Setting Up Gridview For Editing And Updating Field SQLDataAdapter
Apr 26, 2010
I have a gridview, and I was trying to use SQLAdapter for the first time. I have it set up but I want the user to enter a Date in the last field of the Gridview and be able to update it. I was looking up examples, and I cannot get it to properly update. The field I want to be able to update is the "TADateUpdate" I have gotten it to show the texbox fields to edit, but I can't figure out a method to update properly.
I would prefer that all middle tier methods that are used by GridViews be in the form that allows them to be used by ObjectDataSources...
<DataObjectMethod(DataObjectMethodType.Delete)> _
However, I am working on a project that I did not create. So, I was wondering if there is a way to use all the cool built-in editing functionality of a GridView without setting a DataSource? In other words, I am binding the datasource in the code behind (this works), and I have the following in my GridView...
And in the RowUpdating event (after the update button is clicked), I would like to call a stored proc to update a table and then use this kludge to get the GridView out of "edit" mode...
i have asp.net chart control and gridview control in updatepanle my issue is when i click on edit link in gridview my chart control is not displaying but when i refresh my page iam to see it why is so??
I have a database linked to a calendar. I had a peice of code that retrieved dates from a database and populated the calendar. I wanted to tidy up my code using stored procedures (they seem neater & i assume there's a benefit somewhere). so i came up with this, however it's not working. The calendar displays, but it's not being populated with the database entries. The SqlCommand & SqlParameter I have working elsewhere in my code; as with the SqlDataAdapter (which also worked before i tried to conver to a storedprocedure!) but combining these three (SqlCommand, SqlParameter & SqlDataAdapter) seem to be causing me problems.It's probably something stupid but if someone could take a look and point me in the right direction,
I hav a gridview in which i display the project name,created date,Start time ,end time ,total hours along with the task id field which is visible=false.
My starttime and endtime format is 2010-10-13 03:00:00,but i want to display these two fields in dropdownlist ie.,only i want to display the HH:MM:SS in dropdown so that when the user changes the time it should be automatically be reflected in the total hours(6:0) field after updating.pls tell me what i have to do to bring the Hours ,minutes and seconds in dropdownlist into the cells of gridview with the value in database ,how to write the code.
I was able to get the code below to give me the value I want from my SQL table however it has to display it in a gridview so I assume that something in the code acutally makes the result a data source rather than a string value.
I have a gridview where I am using the update. I have converted the label into a templatefield and added a dropdownlist which is getting polulated in the Rowdatabound event. When I test the update i get an error
Cannot insert the value NULL into column 'StartTime', table 'HTC.dbo.EventDates'; column does not allow nulls. UPDATE fails.The statement has been terminated. so I am ussuming its still trying to update from the label rather than using the dropdownlist. here is my code:
I have a Modified Date and Modified By column in my gridview and I want them to be updated with the current date and current user any time a user updates the row.
I converted my columns to template fields and the textboxes in the edititemtemplate are bound to my sql data columns "ModifiedDate" and "ModifiedBy"
Then I added the attached code in my RowUpdating event.
When I test the code and click the Update link on my gridview I don't get an error but the values don't update either. I put a breakpoint on the code and when I hover over "ModifiedDateLabel.Text" I see the old value of the field so I know I'm accessing the control correctly.
The original Item Template was Enabled ="false" I changed this so that you did not have to set the row to a state of edit in order to just select a row. I enabled it so that you could "select" any row with out putting it in a state of edit. the only value changing is if its selected or not. What i am trying to do is use the Data Source Update method to update the bit in the database based on the check box. Currently Update() returns 0. I believe this is because the row/feild is not marked as changed so the Data Source does not see it as something that needs to be updated.
What I am hoping for out of this is post is a way that the rows whom check value has changed to be marked as changed/edited so that the data source will update the database with the values of the check boxes. If all rows are updated this is acceptable as well. I know this is a super simple solution but i have been out of the .NET for a little bit.
I have a gridview and sqldatasource in a form. My sqldatasource has select,delete and update command. The delete command is working but the update doest not work when I click the update command field.
I created a gridview that is bound with an SQL datasource - I added a gridview button column. I need to update/insert 'Y' on a specific cell in the row when I press the button
This is my gridview code
[code]....
The button column I have says delete on it but it shouldn't really delete it - Once I press the button it puts a 'Y' on a column that is filtered out by my sql statement in the sql datasource
I have loaded up a gridview object with data. I have turned on Edit on the grid. It lets me edit the data, but I also want to put some code to check for correct data in each field. I tried to assign a requiredfieldvalitor, comparevaliditor but they don't work. Is there an event I can capture to fire up some code before the grid sves my data?
I have a Gridview set up so when a user clicks the various buttons it sorts the results. I have a couple problems. Right now the way i have the viewStates set up, it is only working when the buttons are clicked twice. I Was also wondering how to set up the viewstates so it binds properly when the editing and updating. I have read up on ViewStates and I am still a bit confused.
I have a gridview based on a sqldatasource that has some colums from which two colums showing the data of two fields: field1 and field2. field1 is an ID which should not be updated and therefore it is readonly=true. The sql-query from the sqldatasource is:
SelectCommand="SELECT field1, field2 from anyView"
What I want is, that when a row is updated, then the value from field1 should be copied to field2 The update-query is:
UpdateCommand="UPDATE myTable SET field2=@field2 WHERE field1=@field1"
My idea was, that the @field2 paramter gets the value from the query string out of field1:
But this does not work. Is there an easy way to copy the data from field1 to field2 when updating the row? In addition, is this possible, even if field2 ist not shown in the gridview (i.e. field2 is selected in the query but is not a field in the gridview but should be updated with value of field1).
I am editing a DataGridView and i have a textbox on the same page.I have setup textbox as rerquired field.when i edit my grid view it shows 2 buttons, cancel and update.when i press update button it shows textbox must has a value, altough textbox is not the part of the grid but available on the same page.I want when i press any button on the page, it should show field is required but when i press update button of the grid it should bypass the required field validation.
trying to merge two sets of data from a SqlDataAdapter and an OleDataAdapter and then populate a gridview on a button click. If I run just the SqldataAdapter on its own the grid populates as expected. This also applies to the OleDataAdapter. The problem arises when I try to merge the two. I get an empty table, hence dt3 is not populating. The code i'm using is below.Does anyone know why this doesn't work?
I'm trying to set the ImageUrl property after I've uploaded an image so that I can display the newly uploaded image, but for some reason it's not working.
If I navigate from the record I've just updated and then return back to that same record, the image then displays. It just doesn't display right after I've updated it. Basically what I'm doing is this:
Sub FormView1_OnItemUpdated(Sender As Object, e As FormViewUpdatedEventArgs)
Dim MyImage As Image MyImage = FormView1.FindControl("Image1") MyImage.ImageUrl = "image1.jpg"[code]....
I've left out the path intentionally because I'm pretty certain that the path I'm giving is correct... again, if I navigate away from the record and then return to it, the image displays. In addition, when I view the "Page Source" to view the resulting html, the src property of the image tag is blank . So, it's not a path issue... the issue is that its not setting the src at all which is why the image is not displaying.
how do I update a field from code like inserting a date. i have something like below. i want to insert the date when the record is updated or edited, but it does not work what is the correct way to do this in mvc
I inherited some JavaScript that I was told to integrate into our ASP.NET site. I thought this would be straightforward but it's turning out to be a bit of a challenge.
The goal is to get the value from this HTML control into ASP.NET, however this control itself is being dynamically generated by another chunk of javascript, so I can't just change this to an asp.net control. My solution was to add the onchange="updateQuestion();" method, this JS will take these SELECT tags and place the values into an ASP.NET control:
function updateSecQ() { var sQuestion = document.getElementById('<%=sQuestion.ClientID%>'); sQuestion.Value = ""; var questions = document.getElementsByName('Question'); for (question in questions) { if (questions[question].value != null) sQuestion.Value += questions[question].value + ","; } alert(sQuestion.Value); }
As you can see, that's looking to update an ASP.NET control:
i am trying to set UniqueID for a hidden field control .its throwing me error The 'UniqueID' property is read-only and cannot be set. How to solve this issue ??my code
