.
View 2 Replies
Jul 8, 2010
I have a web application that requires two separate authentication and authorization.
In the root webconfig i configure the security for authenticating and authorizing public users
I also need authentication and authorization for the back end. That is the administrator who will manage the web application.
For this i have a subdirectory "admin" that will contain all the functionality for the back end. In the "admin" subdirectory i have a second web.config and i tried to add all the security for the administrator but it does not let me
Is it possible to have to separate authorization and authentication for a single web application. All the details will be save in microsoft's sql tables generate (for example aspnet... tables)
View 3 Replies
Jun 10, 2010
I've had no problems implementing CAS however I have hit an issue with its timeout. It appears my Uni has the timeout set to about 15 minutes. Some forms (specifically ones for our HR department) take a lot longer than 15 minutes to fill out. The result being that when they click the Save/Submit/whatever button, CAS refreshes its login, sends them back to the same page, and resets the page to default (since it's essentially reaccessing it).
Is there any easy way to force my SSO to refresh at set intervals? I tried to use another page (embedded in an iframe that I added to all .Master pages) whose page load contained:
[Code]....
View 1 Replies
May 13, 2010
We have an ASP.NET web application which uses integrated windows authentication. It is accessed by users from two domains, A and B. A is the primary domain and B is an older domain which is going away. Web application is authenticating users using a group policy which only exists in domain A. Every user in domain B has an account in domain A. The application lives in domain A. There was no trust between the domains. So users from domain A would get silently authenticated and logged into the site. Users from domain B didn't get authenticated automatically and were prompted with the IE popup, to which they authenticated using their domain A credentials and everything worked. Now somebody has set up a trust between the domains and users from domain B get authenticated silently to IIS, and then their login fails (no group policy). So the question is:
can I either programmatically or in IIS configuration make it so that users from domain B still get prompted even though there is trust between the domains? Is there a way to tell the server where IIS is running to ignore the trust relationship maybe?
View 1 Replies
Dec 7, 2010
Will I be able to access a Asp.net website on IIS 7 with integrated windows authentication enabled from outside the domain?
View 1 Replies
Apr 6, 2010
We use Sharepoint to control our websites. We build the sites, then load them into the sharepoint server. My question is if I use windows authentication, how can I get my role security in my web config file to coencide with the asp.net controls that use the Forms authentication. Is there a differenence? Our security uses a session variable for security but there is no where to set up their permissions except in active directory. I hope this makes sense because I would like to implement the LoginView with Role groups but how can I give them the role="administrator"? Do I have to go into active directory and give them these permissions(would take awhile due to the size of the company)? Or do I have to set up priveladges in the web.config file for each user(difficult I think)?
View 5 Replies
Feb 9, 2011
Is there any way to change the content of a Windows Integrated authentication dialogue box?
View 1 Replies
Feb 9, 2011
I have just started building an asp.net web service with visual studio 2005. However whenever i try and run the site i get this message, saying "debugging failed because integrated windows authentication is not enabled". I am at a loss of how to correct this problem.
View 1 Replies
Mar 23, 2011
I have a .NET 3.5 application running under IIS 7 on Windows 2003 server and cannot get integrated windows authentication working properly as I continue to get prompted for a login. I have set Windows Authentication to enabled in IIS with all other security types
disabled and my application web.config file authentication/authorization is set up as:
<system.web>
<compilation debug="true" strict="false" explicit="true" targetFramework="3.5" />
<authenticationmode="Windows"/>
<authorization>
<deny users = "?" />
</authorization>
</system.web>
With this setup, I'm expecting behind the scene verification of the Windows user to allow access and deny anonymous users. However, what I'm getting is a Windows login pop-up when I try to access the site. I have been troubleshooting this issue for a few days now and cannot figure out the problem. Based on posts with similar problems, I confirmed my URL does not include any periods, double checked that my IE settings are set to Enable Integrated Windows Authentication, and also added my URL to my intranet sites, but still getting the pop-up. To troubleshoot it further, I enabled Anonymous Authentication in IIS and modified my web.config file to which lets me right in and then added Response.Write(System.Security.Principal.WindowsIdentifity.getcurrent().user.name.toString()) to try to see what user is being used in the authentication. The result I'm getting is IIS APPPOOLmyapp which is obviously the IIS application pool for my application.
I'm still using only windows authentication but don't get the pop-up and the windows authentication is performed against the actual Windows user. Just noticed that when the login fails and the Windows login prompt displays again, it is showing the username that attempted to login as "SERVERNAME""USERNAME" which led me to believe it was trying to validate the user against the server vs. the domain. To confirm this, I created a local user account directly on the app server with the same username and password as the network domain user and tried to login again. The result was that I received the login prompt again but when I entered the username and password this time, I was able to successfully login. The network user and app server are on the same domain so really not sure why IIS authentication is pointing to the local app server accounts and not to the domain accounts. I realize this is an IIS question at this point so posting on forums.iis.net as well but anyone may have since have been troubleshooting this for days.
View 1 Replies
Mar 22, 2010
I am working on an application that uses windows authentication. Within this application, we give the user the ability to change their password. The user can change the password just fine. However, after they change their password, that is when things get weird. Sometimes they can navigate through the application just fine. Other times, they click on a link and are immediately prompted to supply credentials. Occasionly they can click on a link but upon a second click they are prompted to supply credentials. Does the browser keep a token to the original credentials and use this when they request the next page? If this is the case, why can i continue using the site sometimes? Can I change the password and then assign that token to the request?
View 1 Replies
Feb 16, 2011
I have an silverlight application configured with windows integrated security. I would like to emulate the "Sign in as different user" functionality I would like to give the user, the option to click a button and show the windows authentication login window, so that the user can enter the "User name" and "Password" again using another domain account. (btw i found this question on another site but with no answers, I need the same thing so i copy/pasted a bit)
View 1 Replies
Jul 1, 2013
So we're building this website and we've decided to use forms security. We've added users and roles and put code in to control the display of certain functionality based upon User roles. It's all working great except for one thing.
Developers don't like to login to the website every time they want to test a page. So they do things like add a line to web.config like <allow users="*" /> right below <authorization >. This gets them past security, but then we get errors when we check User.IsInRole.
I know this can't be a new problem. How do development teams seemlessly turn forms authentication on and off while doing development?
View 5 Replies
Nov 19, 2010
I have identity impersonate = true in the Web.config file. I have integrated security = true in the DB connection string in the Web.config file.Before identity impersonate was true,users were able to access the DB through the web service account (seemingly).Now I get an error which says " Login failed for ... " because I am aware there is no specific account for that user in the permissions for that DB instance.I needed to set identity impersonate = true because the web service does not have access to the Active Directory,which I need to retrieve certain user information.
My question is,does identity impersonate = true override the integrated security and attempt to user the authenticated user's account to connect to the DB? Is there a simple way to prevent this in the Web.config itself?If not,would programatically impersonating the user within the Active Directory query functions and setting identity impersonate = false do the trick here?
View 2 Replies