State Management :: Setting EventViewer Source And Name In Application_Start()

Jun 28, 2010

We have written a basic event logger that's registered in our Computer Management->System Tools->Event Viewer that writes any exceptions in our ASP..Net/C# web application.

IE:

[Code]....

In order to write to the proper Event, we thought we could set the LOG NAME and SOURCE NAME properties in the Application_Start(), but it seems we're experiencing situations where the event logger is losing a reference to the SOURCE NAME property and we're getting an intermittent error (IE: on LINE 8) saying: Must Specify Value For Source. Here's where we set it:

[Code]....

Perhaps the Application_Start() is not the best place for setting these properties?

View 2 Replies


Similar Messages:

State Management :: Application_start Should Fire On Reqular Intervals?

Oct 28, 2010

I am getting user information from Ldap server.Because of this I am getting performance issues in my application. For this I have a created a method in Application_start event then everything is working fine, my problem is when ever user adds in Ldap those information is not getting reflected in the application because we have implemented this in application_start event.SoI want to keep this method in application_start only and I want to update the new users also in my application how to do this.If I write same code in session_start event then if user clicks on user maintenace tab then processing the request message is coming. So I want to be keep in Application_start event and also it should update the latest user information in the application.

View 1 Replies

State Management :: Want To Access Url In Application_start Event In Global.asax?

Dec 1, 2010

Suppose my website address is like http://localhost/MyWebsite

I wanted to access this url in Application_start event in global.asax, Can i some how get it?

[I know i can get it via application_beginrequest or other event]

View 17 Replies

State Management :: Session State/ Setting Start And End Timings?

Oct 30, 2010

I created a form where I put some radio buttons. When User select one of them depending upon the option it will start his / her time counter. StartTime and EndTime and I am couting total time he/she takes. Till here it is OK. But what I want when user clicks on Logout, then he/she will logged out (Temporary). and after the some time when he / she will again login..... here, I want to set his / her EndTiming. I don't understand how to maintain this state?

View 5 Replies

State Management :: Setting Session Variable From Formview

Apr 13, 2010

I'm building a site (it's amazing how much you can do and still not know what you're doing).I have my visitor login from a login.aspx page and, when authenticated are redirected to a Portal page. On that Portal page at pageload I set a Session variable "UserName" using the User.Identity.Name like this:

Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
If User.Identity.Name <> "" And User.Identity.IsAuthenticated = True Then
If Page.IsPostBack = False Then
Session("UserName") = User.Identity.Name
End If
[code]...

View 4 Replies

State Management :: Setting Session Variables Causes Whole App To Slowdown?

Dec 15, 2010

I have a web application running on IIS 7 on a Windows 7 machine. The app pool is configured for .Net 4, 32 bit enabled, Integrated Pipeline.

Everything seems to be fine with the app until I first create a session variable in one of my asmx pages.

Once I've created the session variable the handling of subsequent http requests sometimes takes upwards of 30 after the browser has posted to my asmx page before the function is actually invoked. I've been looking all over my configuration settings and searching the web and still have no idea what could be going wrong here.

The method that sets the session variable looks something like this:

[Code]....

View 9 Replies

State Management :: Setting The Output Cache For 5 Pages (5 Minutes)?

Aug 27, 2010

I have set the output cache for 5 pages(5 minutes)

I want to clear all these pages from cache on some nutton click

View 2 Replies

State Management :: Setting Session In A Sample.HTML Page?

Feb 22, 2011

I have developed a project including many pages. But the initial page is HTML , not an aspx page. I want to set the session("language") at this page first. (user can change the language later in the forms)

View 2 Replies

State Management :: Session Timesout Inspite Of Setting It For 45 Minutes

Oct 18, 2010

I am using the "Inproc" mode of setting session state to 45 minutes but still the session times out after 10 or so minutes.

Following is the setting included in the web.config:

<sessionState mode="InProc" cookieless="false" timeout="45"/>

View 3 Replies

State Management :: SQL Server Based Cache Dependency Without Data Source Control?

May 29, 2010

I want to use SQL Server based Cache dependency without data source control.How can I do it?I am binding data to grid through code.

View 5 Replies

State Management :: Session Variable Be Hacked As They Are Stored In An External Data Source?

May 30, 2010

i have done the following

void Session_Start(object sender, EventArgs e)
{
// Code that runs when a new session is started [code]...

basically am using them to store user id and status, so that pages can be validated, by there use.i can stop person from accessing home directly wihtout signing is and so on.can session variable be hacked as they are stored in an external data source and are available to the full website?

View 3 Replies

State Management :: To Prevent The Server From Setting Cookie On The Client Machine?

Sep 2, 2010

I have deployed a Web application on IIS 6. I want to prevent my server from setting cookie on the client browser. I am using the following setting on the web.config file.

< sessionState
mode="InProc"
cookieless="false" [code]....

However, it looks like its creating a default cookie named ".ASPXAUTH" in the client machine. I dont want my application to create any sort of cookie.Is there anything specific I need to do in web.config?

View 3 Replies

State Management :: Setting Session Values In Generic Handler And Accessing Them From A Page?

Jun 10, 2010

I have a generic handler in which I fill up a Session variable. I implemented the IRequiresSessionState interface, so it shouldn't be a problem.

In a given page, I want to display that value, but it seems like the value is always empty. Is it because the session that is accessed and written to in the handler isn't the same one that is used on this page?

In the handler, I used context.Session["EID"] = "somevalue";

edit: i found out what the issue is but I do not know how to solve it. It's because I have this Java applet which reads out an eID, calls the handler to store the data, but the session used by the applet is not the same as the session used by the browser... so how could I exchange this data in a safe way?

View 1 Replies

Open Source Lead Management System With Source Code?

Sep 6, 2010

asp.net open source Lead management system with source code.

View 9 Replies

State Management :: Client And Server Side State Management?

Feb 25, 2011

when we go for client and server side state management in asp.net

View 2 Replies

State Management :: Master Page's Treeview Selected Node / Setting The Properties In Master Page?

Aug 2, 2010

I have a master page containing a tree and 3 dropdown lists. I am populating a context menu on right click of each node, and when clicked on any item of the context menu, it navigates to required pages.

My problem is after navigating to the required page, the selected values from the drop down lists and the selected node from the tree are getting cleared.

I can set the selected values for the dropdown lists by making some properties in master page.
But how do i maintain the selected node?

In my content page, i have got the valuepath of the right clicked node.

Or is there any other way than setting the properties in master page?

View 6 Replies

State Management :: State Management Using Shared Class?

May 29, 2010

I am doing a POC of making my website run faster. Currently it stores huge object data in Session while passing information from one page to another. What I was thinking is to use shared methods and properties instead of session. It works, but wanted tocheck if this is an optimum way to do it. Below is the code that does not use session but still pass object data from one page to another:

[code]...

View 1 Replies

State Management :: State Management And Page Navigation?

Nov 18, 2010

i have a form on page1.aspx with several controls (textbox, dropdownlist, etc).on Page1 PageLoad event i load data from database and performe databinding.From Page1 a user can, by clicking a specific button, move to Page2.aspx to insert some details and, after saving details, he returns to page1.

if save changes are made on control on page1 before save them to db, obviously, these are lost on return from page2 (because are reloaded on pageload from db).How can i save control status between pages round trip?

View 3 Replies

State Management :: Get The Correct Concept For State Management?

Aug 16, 2010

i need to know the full concepts state manegemnt in asp.net,..in which site i will get the correct concept for state management....

View 4 Replies

State Management :: Application State And Session State?

Oct 2, 2010

User Interface: 2 Labels; 1 Buttons

Requirements: Create a Web Page in ASPx that will do the following:

1)One label will provide a count of how many times Button 1 has been clicked in the current session.

2)One label will provide a count of how many times Button 1 has been clicked by all users of the application. The Application Code for the Button should start at 100 (set this in the Global.asax file). this is what i have so far but i cant seem to get the application state to work properly.

aspx.vb

Partial Class _Default
Inherits System.Web.UI.Page
Dim clickcount As Integer

Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load

If Session("ClickCount") Is Nothing Then
clickcount = 0
Else
clickcount = CInt(Session("ClickCount"))
End If
If Not IsPostBack Then
If Request.Cookies("UserName") IsNot Nothing Then
Label1.Text = "Welcome Back " & Request.Cookies("UserName").Value & "."
End If
End If
Dim clickCounta As Integer = CInt(Application("ClickCount"))
End Sub
Protected Sub PostBackSession_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles PostBackSession.Click
clickcount += 1
lblClkCnt.Text = "Current Click Count is " & clickcount
Application.Lock()
Dim clickCounta As Integer = CInt(Application("ClickCount"))
clickCounta += 1
Application("ClickCount") = clickCounta
Application.UnLock()
AppClick.Text = clickCounta
Dim nameCookie As New HttpCookie("UserName", _
TextBox1.Text)
nameCookie.Expires = Now.AddYears(1)
Response.Cookies.Add(nameCookie)
End Sub
Protected Sub PostBackSession_PreRender(ByVal sender As Object, ByVal e As System.EventArgs) Handles PostBackSession.PreRender
Session("ClickCount") = clickcount
Application("ClickCount") = clickcount
End Sub
End Class
global.asax
<script runat="server">
Sub Application_Start(ByVal sender As Object, ByVal e As EventArgs)
Dim clickCounta As Integer = CInt(Application("ClickCount"))
Application.Add("ClickCount", 0)
End Sub
Sub Application_End(ByVal sender As Object, ByVal e As EventArgs)
Dim clickCounta As Integer = CInt(HttpContext.Current.Application("ClickCount"))
End Sub
Sub Application_Error(ByVal sender As Object, ByVal e As EventArgs)
' Code that runs when an unhandled error occurs
End Sub
Sub Session_Start(ByVal sender As Object, ByVal e As EventArgs)
End Sub
Sub Session_End(ByVal sender As Object, ByVal e As EventArgs)
End Sub

View 3 Replies

State Management :: Session Mode State Server - Sending Asynchronous Request

Nov 5, 2010

Customer were getting "View State Validation Error" due to worker process recycling at our production webserver and to fix that i applied machinekey and then move my Session state Mode from In Proc to State Server to retain session data and not kick out the customer to relogin. I had serialization issue with one object which has to be stored in session but when i moved it out of session i could able to resolve the issue.

But doing all these i was partly successfull in keeping the user in their session when Worker Process recycle event occurs.I was able to refresh the page or make a post back by clicking the refresh button and also able to retain the session values. But the Problem occurs when sending asynchronous request to server which we do periodically every 15 minutes from the moment the user logs in.The web page doesnot update data on website when sending asynchronous request.By Debugging I found at this particular code point it fails to make a postback which is required.

<%=GetHintFromServer%> (When there is no Worker Process recycle i t gets replaced by
WebForm_DoCallback('__Page',message,ShowHint,null,null,false) on postback) Everything works fine when there is no Worker Process Recyling but when it happens looks like sending request asynchronously using javascript fails .Remember When I make a post back by manually clicking submit button everything works fine.

SendRequest(Asynchronous)
function SendRequest(msg, isBusy, chartMsg, vesselMsg)
{
try
{
//confirm("msg"+msg+"isBusy"+isBusy+"chartMsg"+chartMsg+"VesselMsg"+vesselMsg);
_busy = isBusy;
if(chartMsg != null)
{
//confirm("chartMsg"+chartMsg);
_element.SetMessage(true, chartMsg);
}
if(vesselMsg != null)
{
confirm("chartMsg"+vesselMsg);
_element.ShowVesselLoading(true, vesselMsg);
}
_stuckWatchdog = setTimeout( "ClearPendingRequest();", 60000);
var message = msg;
var context = '';
<%=GetHintFromServer%>
}
catch(e)
{
alert( "Exception error on SendRequest(): " + e);
}
}

View 2 Replies

State Management :: Custom Control: State Restoring For Controls Created With CreateChildControls

Dec 22, 2010

Let me explain, describing the scenario:In a custom server control (in my case, derived from CompositeControl), in the overidden CreateChildControls method I create a complex tree of subcontrols, using information from a db.The db provides both information on which controls I need to create (the user interface's structure) and the data used to fill these controls.Than the user can interact with the control and change the data (that becomes different to what stored on db).

My custom control lives in the same page where there are other controls, obviously.And these controls can cause a postback at any time.What I need is that my custom control keeps the data entered by the user across these postback, without reverting to the original data and loose the user data entry.

Here is the first doubt:

1)I create the subcontrols dinamically in the CreateChildControls at any page refresh (both on first call than on postback).I know that the framework solves the reference between the posted data and the controls I create in the CreateChildControls in order to set properties and raise control events, but can you tell me when and how it actually does this? In which phase of page life cycle? What happens after the CreateChildControls?

A second doubt:2)If the user interface structure must change as a consequence of the data entered, I had to execute CreateChildControls twice (the first time to recreate the original interface to get the events and the second time to create the new interface)
In which phase of page/control lifecycle do I have to make the second call to CreateChildControls? I do it on Prerender now, but is it right or wrong, and why?

View 1 Replies

State Management :: Unable To Serialize The Session State In 'StateServer' And 'SQLServer' Mode

Dec 12, 2010

I am new to .net 4.0 and am using EF Model and SessionState Mode=SqlServer and I am getting this error below:

Unable to serialize the session state. In 'StateServer' and 'SQLServer' mode, ASP.NET will serialize the session state objects, and as a result non-serializable objects or MarshalByRef objects are not permitted. The same restriction applies if similar serialization is done by the custom session state store in 'Custom' mode.

I checked the stack trace and its complaining about

[assembly: global::System.Data.Objects.DataClasses.EdmSchemaAttribute()]
[assembly: global::System.Data.Objects.DataClasses.EdmRelationshipAttribute("PoplarGroveModel", "tblMenuRole", "tblMenu", global::System.Data.Metadata.Edm.RelationshipMultiplicity.Many, typeof(PoplarGroveDataModel.Menu), "tblRole",

[Code].....

I marked it as serializable but then it complains about System.Data.Objects.ObjectContext is not marked as serializable and hence throws the same error.

View 1 Replies

State Management :: Maintain Page View State In Roundtrip Between Webpages?

Jun 15, 2010

I am having a ASP.net application it having three pages ,page 1,page 2,page 3,when the user navigating between this pages I want to maintain the view state in page level after postbacks(i.e.) .If a user visits page 3, passing some query loads some data .then he moves to page 1 doing some entries .after that he once again moves to page 3 now I want to display the data previously available at the time he moves to page 1, same
way I want to do to my three pages up to the user logging out.

View 8 Replies

State Management :: Recreate State Session Database In SQL Server 2008?

Apr 5, 2010

Our ASP.NET App uses ASP State Session Management and has been rebuilt about 2 years ago [With .NET Framework 2.0]. We are currently in .NET framework 3.5 and have moved to SQL Server 2008 - but continue to use the same ASPState database. The State database has been upgraded to SQL Server 2008. Since then we have are seeing timouts/locks on ASPStateTempSessions table. I am wondering if we have to rebuild this database from scratch with some newer scripts?

View 2 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved