I'm writing a simple web site using codebehind for each page, however using the "codefile" directive, not "codebehind" as such, because I'm not precompiling. I'm just using a text editor to edit the aspx and codebehind files. Problem is, every time I make a change to the code or the aspx file, and refresh the page in the browser, it takes a 2 or 3 seconds to come up the first time, like it's doing an on-demand initial compile. I assume that's what it's doing, as after the initial load, the page refreshes without any delay at all.
This behaviour is quite frustrating when making small changes to the html or code. I'm coming from classic ASP, where you could edit-refresh-edit-refresh etc. all day without your "stride" being broken by waiting for a "compile", you know? So I'd love to know if there's a setting which prevents this initial delay. When I want to deploy, I can do a compile or something, but while making lots of small edits, I just need the page to run without that initial delay.
Over the last week I've been investigating an issue for one of our clients whereby the initial page load following a deployment of their website takes around 1 minute, resulting in unacceptable downtime for end users. This was happening not only for code deplyments (bin dll's and .config files) but also if there were large numbers of .aspx pages updated. For code deployments it's not an issue, but for aspx updates it is; in this particular scenario, we are making use of a 3rd party content management system (RedDot from OpenText) in which every page of the site is published out as a distinct .aspx page. This means that for this website there's somewhere in the region of 2,400 separate .aspx pages. I realise this isn't an ideal situation but we're working within the constraints of the CMS, and we managed to correlate the instances where the site was unresponsive with App pool restarts, which also corresponded to publications of of .aspx pages.
I found an article by Tess Ferandez [URL] which describes all the reasons why the app pool may restart, and it does seem that if more than 15 .aspx pages are changed then the app pool will recycle and the pages will be re-compiled. Another msdn article [URL] then gave me a few pointers on how to start addressing this problem, and for the moment I've set a flag on the compilation options to prevent batch compilation:
<compilation batch="false">
This means that the initial page load now takes around 6 seconds instead of 1 minute, which is a great improvement. However, I also used the "Compilations Total" performance counter to investigate the number of pages that have been compiled by ASP.NET for my site and was quite surprised that the total number of pages that get compiled peaks at 44, which is odd given that there are 2,400 aspx pages in the site. If the batch flag is set to false, the counter slowly increments by 1 page at a time as you click around on the site; if batch mode is true, the initial compilation takes the number straight to 44 over the course of ~60 seconds. What I'm really struggling to understand is why all 2,400 pages aren't compiled. Does anyone have any inside info on what might be going on as all the documentation I've read seems to indicate that all of the pages should be compiled and this counter should be much higher.
I have a simple web application that loads very slow the very first time after i deploy it. I am using ASP.NET 3.5 SP1 / VS 2008 / Linq / Web forms to load the default.aspx home page. It is a very light page with nothing too fancy.Now to debug this load issue, I logged all the events in the global file and got the following log text:
Now my question is, between the Application_AuthenticateRequest and Session_Start functions, there is generally around 10 - 15 seconds - which i believe seems to be the problem.The thing, I am unsure why this is slow between these two functions.I am not using any forms authentication.Also, I am not doing anything fancy in the global file besides setting a session variable.
I have this simple code in my page, I have a long page, if the client use this button then it shall reload the page and display the page from the beginning. I wish to be reload the page and display from the last position.
I posted a similar question previously, but none of the answers worked and I've been scouring all over the web trying to find a solution. My situation, I have a Edit Window webform with a dropdownlist (Note: to avoid confusion, I'm using Telerik extensions only to decorate the webform):
And in the code behind, I'm setting the datasource for the dropdownlist and using a function to query the DB for the name of the value I want to set as the selected value when the page loads initially: Partial Class EditFormVB Inherits System.Web.UI.Page
Public Shared category_Name As String = "" Dim ddlDataSource As New SqlDataSource Protected Sub Page_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Init DetailsView1.DefaultMode = DetailsViewMode.Edit End Sub Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load Me.Page.Title = "Editing record" ''Setup DropDownList SqlDataSource ddlDataSource.ID = "ReqCategoryData" Page.Controls.Add(ddlDataSource) ddlDataSource.ConnectionString = ConfigurationManager.ConnectionStrings("TTPRODReportsQuery").ConnectionString ddlDataSource.SelectCommand = "SELECT TS_NAME AS ReqCategory FROM dbo.TS_SELECTIONS WHERE (TS_FLDID = 5299 AND TS_STATUS = 0) ORDER BY TS_NAME" Dim args As New DataSourceSelectArguments ddlDataSource.Select(args) ''Set max length of Title field to 70 characters Dim dvrTest As DetailsViewRowCollection = DetailsView1.Rows Dim TitleTB As TextBox = dvrTest.Item(0).Cells(1).Controls(0) TitleTB.Attributes.Add("onkeydown", "isMaxLen(this)") TitleTB.Attributes.Add("maxlength", "70") Dim myDDL As DropDownList = DetailsView1.FindControl("reqCategoryDropDown") ''Perform dropdown list population operations If Page.IsPostBack = False Then Dim ticket_ID As String = getDataKey(DetailsView1) ''Fetch Category ID Dim sqlText As String = "SELECT TS_REQCATEGORY FROM USR_ITFAC WHERE (TS_ID = " + ticket_ID + ") " Dim reqDataReader As SqlDataReader = GetDataReader(sqlText) reqDataReader.Read() Dim category_ID As String = reqDataReader(0) ''Fetch Category name using the categoryID and set as selected value in dropdown list sqlText = "SELECT TS_NAME FROM TS_SELECTIONS WHERE (TS_ID = " + category_ID + ") " reqDataReader = GetDataReader(sqlText) reqDataReader.Read() category_Name = reqDataReader(0) myDDL.DataBind() myDDL.Selectedvalue = category_Name //<--this value gets set only when debugging, End If End Sub Private Function GetDataReader(ByVal sqlText As String) As SqlDataReader Dim dr As SqlDataReader Dim sqlConn As SqlConnection = New SqlConnection(ConfigurationManager.ConnectionStrings("TTPRODReportsQuery").ConnectionString) sqlConn.Open() Dim sqlCmd As SqlCommand = New SqlCommand(sqlText, sqlConn) dr = sqlCmd.ExecuteReader(System.Data.CommandBehavior.CloseConnection) Return dr End Function End Class
The dropdownlist does get populated appropriately, however when I attempt to set the value, it doesn't reflect when the page loads; the dropdownlist just gets populated and no value is set to selected in the markup, so the first value is shown by default. The odd thing is that when I'm debugging, the value appears to get set when I step through the function, it's as if the selectedvalue is getting reset as soon as the function exits and proceeds to load the page.
SOLUTION: Had to add a separate function that is called onLoad from the DropDownList after the after Page_Load is done executing. Still unresolved is why the the DropDownList rebinds after the Page_Load.
IN HTML: <asp:DropDownList DataSourceID="ReqCategoryData" DataTextField="ReqCategory" DataValueField="ReqCategory" ID="reqCategoryDropDown" runat="server" AutoPostBack="true" OnLoad="DDL_DataBound"> IN CODE-BEHIND Public Shared category_Name As String = "" Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load Me.Page.Title = "Editing record" ''Setup DropDownList SqlDataSource ddlDataSource.ID = "ReqCategoryData" Page.Controls.Add(ddlDataSource) ddlDataSource.ConnectionString = ConfigurationManager.ConnectionStrings("TTPRODReportsQuery").ConnectionString ddlDataSource.SelectCommand = "SELECT TS_NAME AS ReqCategory FROM dbo.TS_SELECTIONS WHERE (TS_FLDID = 5299 AND TS_STATUS = 0) ORDER BY TS_NAME" Dim args As New DataSourceSelectArguments ddlDataSource.Select(args) ''Set max length of Title field to 70 characters Dim dvrTest As DetailsViewRowCollection = DetailsView1.Rows Dim TitleTB As TextBox = dvrTest.Item(0).Cells(1).Controls(0) TitleTB.Attributes.Add("onkeydown", "isMaxLen(this)") TitleTB.Attributes.Add("maxlength", "70") Dim myDDL As DropDownList = DetailsView1.FindControl("reqCategoryDropDown") ''Perform dropdown list population operations If Page.IsPostBack = False Then Dim ticket_ID As String = getDataKey(DetailsView1) ''Fetch Category ID Dim sqlText As String = "SELECT TS_REQCATEGORY FROM USR_ITFAC WHERE (TS_ID = " + ticket_ID + ") " Dim reqDataReader As SqlDataReader = GetDataReader(sqlText) reqDataReader.Read() Dim category_ID As String = reqDataReader(0) ''Fetch Category name using the categoryID and set as selected value in dropdown list sqlText = "SELECT TS_NAME FROM TS_SELECTIONS WHERE (TS_ID = " + category_ID + ") " reqDataReader = GetDataReader(sqlText) reqDataReader.Read() category_Name = reqDataReader(0) myDDL.DataBind() End If End Sub Protected Sub DDL_DataBound(ByVal sender As Object, ByVal e As System.EventArgs) If Page.IsPostBack = False Then Dim myDDL As DropDownList = DetailsView1.FindControl("reqCategoryDropDown") myDDL.Items.FindByValue(category_Name).Selected = True End If End Sub
about how many are using jQuery to create controls in the DOM after the initial page load.Curious also about any conventions for naming DOM objects in relation to database objects.Seems you could almost render the entire page using jQuery..Does that mean I am only using ASP.Net for the fact that my page methods will run in IIS on the web server?
I've searched around a lot, and honed this problem down to this case: I'm using the PRG pattern, pragmatically I'm using the same DTO for my post/get actions. It looks like when I have the dto with the data annotation attributes in the get action parameter list, the validation is always displaying errors, every time on initial page load. In some cases this could be desired behavior if you put asterisks in the error message, but how do I get rid of it?
I have an application that initially display 4 grid views at page load. This process takes 50-60 seconds and I would like to change the process to display the web page, show message like "Data being loaded, please wait..." and then spin off a thread that fills the various grid view. When this is done I would programatically like to do a post back to show the result. Not sure if this is possible? I tried something like this:
I am not sure what I am doing wrong in how I set up validation on my models and viewmodels. For some reason on several of my views that contain a validation summary, it appears empty on initial load of the page. On some other pages it appears correctly when the form's data is posted and it does not appear on initial load, this is the way that I would expect it to work.
On the views where this is occuring, my viewmodels are somewhat more complex in that they contain another complex type that I am passing around that has it's own set of DataAnnotation Validation properties, but I have called the validation summary like this; Html.ValidationSummary(true) so that those properties are not validated.
I a formview object. I have created an edit temple and an empty template Whehn there is data in the table nor probem When my table is empty i got the empty template to display when I click insert I get the error " Form must be in insert mode" How can I tell if there is no data on the page load so I can maybe do this:
I've developed a web page Client.aspx that is used for editing a client. This application has been deployed and I made sure that debug='false'.Upon selecting a client from the dropdownlist, his/her information is retrieved for editing. This retrieving process is very slow( about 9 seconds).Except this DropDownList, all the other controls on this page are within the Update Panel. There are 2-3 other Update Panels within the main Update Panel.
When a client is selected from the DropDownList, the Client_ID (DataValueField) is used to retrive the informationSELECT * FROM CLIENTS WHERE Client_ID=1576 This method returns a dataset.In the calling method I'm assigning these values to the respective fields.Some JavaScript is used for validating Phone#.I also have a RadioButtonList on this page. When one of the ListItem is selected I need to disable a TextBox. Even this process is taking much time than expected.
Every now and then (always after a long period of idle-time, e.g. overnight) when I access a site built using asp.net - it takes around 15 seconds to load the page (15 seconds before I see any progress whatsoever, then the page comes up fast).Further pages on that site, or refreshes, are quick as usual - they are also fast on other machines, only the first one seems to take the 'hit'.
Page tracing never through anything up (whole cycle was a fraction of a second) So my question is where else should I be looking? Perhaps IIS? Or could it still be my asp.net app and I'm just looking in the wrong place (the trace) for clues?As I don't have much control over the IIS server, anything I can check through asp.net would be more helpful, before I go ask that particular admin.
The first time that my page loads (this is after it has been deployed), it is terribly slow.
My guess is that it is still compiling dynamically, and not precompiling.When I publish through VS2008 I have "Allow this precompiled site to be updatable" unchecked and "Use fixed naming and single page assemblies" checked.Could I be missing something in my web.config file?
I can post the URL of the site if you would like to view it, but it takes 10+ seconds to load upon first visiting, and then less than 1 second to navigate the site.
Currently the page load slow. I am thinking of using JQuery load and render List<A> and List<B> separately and asynchronously. Can I still use MVVM pattern? Or I had to create to controller methods returning List<A> and List<B> separately?]
When we include Javascript files in our aspx files. either we write all the Javascript code in the Head section of aspx or we link to an external Javascript file.
So when the clinet makes a call to that page. Does that mean that all the Javascript will be loaded on the client side?
If that is the case then does not that mean that it will slow down the loading of page as all the Javascript has to be loaded on the client machine?
I have an application where different users can log in via a single portal login. When they log in, if they belong to more than 1 company they have to select the company they belong to. The theme will change if there is a custom theme for that company. Each page my application has inherits a "CustomPage" class. Here is the code for the custom page:
When the customer belongs to more than 1 company, and they select the company they belong to, the theme loads just fine. So, the problem I am having is this: If they belong to just 1 company, the company is automatically selected but the theme does not load right away. However, if I refresh the page, the theme loads just fine. Even the default theme will not load. The page has no css at all until I refresh.
I even view source and look for my css names and they are not there. I refresh and do the same thing, and they are there. I am not using forms authentication and the default theme in the web config is "Default"
I've stumbled across a strange problem with the AsyncFileUpload control: if the control doesn't exist on the initial load, the UploadedComplete event does not fire. For example, the following code works just fine:
[Code]....
But as soon as the code is wrapped in an if (IsPostBack) condition as shown below, FileUploaded no longer fires, even though the code is otherwise identical:
[Code]....
Would anyone be able to shed some light on why this is happening?
I have a hybrid ASP.Net web forms/MVC app. On one of the MVC "pages"/views, I have it render a bunch of dates using the ToShortDateString() and ToLongDateString(). These work correctly most of the time, but the first time I load the view after compiling the app, they are formatted incorrectly.
I traced this down and checked the current thread's culture. For 99% of the time it's en-US, but on the first load of the MVC view after compiling it is set to en-GB. If I reload the page immediately after that, it's back to en-US.
I have tried setting the culture and uiculture in the web.config file to en-US to force it to be correct, but no luck.
For some reason my RadComboBox "EmptyMessage" is not showing on the initial load of the page but it does after I focus and blur out of the control. How can I force my "EmptyMessage" to show by default?
On my Page_Load command for a page, I have a couple of tests that are performed before the screen is displayed with an alert box displaying if the user cannot access the screen. If Not Page.IsPostBack Then
I have several divs on an asp page. All of my divs are runat="server". On the initial load of my page I set all the divs visible property to false because I dont want them to appear on the first show. Then, I have a drop down list raising postback events.
On the selected index changed event I am setting the visible property of my divs to true to make them appear on the page. However this does not work.
I discovered that, on the initial load non of my divs are added to the page's html content. So, on a postback event non existing divs can not be made to appear. If all the divs would set to visible = true on the initial load, postback event would work just expected.
Could any one tell me a way to hide divs on the initial load and make them appear on a postback event?
So i'm new to AJAX and just installed the AJAX toolkit.
When i have tried to used any of the object there my page are really slow, it like the server is forever to compile the site and when that is done the browser shows it in a flash.
You can see here :
[URL]
This is not a problem when using only ASP.NET.
When i debug in VS2008 i can see that is looking for some random files when compiling like C:AjaxBuildAjaxServerAjaxControlToolkitToolkitScriptManagerToolkitScriptManager.cs and alot of other stuff, it goes through alot of setting there and i think that is the hold up, why it's so slow.
I have Sp1 installed, running Windows 7 64bit.
These pages are very small and standard. I basicly drag a toolkitscriptmanager, htmleditor, textbox and two buttons to the form. There isnt more.
This is the code for the first page :
[Code]....
The host has AJAX support and has installed SP1 for .NET.
I have a situation where I need to have close to 30 drop down lists on one form. The user also wants the autocomplete functionality. I decided to use the ASP.NET AJAX control. So that the page will load faster I hide them until they are needed. But, as more and more become visible the postback time is getting longer and longer.
I know this can be fixed, but I'm not sure how. Can anyone give me any advice, point me to some articles? Do you have a suggestion for another method of doing what I need? Maybe, I shouldn't even be using ComboBoxes for this?
