State Management :: State Management And Page Navigation?
Nov 18, 2010
i have a form on page1.aspx with several controls (textbox, dropdownlist, etc).on Page1 PageLoad event i load data from database and performe databinding.From Page1 a user can, by clicking a specific button, move to Page2.aspx to insert some details and, after saving details, he returns to page1.
if save changes are made on control on page1 before save them to db, obviously, these are lost on return from page2 (because are reloaded on pageload from db).How can i save control status between pages round trip?
View 3 Replies
Similar Messages:
Feb 25, 2011
when we go for client and server side state management in asp.net
View 2 Replies
Jun 15, 2010
I am having a ASP.net application it having three pages ,page 1,page 2,page 3,when the user navigating between this pages I want to maintain the view state in page level after postbacks(i.e.) .If a user visits page 3, passing some query loads some data .then he moves to page 1 doing some entries .after that he once again moves to page 3 now I want to display the data previously available at the time he moves to page 1, same
way I want to do to my three pages up to the user logging out.
View 8 Replies
May 26, 2010
I am getting this error while executing my Asp.Net application.i am not able to execute application using Visual Studio Interface and when i am trying to execute application from Local IIS. its executing well but when i am trying to click any button for searching etc it is giving this error. The state information is invalid for this page and might be corrupted. The detailed information is
[Code]....
[FormatException: Invalid character in a Base-64 string.] System.Convert.FromBase64String(String s) +0 System.Web.UI.ObjectStateFormatter.Deserialize(String inputString) +72 System.Web.UI.ObjectStateFormatter.System.Web.UI.IStateFormatter.Deserialize(String serializedState) +4 System.Web.UI.Util.DeserializeWithAssert(IStateFormatter formatter, String serializedState) +37 System.Web.UI.HiddenFieldPageStatePersister.Load() +113[ViewStateException: Invalid viewstate. Client IP: 127.0.0.1Port: 1307User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.1.249.1064 Safari/532.5ViewState: 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...][HttpException (0x80004005): The state information is invalid for this page and might be corrupted.] System.Web.UI.ViewStateException.ThrowError(Exception inner, String persistedState, String errorPageMessage, Boolean macValidationError) +106 System.Web.UI.ViewStateException.ThrowViewStateError(Exception inner, String persistedState) +14 System.Web.UI.HiddenFieldPageStatePersister.Load() +217 System.Web.UI.Page.LoadPageStateFromPersistenceMedium() +105 System.Web.UI.Page.LoadAllState() +43 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +6785 System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +242 System.Web.UI.Page.ProcessRequest() +80 System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context) +21 System.Web.UI.Page.ProcessRequest(HttpContext context) +49 ASP.pages__cmtickets_cmtickets_reports_cmtickets_search_aspx.ProcessRequest(HttpContext context) in c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Filesapp_mobily_alexmare1eddc658e6f2ba5App_Web_b9acfmsy.14.cs:0 System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +181 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +75
Version Information: Microsoft .NET Framework Version:2.0.50727.3603; ASP.NET Version:2.0.50727.3082
View 3 Replies
May 30, 2010
i want to save the recent state of all controls against a button1 click event. e.g. recently selected item of a dropdownlist should persist selected when user loads page next time, if he/she had clicked button1 before leaing this page. And same for allother controls on this page.
View 1 Replies
Dec 30, 2010
I have created a matser page with a two radio buttons, text box and a button. Whenever user sets some values to these control and clicks the button, i will navigating him from one content page to another based on the data he has entered. The problem is after the content page load, the values selected/given in the controls(radio button, text box) are getting cleared.
Is there some way to maintain the values ?
View 8 Replies
May 29, 2010
I am doing a POC of making my website run faster. Currently it stores huge object data in Session while passing information from one page to another. What I was thinking is to use shared methods and properties instead of session. It works, but wanted tocheck if this is an optimum way to do it. Below is the code that does not use session but still pass object data from one page to another:
[code]...
View 1 Replies
Aug 16, 2010
i need to know the full concepts state manegemnt in asp.net,..in which site i will get the correct concept for state management....
View 4 Replies
Sep 18, 2010
Here is my scenario.In default.aspx page user selects the country, state, city from drop down list, and store them in cache for further use. but when other user open the web site from other computer it shows the same country, state, and city selected by user 1. Is there any problem related to cache? I have stored data as following.
cache["ctryID"] = ctryID;
cache["stateID"]= stateID;
cache["cityID"]= cityID;
I want to show default country, state , city at page load of default.aspx
View 2 Replies
Oct 2, 2010
User Interface: 2 Labels; 1 Buttons
Requirements: Create a Web Page in ASPx that will do the following:
1)One label will provide a count of how many times Button 1 has been clicked in the current session.
2)One label will provide a count of how many times Button 1 has been clicked by all users of the application. The Application Code for the Button should start at 100 (set this in the Global.asax file). this is what i have so far but i cant seem to get the application state to work properly.
aspx.vb
Partial Class _Default
Inherits System.Web.UI.Page
Dim clickcount As Integer
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
If Session("ClickCount") Is Nothing Then
clickcount = 0
Else
clickcount = CInt(Session("ClickCount"))
End If
If Not IsPostBack Then
If Request.Cookies("UserName") IsNot Nothing Then
Label1.Text = "Welcome Back " & Request.Cookies("UserName").Value & "."
End If
End If
Dim clickCounta As Integer = CInt(Application("ClickCount"))
End Sub
Protected Sub PostBackSession_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles PostBackSession.Click
clickcount += 1
lblClkCnt.Text = "Current Click Count is " & clickcount
Application.Lock()
Dim clickCounta As Integer = CInt(Application("ClickCount"))
clickCounta += 1
Application("ClickCount") = clickCounta
Application.UnLock()
AppClick.Text = clickCounta
Dim nameCookie As New HttpCookie("UserName", _
TextBox1.Text)
nameCookie.Expires = Now.AddYears(1)
Response.Cookies.Add(nameCookie)
End Sub
Protected Sub PostBackSession_PreRender(ByVal sender As Object, ByVal e As System.EventArgs) Handles PostBackSession.PreRender
Session("ClickCount") = clickcount
Application("ClickCount") = clickcount
End Sub
End Class
global.asax
<script runat="server">
Sub Application_Start(ByVal sender As Object, ByVal e As EventArgs)
Dim clickCounta As Integer = CInt(Application("ClickCount"))
Application.Add("ClickCount", 0)
End Sub
Sub Application_End(ByVal sender As Object, ByVal e As EventArgs)
Dim clickCounta As Integer = CInt(HttpContext.Current.Application("ClickCount"))
End Sub
Sub Application_Error(ByVal sender As Object, ByVal e As EventArgs)
' Code that runs when an unhandled error occurs
End Sub
Sub Session_Start(ByVal sender As Object, ByVal e As EventArgs)
End Sub
Sub Session_End(ByVal sender As Object, ByVal e As EventArgs)
End Sub
View 3 Replies
Nov 5, 2010
Customer were getting "View State Validation Error" due to worker process recycling at our production webserver and to fix that i applied machinekey and then move my Session state Mode from In Proc to State Server to retain session data and not kick out the customer to relogin. I had serialization issue with one object which has to be stored in session but when i moved it out of session i could able to resolve the issue.
But doing all these i was partly successfull in keeping the user in their session when Worker Process recycle event occurs.I was able to refresh the page or make a post back by clicking the refresh button and also able to retain the session values. But the Problem occurs when sending asynchronous request to server which we do periodically every 15 minutes from the moment the user logs in.The web page doesnot update data on website when sending asynchronous request.By Debugging I found at this particular code point it fails to make a postback which is required.
<%=GetHintFromServer%> (When there is no Worker Process recycle i t gets replaced by
WebForm_DoCallback('__Page',message,ShowHint,null,null,false) on postback) Everything works fine when there is no Worker Process Recyling but when it happens looks like sending request asynchronously using javascript fails .Remember When I make a post back by manually clicking submit button everything works fine.
SendRequest(Asynchronous)
function SendRequest(msg, isBusy, chartMsg, vesselMsg)
{
try
{
//confirm("msg"+msg+"isBusy"+isBusy+"chartMsg"+chartMsg+"VesselMsg"+vesselMsg);
_busy = isBusy;
if(chartMsg != null)
{
//confirm("chartMsg"+chartMsg);
_element.SetMessage(true, chartMsg);
}
if(vesselMsg != null)
{
confirm("chartMsg"+vesselMsg);
_element.ShowVesselLoading(true, vesselMsg);
}
_stuckWatchdog = setTimeout( "ClearPendingRequest();", 60000);
var message = msg;
var context = '';
<%=GetHintFromServer%>
}
catch(e)
{
alert( "Exception error on SendRequest(): " + e);
}
}
View 2 Replies
Dec 22, 2010
Let me explain, describing the scenario:In a custom server control (in my case, derived from CompositeControl), in the overidden CreateChildControls method I create a complex tree of subcontrols, using information from a db.The db provides both information on which controls I need to create (the user interface's structure) and the data used to fill these controls.Than the user can interact with the control and change the data (that becomes different to what stored on db).
My custom control lives in the same page where there are other controls, obviously.And these controls can cause a postback at any time.What I need is that my custom control keeps the data entered by the user across these postback, without reverting to the original data and loose the user data entry.
Here is the first doubt:
1)I create the subcontrols dinamically in the CreateChildControls at any page refresh (both on first call than on postback).I know that the framework solves the reference between the posted data and the controls I create in the CreateChildControls in order to set properties and raise control events, but can you tell me when and how it actually does this? In which phase of page life cycle? What happens after the CreateChildControls?
A second doubt:2)If the user interface structure must change as a consequence of the data entered, I had to execute CreateChildControls twice (the first time to recreate the original interface to get the events and the second time to create the new interface)
In which phase of page/control lifecycle do I have to make the second call to CreateChildControls? I do it on Prerender now, but is it right or wrong, and why?
View 1 Replies
Dec 12, 2010
I am new to .net 4.0 and am using EF Model and SessionState Mode=SqlServer and I am getting this error below:
Unable to serialize the session state. In 'StateServer' and 'SQLServer' mode, ASP.NET will serialize the session state objects, and as a result non-serializable objects or MarshalByRef objects are not permitted. The same restriction applies if similar serialization is done by the custom session state store in 'Custom' mode.
I checked the stack trace and its complaining about
[assembly: global::System.Data.Objects.DataClasses.EdmSchemaAttribute()]
[assembly: global::System.Data.Objects.DataClasses.EdmRelationshipAttribute("PoplarGroveModel", "tblMenuRole", "tblMenu", global::System.Data.Metadata.Edm.RelationshipMultiplicity.Many, typeof(PoplarGroveDataModel.Menu), "tblRole",
[Code].....
I marked it as serializable but then it complains about System.Data.Objects.ObjectContext is not marked as serializable and hence throws the same error.
View 1 Replies
Apr 5, 2010
Our ASP.NET App uses ASP State Session Management and has been rebuilt about 2 years ago [With .NET Framework 2.0]. We are currently in .NET framework 3.5 and have moved to SQL Server 2008 - but continue to use the same ASPState database. The State database has been upgraded to SQL Server 2008. Since then we have are seeing timouts/locks on ASPStateTempSessions table. I am wondering if we have to rebuild this database from scratch with some newer scripts?
View 2 Replies
Jan 21, 2011
I'm using the following line of code to display the number of users currently logged on:
lblNoOfUsers.Text = Membership.GetNumberOfUsersOnline().ToString()
I'm still debugging my application so it's on the local server. As I debug and stop then debug again, eventually lblNoOfUsers.text turns to "0" instead of "1", even as I'm navigating my application. It only turns to "1" again if I log out and sign back in. It's almost as though Membership.GetNumberOfUsersOnline my login are referencing two different session states. How is this possible? Does asp.net create a new session state cookie each time I start debugging?
View 2 Replies
Feb 2, 2011
I am trying to set a session variable in the global.asax file and keep running into the problem that the Session is null.
I am running my application in VS2008 and using asp.net 3.51.
Here is my code:
1. In my web.config file I have enabled the session state and added the following line;
<sessionState
cookieless="false"
mode="InProc"
timeout="60"
></sessionState>
2. In the Session_Start procedure in the Global.asax file I set the session variable to a default value.
[Code]....
My problem seems to be that when the Application_Error procedure is executed the session state is lost.
Does anyone know why the session state isn't available in the Global.asax file.
View 9 Replies
Nov 1, 2010
All we have a global ships position tracking website which runs smoothly until IIS application pool recycles.When there is workerprocess recycling looks like session state expires as a result i loose all session data and when customer clicks refresh button he is redirected to login page.
In web.config Session state mode is set to InProc so i changed it to State Server but to my luck i have MAP object which is not serialiazable which is causing the maps from not appearing on the website.I tried adding serializable attribute to the object class but still not succesfull.Our website is accessed by our customers whose count is more than 1000.
Changing the session state mode from InProc to StateServer can really slow down the response time so
Is it good to go further fix the serailizable issues and move to state server?.
Is there any way I can retain my session data when application pool recyles?..
Stopping Application pool from recycling may not be a good idea considering health factor of web server.
View 8 Replies
Oct 1, 2010
i have one method which save datatable in viewstate.i am calling this method in. page_load2. Prerenderthe page was every heavy,i did tracing of page i found due to calling of method from preprnder it doubled the viewstate sizewhat was the reseon behind this.
View 2 Replies
Apr 29, 2010
I have a clear button and a textbox in an aspx page. I set the session variable in this page as
String str = Textbox1.Text;
Session["TypeIds"] = str;
and I clear the sessions in a clear button event as
Session["TypeIds"]=null;.
Then when the user types some value in the textbox ,on Response.Redirect on another aspx page, the session variable returns null values.It does not retain its session state. The session state has to be maintained in the next page. Is it because this clear button event and setting explicitly to null creates this problem?
View 7 Replies
Oct 27, 2010
The fix for this error message is to run [Code]..... I have run that uptown, downtown and in my lady's chamber and it does no good, although it never complains. Are there any other possibilities?Details:
IIS Server: v5.1 running on XP. SQLServer 2005 running on a different XP box.Microsoft .NET Framework Version:2.0.50727.3615; ASP.NET Version:2.0.50727.3618 There is an ASPState database on the server, containing only two tables: [Code].... and [Code]..... I did not use [Code].... when I ran [Code]....
.
View 2 Replies
Dec 3, 2010
I am building a web app that is limited to one database, therefore I cannot use the ASP.NET config tool. As a quick means of getting this app online, I tried to use a simple session variable. The login page verifies the user's credentials, and if they pass, it sets the session variable to a certain value. All other pages check in the page_load event whether or not the session variable is equal to that value. The problem is that once being logged in for a short while and sending and recieving some data, the session variable resets, and I'm returned to the login page to repeat the process. Here's the basic code from my webforms:
[code]....
Is there some setting I need to change in the web.config file to adjust the cookie timeout or is that only for the config tool authentication methods?
View 5 Replies
Feb 23, 2011
I am very new to asp.net. I developed one application. In that I have two pages. First page contains Application.Get() in page load event, here I read this Application variable, initially it returns NULL. If it is NULL, I make some buttons invisible. Then I jump to second page, in that page contains Application.Set(). Again I jump from second page to first page, this time Application.Get() is not NULL, I make some buttons visible.This is ok, if I execute the program in .net software.
But, when I publish this same program to web server like IIS, it is not working properly. After publishing very first time the first page returns NULL after that it doesnt return NULL even I closed the browser. I dont know why. In program, I used 2.0 framework. IIS also has 2.0 framework. Please clear this issue.
View 6 Replies
Feb 13, 2011
Just wanted to know in which type of web applications we can use or its good to use the out proc (SQL Server, State Server) session mode?
View 4 Replies
Mar 16, 2011
I write a simple web site in asp.net. In one page i want to delete a folder of web root. When i delete it folder, the all session in project is changed to null. I write a post in this forum. Here is the adress of it post: ([URL]) Some pepole answer me to change the session state mode to StateServer. In default the session state mode is Inproc, and i changed the session state mode to stateServer.but when i changed the session to stateserver this error is appear in application eventlog after two day and my web site dont working in iis. This error is like this:
Event Type:
Warning
Event Source:
ASP.NET 2.0.50727.0
Event Category:
Web Event
Event ID:
1310
Date:
3/12/2011
Time:
1:27:55 PM
User:
N/A
Computer:
WIN2003-00A346F
Description:
Event code: 3009
Event message: Unable to make the session state request to the session state server. Details: last phase='Sending request to the state
server', error code=0x80072749, size of outgoing data=0
Event time: 3/12/2011 1:27:55 PM
Event time (UTC): 3/12/2011 8:57:55 AM
Event ID: a5c8bfd16f74429e820989e8ce8082d0
Event sequence: 10
Event occurrence: 1
Event detail code: 50016
Application information:
Application domain: /LM/W3SVC/1547208020/Root-1-129443938731955000
Trust level: Full
Application Virtual Path: /
Application Path: C:InetpubwwwrootClishareClishare
Machine name: WIN2003-00A346F
Process information:
Process ID: 1276
Process name: aspnet_wp.exe
Account name: WIN2003-00A346FASPNET
Exception information:
Exception type: HttpException
Exception message: Unable to make the session state request to the session state server. Please ensure that the ASP.NET State service is started and that the client and server ports are the same. If the server is on a remote machine, please ensure that it accepts remote requests by checking the value of HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesaspnet_stateParametersAllowRemoteConnection. If the server is on the local machine, and if the before mentioned registry value does not exist or is set to 0, then the state server connection string must use either 'localhost' or '127.0.0.1' as the server name.
Request information:
Request URL: [URL]
Request path: /main/home.aspx
User host address: 64.79.69.155
User:
Is authenticated: False
Authentication Type:
Thread account name: WIN2003-00A346FASPNET
Thread information:
Thread ID: 1
Thread account name: WIN2003-00A346FASPNET
Is impersonating: False
Stack trace: Custom event details: For more information, see Help and Support Center at [URL]. When i reset ASP.NET State service, the problem is fixed, but after one or two days, this problem apears again. What's the problem and how can i fix it? And how can i delete a folder in asp.net without the session is lost?
View 1 Replies
Sep 1, 2010
We have a web site that implements a custom SiteMapProvider using a User Control added in the master page. I need to be able to limit the sitemap nodes added depending on the logged in user, that is, certain users should not see certain sitemap nodes. Currently, the login processing code determines if users are in the certain category or role and then sets a value in session state, for example, Session["UserInRoleXXX"] = "Yes"; I tried changing the code in the user control to check the session state, but I got the following error: NullReferenceException ... Object reference not set to an instance of an object." Can session state be accessed in a user control?
View 6 Replies
