I am in the process of designing a blogosphere that enable readers to leave comments. I want my dynamically added label controls added to the placeholder on the page to be retained and displayed on subsequent requests or postbacks to the same page. how do I go about this? I have tried using View State but it's kind of beyong me how to work it.
View 1 RepliesI have a nested master page that I use for multiple pages. There is a ContentPlaceHolder that is used for only one page, but it is not shown until after the first postback and some validation. I was first trying to use static controls and set the Visible property on the ContentPlaceHolder to true after the postback and that did not work at all. Then was messing with the visible properties of the Individual controls inside the ContentPlaceHolder which also did not work. I have the EnableViewState set to false for the Page and each of the controls including the ContentPlaceHolder. Is there a better way to do this? I can post my code if need be just wanted to see if there was a better solution to this before I did.
View 4 Replies Is there a way for a user to partially fill out a form and not commit it to the database, leave the page and come back to it and the information that the user filled out is still there?
I have four dropdowns in the first page and then a button which saves the selected values from the dropdown to a session state .
In the second page I do have previous button which comes to the first page. My problem is that the dropdown values are not getting preserved.
Here is my code for the First page
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
using MyBusinessLayer;
using MyDataLAyer;
[Code]......
The problem is that I get the error object instance not set to an instance of an object
I have an update panel with a gridview. When the user hovers over one field in the gridview, a HoverMenuExtender pops up to display more detail of the row from the gridview. The gridview also has a button, that when clicked, uses server.transfer to pass some info via the previous.page method about the row selected.
I can't get these two to work together. Either the update panel will work with the hover menu, or the button in the gridview will work with server.transfer. Sys.WebForms.PageRequestManagerParserErrorException is the error
Found this article that talke about using Response.Redirect instead of Server.Transfer. But, that won't work for me because Response.Redirect doesn't work with passing data between pages.
[URL]
So, what I'm trying to do is figure out how to set a button in my gridview to be asynchronus, but can't figure out how to do that with this button from my gridview.
[Code]....
In my Application_BeginRequest I have code that gets query string value ?c=FR or ?c=US and store it in cookies.Based on query string value I have either US or FR,locale is selected from locale table.If ?c=FR then locale will be fr-FR and if it is US then locale will be en-US.My code is below.
void Application_BeginRequest(object sender, EventArgs e)
{
LocalizationInfo loc = GetLocalizationInfo();
if (Request.Cookies["Localization"] == null)
Response.Cookies.Add(new HttpCookie("Localization"));
Response.Cookies["Localization"]["Country"] = loc.Country;
CultureInfo objCI = new CultureInfo(loc.Locale);
Thread.CurrentThread.CurrentCulture = objCI;
Thread.CurrentThread.CurrentUICulture = objCI;
}
public static LocalizationInfo GetLocalizationInfo()
{
string countryCode = "";
string sLocale = "";
if (HttpContext.Current.Response.Cookies["Localization"]["Country"] != null)
countryCode = HttpContext.Current.Response.Cookies["Localization"]["Country"];
if (!string.IsNullOrEmpty(HttpContext.Current.Request.QueryString["c"]))
countryCode = HttpContext.Current.Request.QueryString["c"];
if (countryCode == "")
countryCode = "US";
sLocale = HertzRent2Buy.DataProvider.ListData.GetLocale(countryCode);
LocalizationInfo ret = new LocalizationInfo();
ret.Country = countryCode;
ret.Locale = sLocale;
return ret;
}
public struct LocalizationInfo
{
public string Country;
public string Locale;
}
Now when I run the project and in query string I set [URL] then for the very first page(home page itself) it shows me French translation,but on subsequent page,that query string parameter ?c=FR is lost and hence it shows be English translation not French translation since it does not pickup French resx file.If I manually append ?c=FR in subsequent page then it shows the French translation.Is there is way how I can make that query stringparameter available in all pages.Structure is there to hold Country and locale variables. In all pages I am calling GetLocalizationInfo() method as follow
LocalizationInfo info = some.DataProvider.Globalization.GetLocalizationInfo();
And I create instance info to pass locale and country as parameter. GetProductDetails(id,info.Country,info.locale). why my query string parameters get lost on subsequent pages.
While generating dynamic controls like , textboxes, dropdownlist, checkboxes and radiobuttons, after filling the textboxes and etc and submit and then postback occurs, the dynamic created controls missing. I try to find a way to make the controls persist for validation checking. Tried to use Viewstate to store the pnlTextBoxes and etc, but it has serializable error.
[Code]....
i have a Method which create textboxes dynamicly. When i change one of my textbox's text, it create that amount textbox and label. But my problem is, when i entered values to them and click my button, they are disappearing and i cant find my controls. Some of my codes
[Code]....
What should i do for solving this ??
I have several dynamic user controls,that I want to load them in seperate tab panels.but my problem is when the postback occures my user controls disapeare from my tabpanels. however I want to keep my user controls in my tabs whenever I click on each tab.
View 5 RepliesI have a set of dynamically-created (IE: by code) controls on my web page. Depending on which options the user decides to go (Edit/New), those controls are re-created with the appropriate information (IE: "with values" with Edit, "without values" with New).
Here's the situation:
- I create my controls in InitComplete when it comes to save the data (both on Edit/New) contained within the controls.
- I create my controls in PreLoad when it comes to load them initially (Both on Edit/New) in order to avoid the ViewState to kick in.
However, despite creating the controls after the ViewState has been applied (technically), the controls still somehow retain the pre-postback's information. IE: if I have options 2 and 4 selected and I choose "New", which should show the options without being selected, they remain selected no matter what. And this is true despite changing their values in the PreLoad state. From my understanding, creating a control in this fashion and at that point in the page lifecycle should override any values the ViewState might have had for those controls. I have also tried to disable the parent's control viewstate (Table.EnableViewState = false) again, to no avail.
I've tried using the Me.ViewState.clear() and Me.ClearChildViewSate prior to loading the initial values as well, but again all for naught. I do understand that any control created after the Init phase of the lifecycle has to play "catchup" with the current state, however I would expect that clearing the ViewState prior to creating the controls would fix this issue. It doesn't seem to.
i have places a treeview in the master page, if i click on certain node it will navigate to some x.aspx page.here the proble is treview nodes all are collasped.
View 2 RepliesIn my web application, I set the mode of session state as State Server and point to another server. After run some days, I always meet following exception:
The state server has closed an expired TCP/IP connection. The IP address of the client is 192.168.80.157. The expired Read operation began at 08/25/2010 14:18:03.
when we go for client and server side state management in asp.net
View 2 Repliesi have a widget(say some widget to get two cities) on my home page. also a submit button. when the user clicks the submit button, the value of cities given in the widget is passed to the next page and displayed in two text boxes respectively. sample code given below.
http://home.aspx/SessionHandler.aspx?pub=/english&pageurl=/search.aspx§ion=search&seldcity1=berlin&selacity1=dublin&selddate1=15-Dec-10&seladate1=29-Dec-10&resultby=1&bsp=Timetables&j=f&showpage=true&TID=SB&CID=
now i need to modify this page so that the search.aspx page should be dispalyed on some condition. smaple url:
http://home.aspx/SessionHandler.aspx?pub=/english&pageurl=/search.aspx§ion=search&seldcity1=berlin&selacity1=dublin&selddate1=15-Dec-10&seladate1=29-Dec-10&resultby=1&bsp=Timetables&j=f&showpage=true&TID=SB&CID=&showsearch=true
how do i acheive this? also, where should i modify the code. in the target page(search.aspx) rite? also which section of that page? some key words pls??
Ive got an ASP.net web application and was testing the pages.At the moment I store a variable in the
System.Web.HttpContext.Current.Session[
say the user is authenticated when they have been verified on login.So if the login is successful the authenticated is set to true.This is checked on every page load to make sure they have logged in.What I did was to log in and then the Main Menu page is displayed.I copied the address of this, set the page to goggle's page then pasted the address back into the address bar and the page loaded back up.How can I stop this from happening?Should have some mechanisim to prevent this?If so how.
how to pass the value from one page to another page in asp.net with out Using State Management Concepts?
Like 1. cookies 2.Sessiion 3. QueryStrings.With out using the above should pass the values..
i have asp.net treeview control on my masterpage which is associated with many pages now my requirement is that when ever iam clicking child nodes in the treeview its getting navigate to the appropriate page but treeview not retaining its position.its getting collapse to its default position.
View 2 RepliesWe have used Session heavily in our application, we have created core classes (which have many properties) and store objects of core class in the session.
1) What could be the best solution for reflector activity?
2) What could be the best way to manage session in an application which has 100 pages?
I am using Visual C#. ould smbd tell me how can i take the data inserted from the user (1. in a textbox 2. in a dropdownList and 3. in a radiobutoonList) and use (or display) that data in another .aspx page ?
View 2 RepliesI had created one array who's value I want to pass to different webpages in asp.net,
I am looking for session variable ,,,, Is this correct way ,,,, and hw to insert value in array and fetch from it using session variable
in one ascx page i'm using gridview.from that i'm selecting a cell value as follows
foreach (GridViewRow gvr in grdOrganization.Rows)
I have to split a long form into two pages. In the first page, I have a button "Next Page" to second page and in second page, a button "Previous page" to go to first page. How do I keep the form data when click "next page" and "previous page"?
I am using session variables to pass the form data. I have the server control Enableviewstat as true, but it still doesn't work. What else should I do? My code as below:
[Code]....
I am using the Session ID Manager. Now the session count is 0 between the access to pages, so I cannot access the Session variables. How do I save the value of Session variables.
View 3 RepliesHow can I retain the value of variables that I fill from CodeBehind throughout the session? (C#). For example, I do a LINQ query from the log in "on-Click" button event. The query produces a bunch of data about the user that I want to access throughout the session on additional ASP pages. I know that I can pass a large query string but I suspect that there is a better way. Here's a specific...
from the db function I product: COS=2 (class of service). Throughout the session, I test for COS and display appropriate pages. Assume that the LINQ query is accomplished in the CodeBehind attached to the "loginButton" within the "login.aspx" page.
I am using Session ID Manager in all the pages of the website, but I am losing session variables in between the pages. what should I do to save the values of session variables.
Anoop