Web Forms :: Hide Divs On The Initial Load And Make Them Appear On A Postback Event?
Dec 1, 2010
I have several divs on an asp page. All of my divs are runat="server". On the initial load of my page I set all the divs visible property to false because I dont want them to appear on the first show. Then, I have a drop down list raising postback events.
On the selected index changed event I am setting the visible property of my divs to true to make them appear on the page. However this does not work.
I discovered that, on the initial load non of my divs are added to the page's html content. So, on a postback event non existing divs can not be made to appear. If all the divs would set to visible = true on the initial load, postback event would work just expected.
Could any one tell me a way to hide divs on the initial load and make them appear on a postback event?
View 3 Replies
Similar Messages:
Jan 31, 2011
I was just after some help to put the following code into a loop. I have 6 div's with id's ImgDetails1 - ImgDetails6 and 6 buttons
with id's 1 - 6
if 1 is pushed it should hide the other divs but ensure div1 is shown. the same applies for every other
div.
I can do this the long way writing logic for each div but I am not the best with js and have failed
at each attempt to put the code in a 1 - 6 loop to hide all divs except the one selected and make sure that is shown.
[Code]....
View 4 Replies
Mar 26, 2012
I have a bunch of divs that are widgets. I am using a custom role provider and I need to hide the divs based on roles. Is it better to add a "runat=server" attribute to the div so that I can hide/unhide in the code behind? Should I hide/unhide on the aspx page or do i use panel controls and hide/unhide in the code behind?
View 1 Replies
May 24, 2013
I have created Dynamic LinkButtons. Each of which has a click event and some particular output, Its working fine this way. E.g.
when i clicked ASPsnippets message is "Hi asp snippet"
when i clicked Google message is ""Hi Google"
But
"Hi asp snippet" is removed when iclick GooglE
View 1 Replies
Jul 24, 2010
am adding control dynamically in button click event in asp .net i have one more button when i clicked the added control is disappeared .
View 5 Replies
Nov 17, 2010
I have a <hr/> on the page and I want to hide it on buttonclick ?
How to do it ?
I tried to capture it within div and give ID to div but in buttonclick event code the intelligsense does not give me the id name for me to use.
What should I do?
View 1 Replies
Jun 24, 2010
is it possible to make a control NOT load Post Data on postback?
View 3 Replies
Oct 29, 2010
I have an ASP.Net GridView, with two columns ("ID" and "name"). The name column is editable via an <asp:TextBox>. What I want to do is have the grid trigger its update event when the user clicks away from an editable cell.
I know I can attach an onBlur event handler to the TextBox to retrieve the value when the user clicks away. However, I don't know how to trigger the GridView's update event programmatically through JavaScript.
View 3 Replies
Jun 17, 2010
I have an application that initially display 4 grid views at page load. This process takes 50-60 seconds and I would like to change the process to display the web page, show message like "Data being loaded, please wait..." and then spin off a thread that fills the various grid view. When this is done I would programatically like to do a post back to show the result. Not sure if this is possible? I tried something like this:
[Code]....
View 1 Replies
Aug 6, 2010
I have alot of code in the page load event as below.
Is it best practice to use (!NotPostBack) and wrap the code in this block or does it depend on the methods etc. I also have code which populates ajax slideshow as well which gets images from database.
[code]....
View 4 Replies
Apr 13, 2010
I a formview object. I have created an edit temple and an empty template Whehn there is data in the table nor probem When my table is empty i got the empty template to display when I click insert I get the error " Form must be in insert mode" How can I tell if there is no data on the page load so I can maybe do this:
formview.f1.defaultmode = fornviewmode.insert
View 5 Replies
Mar 2, 2011
Here is my requirement -
1. I need to load a user control on link click event of a link button during postback of aspx page.
2. On button click event of a save button on that aspx page, I need to read the selected values from that user control on further postback.
If I write the loadcontrol code in link_click event, the control is not recognized at all in the button_click event. When I shift it to page_init and execute only during not postback, the user control loads with default values.
View 1 Replies
Jan 22, 2010
I'm writing a simple web site using codebehind for each page, however using the "codefile" directive, not "codebehind" as such, because I'm not precompiling. I'm just using a text editor to edit the aspx and codebehind files. Problem is, every time I make a change to the code or the aspx file, and refresh the page in the browser, it takes a 2 or 3 seconds to come up the first time, like it's doing an on-demand initial compile. I assume that's what it's doing, as after the initial load, the page refreshes without any delay at all.
This behaviour is quite frustrating when making small changes to the html or code. I'm coming from classic ASP, where you could edit-refresh-edit-refresh etc. all day without your "stride" being broken by waiting for a "compile", you know? So I'd love to know if there's a setting which prevents this initial delay. When I want to deploy, I can do a compile or something, but while making lots of small edits, I just need the page to run without that initial delay.
View 6 Replies
Jun 14, 2010
I have an application where different users can log in via a single portal login. When they log
in, if they belong to more than 1 company they have to select the company they belong to. The theme will change if there is a custom theme for that company. Each page my application has inherits a "CustomPage" class. Here is the code for the custom page:
public class CustomPage : Page
{
protected void Page_PreInit(object sender, EventArgs e)
{
if (Globals.Company != null && Directory.Exists(Page.MapPath("~/App_Themes/" + Globals.Company.CompanyName)))
{
Page.Theme = Globals.Company.CompanyName;
}
else
{
Page.Theme = "Default";
}
}
}
When the customer belongs to more than 1 company, and they select the company they belong to, the theme loads just fine. So, the problem I am having is this: If they belong to just 1 company, the company is automatically selected but the theme does not load right away. However, if I refresh the page, the theme loads just fine. Even the default theme will not load. The page has no css at all until I refresh.
I even view source and look for my css names and they are not there. I refresh and do the same thing, and they are there. I am not using forms authentication and the default theme in the web config is "Default"
<pages theme="Default">
View 1 Replies
Mar 24, 2011
I am using aspnet menu control and i want to hide the item initially on page load and show the item after an event is trigger say button lick event Can any one give me an example?
View 6 Replies
Jun 17, 2010
I have this simple code in my page, I have a long page, if the client use this button then it shall reload the page and display the page from the beginning. I wish to be reload the page and display from the last position.
<asp:RadioButtonList ID="RadioButtonList5" runat="server" AutoPostBack="True"
RepeatDirection="Horizontal">
<asp:ListItem Value="45">Sheet2</asp:ListItem>
</asp:RadioButtonList>
View 1 Replies
Jul 22, 2010
I posted a similar question previously, but none of the answers worked and I've been scouring all over the web trying to find a solution. My situation, I have a Edit Window webform with a dropdownlist (Note: to avoid confusion, I'm using Telerik extensions only to decorate the webform):
<%@ Page Language="VB" CodeFile="EditFormVB.aspx.vb" Inherits="EditFormVB" %>
<%@ Register Namespace="CustomBoundField" TagPrefix="custom" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
<title>Edit Pop-up</title>
</head>
<body class="">
<form id="form1" runat="server">
<div>
<script type="text/javascript">
function CloseAndRebind(args) {
GetRadWindow().BrowserWindow.refreshGrid(args);
GetRadWindow().close();
}
function GetRadWindow() {
var oWindow = null;
if (window.radWindow) oWindow = window.radWindow; //Will work in Moz in all cases, including clasic dialog
else if (window.frameElement.radWindow) oWindow = window.frameElement.radWindow; //IE (and Moz as well)
return oWindow;
}
function CancelEdit() {
GetRadWindow().close();
}
</script>
<asp:ScriptManager ID="ScriptManager2" runat="server" />
<telerik:RadFormDecorator ID="RadFormDecorator1" runat="server" Skin="Vista" DecoratedControls="All" />
<br />
<br />
<asp:DetailsView ID="DetailsView1" DataKeyNames="ID" runat="server" AutoGenerateRows="False"
GridLines="None" DataSourceID="detailsSqlDataSource" Height="50px" Width="125px"
BorderWidth="0" CellPadding="0" CellSpacing="7">
<Fields>
<asp:BoundField DataField="TS_DESCRIPTION" HeaderText="TS_DESCRIPTION" SortExpression="TS_DESCRIPTION" />
<asp:BoundField DataField="TS_TITLE" HeaderText="TS_TITLE" SortExpression="TS_TITLE" />
<asp:CommandField ShowEditButton="True" />
<asp:CommandField ShowInsertButton="True" />
</Fields>
</asp:DetailsView>--%>
<telerik:RadScriptManager ID="RadScriptManager1" runat="server" />
<telerik:RadFormDecorator ID="RadFormDecorator1" runat="server" Skin="Vista" />
<br />
<br />
<asp:DetailsView ID="DetailsView1" runat="server" Height="400px" Width="745px"
AutoGenerateRows="False" DataKeyNames="TS_ID" DataSourceID="SqlDataSource2"
EnableModelValidation="True">
<Fields>
<asp:TemplateField HeaderText="Category">
<EditItemTemplate>
<%--<asp:DropDownList ID="TTCategory" runat="server" DataSourceID="ReqCategoryData" SelectedValue='<%# Bind("TS_NAME") %>' />--%>
<asp:DropDownList DataSourceID="ReqCategoryData" DataTextField="ReqCategory" DataValueField="ReqCategory"
ID="reqCategoryDropDown" runat="server" AppendDataBoundItems="true" AutoPostBack="true" >
</asp:DropDownList>
</EditItemTemplate>
</asp:TemplateField>
<asp:CommandField ButtonType="Button" EditText="Update" ShowEditButton="True"
ShowCancelButton="True">
<ItemStyle HorizontalAlign="Center" />
</asp:CommandField>
</Fields>
</asp:DetailsView>
</div>
</form>
</body>
</html>
And in the code behind, I'm setting the datasource for the dropdownlist and using a function to query the DB for the name of the value I want to set as the selected value when the page loads initially: Partial Class EditFormVB Inherits System.Web.UI.Page
Public Shared category_Name As String = ""
Dim ddlDataSource As New SqlDataSource
Protected Sub Page_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Init
DetailsView1.DefaultMode = DetailsViewMode.Edit
End Sub
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Me.Page.Title = "Editing record"
''Setup DropDownList SqlDataSource
ddlDataSource.ID = "ReqCategoryData"
Page.Controls.Add(ddlDataSource)
ddlDataSource.ConnectionString = ConfigurationManager.ConnectionStrings("TTPRODReportsQuery").ConnectionString
ddlDataSource.SelectCommand = "SELECT TS_NAME AS ReqCategory FROM dbo.TS_SELECTIONS WHERE (TS_FLDID = 5299 AND TS_STATUS = 0) ORDER BY TS_NAME"
Dim args As New DataSourceSelectArguments
ddlDataSource.Select(args)
''Set max length of Title field to 70 characters
Dim dvrTest As DetailsViewRowCollection = DetailsView1.Rows
Dim TitleTB As TextBox = dvrTest.Item(0).Cells(1).Controls(0)
TitleTB.Attributes.Add("onkeydown", "isMaxLen(this)")
TitleTB.Attributes.Add("maxlength", "70")
Dim myDDL As DropDownList = DetailsView1.FindControl("reqCategoryDropDown")
''Perform dropdown list population operations
If Page.IsPostBack = False Then
Dim ticket_ID As String = getDataKey(DetailsView1)
''Fetch Category ID
Dim sqlText As String = "SELECT TS_REQCATEGORY FROM USR_ITFAC WHERE (TS_ID = " + ticket_ID + ") "
Dim reqDataReader As SqlDataReader = GetDataReader(sqlText)
reqDataReader.Read()
Dim category_ID As String = reqDataReader(0)
''Fetch Category name using the categoryID and set as selected value in dropdown list
sqlText = "SELECT TS_NAME FROM TS_SELECTIONS WHERE (TS_ID = " + category_ID + ") "
reqDataReader = GetDataReader(sqlText)
reqDataReader.Read()
category_Name = reqDataReader(0)
myDDL.DataBind()
myDDL.Selectedvalue = category_Name //<--this value gets set only when debugging,
End If
End Sub
Private Function GetDataReader(ByVal sqlText As String) As SqlDataReader
Dim dr As SqlDataReader
Dim sqlConn As SqlConnection = New SqlConnection(ConfigurationManager.ConnectionStrings("TTPRODReportsQuery").ConnectionString)
sqlConn.Open()
Dim sqlCmd As SqlCommand = New SqlCommand(sqlText, sqlConn)
dr = sqlCmd.ExecuteReader(System.Data.CommandBehavior.CloseConnection)
Return dr
End Function
End Class
The dropdownlist does get populated appropriately, however when I attempt to set the value, it doesn't reflect when the page loads; the dropdownlist just gets populated and no value is set to selected in the markup, so the first value is shown by default. The odd thing is that when I'm debugging, the value appears to get set when I step through the function, it's as if the selectedvalue is getting reset as soon as the function exits and proceeds to load the page.
SOLUTION: Had to add a separate function that is called onLoad from the DropDownList after the after Page_Load is done executing. Still unresolved is why the the DropDownList rebinds after the Page_Load.
IN HTML:
<asp:DropDownList DataSourceID="ReqCategoryData" DataTextField="ReqCategory" DataValueField="ReqCategory"
ID="reqCategoryDropDown" runat="server" AutoPostBack="true" OnLoad="DDL_DataBound">
IN CODE-BEHIND
Public Shared category_Name As String = ""
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Me.Page.Title = "Editing record"
''Setup DropDownList SqlDataSource
ddlDataSource.ID = "ReqCategoryData"
Page.Controls.Add(ddlDataSource)
ddlDataSource.ConnectionString = ConfigurationManager.ConnectionStrings("TTPRODReportsQuery").ConnectionString
ddlDataSource.SelectCommand = "SELECT TS_NAME AS ReqCategory FROM dbo.TS_SELECTIONS WHERE (TS_FLDID = 5299 AND TS_STATUS = 0) ORDER BY TS_NAME"
Dim args As New DataSourceSelectArguments
ddlDataSource.Select(args)
''Set max length of Title field to 70 characters
Dim dvrTest As DetailsViewRowCollection = DetailsView1.Rows
Dim TitleTB As TextBox = dvrTest.Item(0).Cells(1).Controls(0)
TitleTB.Attributes.Add("onkeydown", "isMaxLen(this)")
TitleTB.Attributes.Add("maxlength", "70")
Dim myDDL As DropDownList = DetailsView1.FindControl("reqCategoryDropDown")
''Perform dropdown list population operations
If Page.IsPostBack = False Then
Dim ticket_ID As String = getDataKey(DetailsView1)
''Fetch Category ID
Dim sqlText As String = "SELECT TS_REQCATEGORY FROM USR_ITFAC WHERE (TS_ID = " + ticket_ID + ") "
Dim reqDataReader As SqlDataReader = GetDataReader(sqlText)
reqDataReader.Read()
Dim category_ID As String = reqDataReader(0)
''Fetch Category name using the categoryID and set as selected value in dropdown list
sqlText = "SELECT TS_NAME FROM TS_SELECTIONS WHERE (TS_ID = " + category_ID + ") "
reqDataReader = GetDataReader(sqlText)
reqDataReader.Read()
category_Name = reqDataReader(0)
myDDL.DataBind()
End If
End Sub
Protected Sub DDL_DataBound(ByVal sender As Object, ByVal e As System.EventArgs)
If Page.IsPostBack = False Then
Dim myDDL As DropDownList = DetailsView1.FindControl("reqCategoryDropDown")
myDDL.Items.FindByValue(category_Name).Selected = True
End If
End Sub
View 1 Replies
Oct 5, 2010
I've stumbled across a strange problem with the AsyncFileUpload control: if the control doesn't exist on the initial load, the UploadedComplete event does not fire. For example, the following code works just fine:
[Code]....
But as soon as the code is wrapped in an if (IsPostBack) condition as shown below, FileUploaded no longer fires, even though the code is otherwise identical:
[Code]....
Would anyone be able to shed some light on why this is happening?
View 3 Replies
Nov 3, 2010
I have a hybrid ASP.Net web forms/MVC app. On one of the MVC "pages"/views, I have it render a bunch of dates using the ToShortDateString() and ToLongDateString(). These work correctly most of the time, but the first time I load the view after compiling the app, they are formatted incorrectly.
I traced this down and checked the current thread's culture. For 99% of the time it's en-US, but on the first load of the MVC view after compiling it is set to en-GB. If I reload the page immediately after that, it's back to en-US.
I have tried setting the culture and uiculture in the web.config file to en-US to force it to be correct, but no luck.
View 1 Replies
Apr 11, 2010
I have a simple web application that loads very slow the very first time after i deploy it. I am using ASP.NET 3.5 SP1 / VS 2008 / Linq / Web forms to load the default.aspx home page. It is a very light page with nothing too fancy.Now to debug this load issue, I logged all the events in the global file and got the following log text:
2010-04-10 11:58:38,083 - Application_Start
2010-04-10 11:58:38,111 - Application_BeginRequest
2010-04-10 11:58:38,117 - Application_AuthenticateRequest
2010-04-10 11:58:52,321 - Session_Start
2010-04-10 11:58:52,454 - Page_Load
2010-04-10 11:58:53,951 - End Page_load
2010-04-10 11:58:53,981 - Application_EndRequest
Now my question is, between the Application_AuthenticateRequest and Session_Start functions, there is generally around 10 - 15 seconds - which i believe seems to be the problem.The thing, I am unsure why this is slow between these two functions.I am not using any forms authentication.Also, I am not doing anything fancy in the global file besides setting a session variable.
View 9 Replies
Jan 11, 2011
For some reason my RadComboBox "EmptyMessage" is not showing on the initial load of the page but it does after I focus and blur out of the control. How can I force my "EmptyMessage" to show by default?
My .aspx is as follows:
<telerik:RadComboBox
ID="SomeFilter" runat="server"
EmptyMessage="Choose..."
OnClientSelectedIndexChanging="OnClientSelectedIndexChanging"
[Code].....
My combobox defaults to "Test1" by default instead of "Choose...". Once I open and close the combobox, however, the default changes to "Choose...".
View 1 Replies
Feb 14, 2011
about how many are using jQuery to create controls in the DOM after the initial page load.Curious also about any conventions for naming DOM objects in relation to database objects.Seems you could almost render the entire page using jQuery..Does that mean I am only using ASP.Net for the fact that my page methods will run in IIS on the web server?
View 17 Replies
May 14, 2010
I've searched around a lot, and honed this problem down to this case: I'm using the PRG pattern, pragmatically I'm using the same DTO for my post/get actions. It looks like when I have the dto with the data annotation attributes in the get action parameter list, the validation is always displaying errors, every time on initial page load. In some cases this could be desired behavior if you put asterisks in the error message, but how do I get rid of it?
View 1 Replies
Mar 24, 2011
On my Page_Load command for a page, I have a couple of tests that are performed before the screen is displayed with an alert box displaying if the user cannot access the screen. If Not Page.IsPostBack Then
UpdatePanel1.ContentTemplateContainer.Controls.Add(ctl)
UpdatePanel1.Update
UpdatePanel2.ContentTemplateContainer.Controls.Add(ctl)
[code]...
View 1 Replies
Jul 30, 2010
In a nutshell I have an UpdatePanel with an UpdateProgress item, first postback checks for warnings, if there are any they will be be displayed to the user as a JavaScript 'confirm' box. If the user clicks OK the next postback occurs to commit the change.
The UpdateProgress loading notification appears on the first postback but not on the second, even though both of them function correctly. The buttons that trigger both postbacks are async postback triggers in the update panel, and both are inside the ContentTemplate.
View 5 Replies
