State Management :: Application_start Should Fire On Reqular Intervals?
Oct 28, 2010
I am getting user information from Ldap server.Because of this I am getting performance issues in my application. For this I have a created a method in Application_start event then everything is working fine, my problem is when ever user adds in Ldap those information is not getting reflected in the application because we have implemented this in application_start event.SoI want to keep this method in application_start only and I want to update the new users also in my application how to do this.If I write same code in session_start event then if user clicks on user maintenace tab then processing the request message is coming. So I want to be keep in Application_start event and also it should update the latest user information in the application.
View 1 Replies
Similar Messages:
Jun 28, 2010
We have written a basic event logger that's registered in our Computer Management->System Tools->Event Viewer that writes any exceptions in our ASP..Net/C# web application.
IE:
[Code]....
In order to write to the proper Event, we thought we could set the LOG NAME and SOURCE NAME properties in the Application_Start(), but it seems we're experiencing situations where the event logger is losing a reference to the SOURCE NAME property and we're getting an intermittent error (IE: on LINE 8) saying: Must Specify Value For Source. Here's where we set it:
[Code]....
Perhaps the Application_Start() is not the best place for setting these properties?
View 2 Replies
Dec 1, 2010
Suppose my website address is like http://localhost/MyWebsite
I wanted to access this url in Application_start event in global.asax, Can i some how get it?
[I know i can get it via application_beginrequest or other event]
View 17 Replies
Mar 31, 2010
In my project Session end event is not getting fire.
How to fire it in global.asax file..
View 4 Replies
Dec 20, 2010
i have a problem with web application bulit on vs2005,an application work client/server .the application End event fire every 1 hour almost,although there is no changes on web.config or deleting files!
View 8 Replies
Dec 8, 2010
I need to have a timer to count down a multiple-paged online quiz. The timer countdown should decrement consecutively on each following page. It is tricky to use javascript to maintain the timer value across multiple pages through sequences of postbacks. So, I have been searching a server-side solution and found this:
http://forums.asp.net/p/1621352/4161304.aspx (see the response by Wenchao Zeng - MSFT, the 4th post in that thread).
I created a small web application to test it out and it works great. But when I put the code into a header user control (Header.ascx) in my quiz application, the Timer control's OnTick event never fires. I put a break point in the first line of Timer1_Click, but the debugger of visual studio never gets there.
I tried this:
[Code]....
The code behind is the same (except maybe UI control names) as the one we see at the thread I referred to above. But Timer1_Click never gets executed (and hence my countdown doesn't get displayed). The CountDownTimer class works just fine because I can see from the debugger that the time value is decreasing like I want.
View 4 Replies
Sep 8, 2010
Why Session_OnEnd does not fire in state server & SQL Server modes....... i mean what is the speciality in InProc mode that Session_OnEnd fires in that mode only ????
View 1 Replies
Feb 25, 2011
when we go for client and server side state management in asp.net
View 2 Replies
May 29, 2010
I am doing a POC of making my website run faster. Currently it stores huge object data in Session while passing information from one page to another. What I was thinking is to use shared methods and properties instead of session. It works, but wanted tocheck if this is an optimum way to do it. Below is the code that does not use session but still pass object data from one page to another:
[code]...
View 1 Replies
Nov 18, 2010
i have a form on page1.aspx with several controls (textbox, dropdownlist, etc).on Page1 PageLoad event i load data from database and performe databinding.From Page1 a user can, by clicking a specific button, move to Page2.aspx to insert some details and, after saving details, he returns to page1.
if save changes are made on control on page1 before save them to db, obviously, these are lost on return from page2 (because are reloaded on pageload from db).How can i save control status between pages round trip?
View 3 Replies
Aug 16, 2010
i need to know the full concepts state manegemnt in asp.net,..in which site i will get the correct concept for state management....
View 4 Replies
Oct 2, 2010
User Interface: 2 Labels; 1 Buttons
Requirements: Create a Web Page in ASPx that will do the following:
1)One label will provide a count of how many times Button 1 has been clicked in the current session.
2)One label will provide a count of how many times Button 1 has been clicked by all users of the application. The Application Code for the Button should start at 100 (set this in the Global.asax file). this is what i have so far but i cant seem to get the application state to work properly.
aspx.vb
Partial Class _Default
Inherits System.Web.UI.Page
Dim clickcount As Integer
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
If Session("ClickCount") Is Nothing Then
clickcount = 0
Else
clickcount = CInt(Session("ClickCount"))
End If
If Not IsPostBack Then
If Request.Cookies("UserName") IsNot Nothing Then
Label1.Text = "Welcome Back " & Request.Cookies("UserName").Value & "."
End If
End If
Dim clickCounta As Integer = CInt(Application("ClickCount"))
End Sub
Protected Sub PostBackSession_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles PostBackSession.Click
clickcount += 1
lblClkCnt.Text = "Current Click Count is " & clickcount
Application.Lock()
Dim clickCounta As Integer = CInt(Application("ClickCount"))
clickCounta += 1
Application("ClickCount") = clickCounta
Application.UnLock()
AppClick.Text = clickCounta
Dim nameCookie As New HttpCookie("UserName", _
TextBox1.Text)
nameCookie.Expires = Now.AddYears(1)
Response.Cookies.Add(nameCookie)
End Sub
Protected Sub PostBackSession_PreRender(ByVal sender As Object, ByVal e As System.EventArgs) Handles PostBackSession.PreRender
Session("ClickCount") = clickcount
Application("ClickCount") = clickcount
End Sub
End Class
global.asax
<script runat="server">
Sub Application_Start(ByVal sender As Object, ByVal e As EventArgs)
Dim clickCounta As Integer = CInt(Application("ClickCount"))
Application.Add("ClickCount", 0)
End Sub
Sub Application_End(ByVal sender As Object, ByVal e As EventArgs)
Dim clickCounta As Integer = CInt(HttpContext.Current.Application("ClickCount"))
End Sub
Sub Application_Error(ByVal sender As Object, ByVal e As EventArgs)
' Code that runs when an unhandled error occurs
End Sub
Sub Session_Start(ByVal sender As Object, ByVal e As EventArgs)
End Sub
Sub Session_End(ByVal sender As Object, ByVal e As EventArgs)
End Sub
View 3 Replies
Nov 5, 2010
Customer were getting "View State Validation Error" due to worker process recycling at our production webserver and to fix that i applied machinekey and then move my Session state Mode from In Proc to State Server to retain session data and not kick out the customer to relogin. I had serialization issue with one object which has to be stored in session but when i moved it out of session i could able to resolve the issue.
But doing all these i was partly successfull in keeping the user in their session when Worker Process recycle event occurs.I was able to refresh the page or make a post back by clicking the refresh button and also able to retain the session values. But the Problem occurs when sending asynchronous request to server which we do periodically every 15 minutes from the moment the user logs in.The web page doesnot update data on website when sending asynchronous request.By Debugging I found at this particular code point it fails to make a postback which is required.
<%=GetHintFromServer%> (When there is no Worker Process recycle i t gets replaced by
WebForm_DoCallback('__Page',message,ShowHint,null,null,false) on postback) Everything works fine when there is no Worker Process Recyling but when it happens looks like sending request asynchronously using javascript fails .Remember When I make a post back by manually clicking submit button everything works fine.
SendRequest(Asynchronous)
function SendRequest(msg, isBusy, chartMsg, vesselMsg)
{
try
{
//confirm("msg"+msg+"isBusy"+isBusy+"chartMsg"+chartMsg+"VesselMsg"+vesselMsg);
_busy = isBusy;
if(chartMsg != null)
{
//confirm("chartMsg"+chartMsg);
_element.SetMessage(true, chartMsg);
}
if(vesselMsg != null)
{
confirm("chartMsg"+vesselMsg);
_element.ShowVesselLoading(true, vesselMsg);
}
_stuckWatchdog = setTimeout( "ClearPendingRequest();", 60000);
var message = msg;
var context = '';
<%=GetHintFromServer%>
}
catch(e)
{
alert( "Exception error on SendRequest(): " + e);
}
}
View 2 Replies
Dec 22, 2010
Let me explain, describing the scenario:In a custom server control (in my case, derived from CompositeControl), in the overidden CreateChildControls method I create a complex tree of subcontrols, using information from a db.The db provides both information on which controls I need to create (the user interface's structure) and the data used to fill these controls.Than the user can interact with the control and change the data (that becomes different to what stored on db).
My custom control lives in the same page where there are other controls, obviously.And these controls can cause a postback at any time.What I need is that my custom control keeps the data entered by the user across these postback, without reverting to the original data and loose the user data entry.
Here is the first doubt:
1)I create the subcontrols dinamically in the CreateChildControls at any page refresh (both on first call than on postback).I know that the framework solves the reference between the posted data and the controls I create in the CreateChildControls in order to set properties and raise control events, but can you tell me when and how it actually does this? In which phase of page life cycle? What happens after the CreateChildControls?
A second doubt:2)If the user interface structure must change as a consequence of the data entered, I had to execute CreateChildControls twice (the first time to recreate the original interface to get the events and the second time to create the new interface)
In which phase of page/control lifecycle do I have to make the second call to CreateChildControls? I do it on Prerender now, but is it right or wrong, and why?
View 1 Replies
Dec 12, 2010
I am new to .net 4.0 and am using EF Model and SessionState Mode=SqlServer and I am getting this error below:
Unable to serialize the session state. In 'StateServer' and 'SQLServer' mode, ASP.NET will serialize the session state objects, and as a result non-serializable objects or MarshalByRef objects are not permitted. The same restriction applies if similar serialization is done by the custom session state store in 'Custom' mode.
I checked the stack trace and its complaining about
[assembly: global::System.Data.Objects.DataClasses.EdmSchemaAttribute()]
[assembly: global::System.Data.Objects.DataClasses.EdmRelationshipAttribute("PoplarGroveModel", "tblMenuRole", "tblMenu", global::System.Data.Metadata.Edm.RelationshipMultiplicity.Many, typeof(PoplarGroveDataModel.Menu), "tblRole",
[Code].....
I marked it as serializable but then it complains about System.Data.Objects.ObjectContext is not marked as serializable and hence throws the same error.
View 1 Replies
Jun 15, 2010
I am having a ASP.net application it having three pages ,page 1,page 2,page 3,when the user navigating between this pages I want to maintain the view state in page level after postbacks(i.e.) .If a user visits page 3, passing some query loads some data .then he moves to page 1 doing some entries .after that he once again moves to page 3 now I want to display the data previously available at the time he moves to page 1, same
way I want to do to my three pages up to the user logging out.
View 8 Replies
Apr 5, 2010
Our ASP.NET App uses ASP State Session Management and has been rebuilt about 2 years ago [With .NET Framework 2.0]. We are currently in .NET framework 3.5 and have moved to SQL Server 2008 - but continue to use the same ASPState database. The State database has been upgraded to SQL Server 2008. Since then we have are seeing timouts/locks on ASPStateTempSessions table. I am wondering if we have to rebuild this database from scratch with some newer scripts?
View 2 Replies
Jan 21, 2011
I'm using the following line of code to display the number of users currently logged on:
lblNoOfUsers.Text = Membership.GetNumberOfUsersOnline().ToString()
I'm still debugging my application so it's on the local server. As I debug and stop then debug again, eventually lblNoOfUsers.text turns to "0" instead of "1", even as I'm navigating my application. It only turns to "1" again if I log out and sign back in. It's almost as though Membership.GetNumberOfUsersOnline my login are referencing two different session states. How is this possible? Does asp.net create a new session state cookie each time I start debugging?
View 2 Replies
Feb 2, 2011
I am trying to set a session variable in the global.asax file and keep running into the problem that the Session is null.
I am running my application in VS2008 and using asp.net 3.51.
Here is my code:
1. In my web.config file I have enabled the session state and added the following line;
<sessionState
cookieless="false"
mode="InProc"
timeout="60"
></sessionState>
2. In the Session_Start procedure in the Global.asax file I set the session variable to a default value.
[Code]....
My problem seems to be that when the Application_Error procedure is executed the session state is lost.
Does anyone know why the session state isn't available in the Global.asax file.
View 9 Replies
Nov 1, 2010
All we have a global ships position tracking website which runs smoothly until IIS application pool recycles.When there is workerprocess recycling looks like session state expires as a result i loose all session data and when customer clicks refresh button he is redirected to login page.
In web.config Session state mode is set to InProc so i changed it to State Server but to my luck i have MAP object which is not serialiazable which is causing the maps from not appearing on the website.I tried adding serializable attribute to the object class but still not succesfull.Our website is accessed by our customers whose count is more than 1000.
Changing the session state mode from InProc to StateServer can really slow down the response time so
Is it good to go further fix the serailizable issues and move to state server?.
Is there any way I can retain my session data when application pool recyles?..
Stopping Application pool from recycling may not be a good idea considering health factor of web server.
View 8 Replies
Oct 1, 2010
i have one method which save datatable in viewstate.i am calling this method in. page_load2. Prerenderthe page was every heavy,i did tracing of page i found due to calling of method from preprnder it doubled the viewstate sizewhat was the reseon behind this.
View 2 Replies
May 26, 2010
I am getting this error while executing my Asp.Net application.i am not able to execute application using Visual Studio Interface and when i am trying to execute application from Local IIS. its executing well but when i am trying to click any button for searching etc it is giving this error. The state information is invalid for this page and might be corrupted. The detailed information is
[Code]....
[FormatException: Invalid character in a Base-64 string.] System.Convert.FromBase64String(String s) +0 System.Web.UI.ObjectStateFormatter.Deserialize(String inputString) +72 System.Web.UI.ObjectStateFormatter.System.Web.UI.IStateFormatter.Deserialize(String serializedState) +4 System.Web.UI.Util.DeserializeWithAssert(IStateFormatter formatter, String serializedState) +37 System.Web.UI.HiddenFieldPageStatePersister.Load() +113[ViewStateException: Invalid viewstate. Client IP: 127.0.0.1Port: 1307User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.1.249.1064 Safari/532.5ViewState: 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...][HttpException (0x80004005): The state information is invalid for this page and might be corrupted.] System.Web.UI.ViewStateException.ThrowError(Exception inner, String persistedState, String errorPageMessage, Boolean macValidationError) +106 System.Web.UI.ViewStateException.ThrowViewStateError(Exception inner, String persistedState) +14 System.Web.UI.HiddenFieldPageStatePersister.Load() +217 System.Web.UI.Page.LoadPageStateFromPersistenceMedium() +105 System.Web.UI.Page.LoadAllState() +43 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +6785 System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +242 System.Web.UI.Page.ProcessRequest() +80 System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context) +21 System.Web.UI.Page.ProcessRequest(HttpContext context) +49 ASP.pages__cmtickets_cmtickets_reports_cmtickets_search_aspx.ProcessRequest(HttpContext context) in c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Filesapp_mobily_alexmare1eddc658e6f2ba5App_Web_b9acfmsy.14.cs:0 System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +181 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +75
Version Information: Microsoft .NET Framework Version:2.0.50727.3603; ASP.NET Version:2.0.50727.3082
View 3 Replies
Apr 29, 2010
I have a clear button and a textbox in an aspx page. I set the session variable in this page as
String str = Textbox1.Text;
Session["TypeIds"] = str;
and I clear the sessions in a clear button event as
Session["TypeIds"]=null;.
Then when the user types some value in the textbox ,on Response.Redirect on another aspx page, the session variable returns null values.It does not retain its session state. The session state has to be maintained in the next page. Is it because this clear button event and setting explicitly to null creates this problem?
View 7 Replies
Oct 27, 2010
The fix for this error message is to run [Code]..... I have run that uptown, downtown and in my lady's chamber and it does no good, although it never complains. Are there any other possibilities?Details:
IIS Server: v5.1 running on XP. SQLServer 2005 running on a different XP box.Microsoft .NET Framework Version:2.0.50727.3615; ASP.NET Version:2.0.50727.3618 There is an ASPState database on the server, containing only two tables: [Code].... and [Code]..... I did not use [Code].... when I ran [Code]....
.
View 2 Replies
Dec 3, 2010
I am building a web app that is limited to one database, therefore I cannot use the ASP.NET config tool. As a quick means of getting this app online, I tried to use a simple session variable. The login page verifies the user's credentials, and if they pass, it sets the session variable to a certain value. All other pages check in the page_load event whether or not the session variable is equal to that value. The problem is that once being logged in for a short while and sending and recieving some data, the session variable resets, and I'm returned to the login page to repeat the process. Here's the basic code from my webforms:
[code]....
Is there some setting I need to change in the web.config file to adjust the cookie timeout or is that only for the config tool authentication methods?
View 5 Replies
