State Management :: How To Maintain User Log State
Mar 10, 2011
I have one web application. In that, I have two pages. One is view/edit page and another one is login page. The view/edit page contains one edit button and one login button.
First I execute view/edit page, at that time I dont want to show edit button. When user clicks login button, the page will be redirected to login page, where the user has to enter username and password. If user enters both correct, again the page will be redirected back to view/edit page. This time, the edit button has to be shown to make some modifications, since the user is authenticated.
I tried this thing by using session with cookieless. It works perfectly but some times it shows web page not available. I made session timeout 120 minutes and cookieless is true. In URL session ID also available.
So, whats the alternate way to maintain user log state or whats wrong in web.config file.
View 1 Replies
Similar Messages:
Jun 15, 2010
I am having a ASP.net application it having three pages ,page 1,page 2,page 3,when the user navigating between this pages I want to maintain the view state in page level after postbacks(i.e.) .If a user visits page 3, passing some query loads some data .then he moves to page 1 doing some entries .after that he once again moves to page 3 now I want to display the data previously available at the time he moves to page 1, same
way I want to do to my three pages up to the user logging out.
View 8 Replies
Oct 25, 2010
I have a system that has several large objects that need to be built and populated each and every time, and these objects may be accessed quite often as well. As a strategy, caching would not be that good for me because there are potentially thousands of these objects which are fairly large. So I propose to serialize the objects to the file system and then deserialize it when I need those objects again. I have several classes that need this serialization functionality.
These objects change as well, so on the next access I check if there were any changes and then I grab only the changes and edit the object, and then reserialize the object.
My question is what is the best way to do this, since I have several classes ..
View 2 Replies
Oct 12, 2010
I am working on vs. 2010. I have menu control in master page.
my menu having two pages default1.aspx, default2.aspx .
when user enter some values in default1.aspx page after click default2.aspx and enter some values
now if I click default1.apx page doesn't having values. but i want to maintain those values in my all pages .
View 1 Replies
Mar 4, 2011
I am using a treeview in my master page and every node having link to its container page.That means click on any child node of treeview its redirect to another page by taking some value.
Now every time I click on nodes of treeview, its get collaps when child page loaded...
Now regaring maintain state of treeview across my web application...
View 13 Replies
Sep 24, 2010
how can i maintain state in html as i am building site which has too much pages in html i can't convert them to aspx but due to some requirements i want to maintain state of variable.
View 3 Replies
Dec 30, 2010
I have created a matser page with a two radio buttons, text box and a button. Whenever user sets some values to these control and clicks the button, i will navigating him from one content page to another based on the data he has entered. The problem is after the content page load, the values selected/given in the controls(radio button, text box) are getting cleared.
Is there some way to maintain the values ?
View 8 Replies
Sep 1, 2010
We have a web site that implements a custom SiteMapProvider using a User Control added in the master page. I need to be able to limit the sitemap nodes added depending on the logged in user, that is, certain users should not see certain sitemap nodes. Currently, the login processing code determines if users are in the certain category or role and then sets a value in session state, for example, Session["UserInRoleXXX"] = "Yes"; I tried changing the code in the user control to check the session state, but I got the following error: NullReferenceException ... Object reference not set to an instance of an object." Can session state be accessed in a user control?
View 6 Replies
Mar 25, 2010
My prior asp.net apps used windows authentication on an intranet. Now I'm developing an app for the internet and am stumbling over how to properly manage user sessions and state.
I first developed my web site functionality; created the SQL DB and got all of the pages to properly handle the data. Then, I installed the SQL Membership database and was able to get the CreateUser, Login, Logout pages to work. On the Verify process for the Userid, I added a step that will take the membership UserId value and create a Company record in my tables and link my CompanyId key with the UserId.
At Login time, I create a CompanyId session variable; each page uses it to retrieve records for the user. When Session Timeout occurs and the user click a link to another page, the app redirects properly to a Login page. However, if the time expires and then the user interacts on that same page, 'Object not set to an instance of the object' - the CompanyId session variable has expired.
What is the proper way to handle this? I'd like the page to automatically redirect to a TimedOut page (this would happen automatically without the user doing anything).
I considered writing a Function where I pass the Session variable I want and the Function sees if it exists; if it doesn't it would do a Response.Redirect to the TimedOut page...I can't get the Redirect to work in a Class Function ('reference to a non-shared member...').
I assumed that I should set CompanyId as a Session Variable so each page knows the user to get data for. Another approach is to use the membership User and if it is still valid, do a DB lookup to get the CompanyId. I did not choose this because I felt that it would increase DB traffic and web traffic.
Here are several relevant settings from my web.config:
<sessionState cookieless="UseDeviceProfile" />
<authentication mode="Forms">
<forms loginUrl="~/UserTasks/Login.aspx" />
It feels like there should be a straightforward answer to this but I am missing it.
View 7 Replies
Aug 17, 2010
I have a requirement where i need to download mutiple files as a single zip file.There is linkbutton named HOME as well in the page. when this linkbutton is clicked it should redirect to homepage.aspx. I found a ICSharpCode.SharpZipLib.dll in net and used in my website. Here is the code
[Code]....
With the above code i got the expected result i,e. i can zip the files and save on client system. But the problem is after saving/canceling the zip file if user clicks on linkbutton in the page_load event Session[getdata] became null. there is no data in Session. what might be the problem? Actually it should redirect to homepage.aspx but its going to login.aspx because Session[getdata] is null.
View 4 Replies
Oct 25, 2010
I have to maintain session of two users on a sigle page.And the path is. UserPath:
1.User logins with his credentials((We retrive their credentials from login table) .
2.He invites some of his friends for a birthday party.
3.And send an url link to share some of the gifts with them in which gifts are provided in Share.aspx page.
4.Userlogouts.
Invites path:
1.Invite logs in with his credentials(We retrive their credentials from invites table).
2.He is directed to go to Share.aspx and list the items he require.
3.And he logs out.
Now i have problem in maintaining session for both the user and invite. How can i maintain the session so,that the user can identify a particular invite from the list of invites an his chosen items.
View 1 Replies
Dec 20, 2010
i dont know about Global.asax so give some information about it and also tell me about the implementation and use of session_start and session_end event. How to call Global.asax in our website.
View 5 Replies
Jun 6, 2010
i use html form and html control to submit data,like bellow:
[Code]....
after submit,the input email lost it's data,how to keep it?
View 6 Replies
Apr 19, 2010
I have "n" <tables></tables> on my page and each <table> has One(1) <asp:CheckBox.. Enable ='true"/> and "x" <asp:TextBox Enabled="false"..>. Each Table looks as follows
[Code]....
When I click checkbox, it calls javascript function and enables textboxes (I have added onclick attribute to checkbox). Page also has <asp:Button ...Text="Submit"/> whcih actually grabs the data from the textboxes on the page and send it to the databse. Here is the Onclick event of the <asp"button../>
[Code]....
If the exception is thrown , textBoxes are not reset but on postback textboxes appear as disabled (values are not reset)
So here is what happening on postback when exception is thrown
1) Values are not reset (that is what want)
2) Texboxes appear as Disabled (that is what I don't want on exception, REMEMBER I enable textBoxes using client side script)
How can I keep the textboxes enabled = "true"
View 4 Replies
Jul 23, 2010
I have a search page containing a collapsible panel with several controls including text, radio, drop list and check box. In the same page there is a gridview to display search result and links to other pages.Everytime I click on a link in the gridview, the viewstate is only maintained if I nevigate with the pagination of the gridview. However if I click on a link in the gridview and click the back button to the search, everything goes back to default, and the search results will be gone from the gridview. How may I enable the controls and the gridview to remain the same if I hit back button to it?
View 3 Replies
Oct 7, 2010
The above u mention with out session how to maintain the user value in that invitation page?
View 6 Replies
Oct 2, 2010
User Interface: 2 Labels; 1 Buttons
Requirements: Create a Web Page in ASPx that will do the following:
1)One label will provide a count of how many times Button 1 has been clicked in the current session.
2)One label will provide a count of how many times Button 1 has been clicked by all users of the application. The Application Code for the Button should start at 100 (set this in the Global.asax file). this is what i have so far but i cant seem to get the application state to work properly.
aspx.vb
Partial Class _Default
Inherits System.Web.UI.Page
Dim clickcount As Integer
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
If Session("ClickCount") Is Nothing Then
clickcount = 0
Else
clickcount = CInt(Session("ClickCount"))
End If
If Not IsPostBack Then
If Request.Cookies("UserName") IsNot Nothing Then
Label1.Text = "Welcome Back " & Request.Cookies("UserName").Value & "."
End If
End If
Dim clickCounta As Integer = CInt(Application("ClickCount"))
End Sub
Protected Sub PostBackSession_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles PostBackSession.Click
clickcount += 1
lblClkCnt.Text = "Current Click Count is " & clickcount
Application.Lock()
Dim clickCounta As Integer = CInt(Application("ClickCount"))
clickCounta += 1
Application("ClickCount") = clickCounta
Application.UnLock()
AppClick.Text = clickCounta
Dim nameCookie As New HttpCookie("UserName", _
TextBox1.Text)
nameCookie.Expires = Now.AddYears(1)
Response.Cookies.Add(nameCookie)
End Sub
Protected Sub PostBackSession_PreRender(ByVal sender As Object, ByVal e As System.EventArgs) Handles PostBackSession.PreRender
Session("ClickCount") = clickcount
Application("ClickCount") = clickcount
End Sub
End Class
global.asax
<script runat="server">
Sub Application_Start(ByVal sender As Object, ByVal e As EventArgs)
Dim clickCounta As Integer = CInt(Application("ClickCount"))
Application.Add("ClickCount", 0)
End Sub
Sub Application_End(ByVal sender As Object, ByVal e As EventArgs)
Dim clickCounta As Integer = CInt(HttpContext.Current.Application("ClickCount"))
End Sub
Sub Application_Error(ByVal sender As Object, ByVal e As EventArgs)
' Code that runs when an unhandled error occurs
End Sub
Sub Session_Start(ByVal sender As Object, ByVal e As EventArgs)
End Sub
Sub Session_End(ByVal sender As Object, ByVal e As EventArgs)
End Sub
View 3 Replies
Aug 9, 2010
In my Application_BeginRequest I have code that gets query string value ?c=FR or ?c=US and store it in cookies.Based on query string value I have either US or FR,locale is selected from locale table.If ?c=FR then locale will be fr-FR and if it is US then locale will be en-US.My code is below.
void Application_BeginRequest(object sender, EventArgs e)
{
LocalizationInfo loc = GetLocalizationInfo();
if (Request.Cookies["Localization"] == null)
Response.Cookies.Add(new HttpCookie("Localization"));
Response.Cookies["Localization"]["Country"] = loc.Country;
CultureInfo objCI = new CultureInfo(loc.Locale);
Thread.CurrentThread.CurrentCulture = objCI;
Thread.CurrentThread.CurrentUICulture = objCI;
}
public static LocalizationInfo GetLocalizationInfo()
{
string countryCode = "";
string sLocale = "";
if (HttpContext.Current.Response.Cookies["Localization"]["Country"] != null)
countryCode = HttpContext.Current.Response.Cookies["Localization"]["Country"];
if (!string.IsNullOrEmpty(HttpContext.Current.Request.QueryString["c"]))
countryCode = HttpContext.Current.Request.QueryString["c"];
if (countryCode == "")
countryCode = "US";
sLocale = HertzRent2Buy.DataProvider.ListData.GetLocale(countryCode);
LocalizationInfo ret = new LocalizationInfo();
ret.Country = countryCode;
ret.Locale = sLocale;
return ret;
}
public struct LocalizationInfo
{
public string Country;
public string Locale;
}
Now when I run the project and in query string I set [URL] then for the very first page(home page itself) it shows me French translation,but on subsequent page,that query string parameter ?c=FR is lost and hence it shows be English translation not French translation since it does not pickup French resx file.If I manually append ?c=FR in subsequent page then it shows the French translation.Is there is way how I can make that query stringparameter available in all pages.Structure is there to hold Country and locale variables. In all pages I am calling GetLocalizationInfo() method as follow
LocalizationInfo info = some.DataProvider.Globalization.GetLocalizationInfo();
And I create instance info to pass locale and country as parameter. GetProductDetails(id,info.Country,info.locale). why my query string parameters get lost on subsequent pages.
View 1 Replies
Feb 25, 2011
when we go for client and server side state management in asp.net
View 2 Replies
Aug 26, 2010
In my web application, I set the mode of session state as State Server and point to another server. After run some days, I always meet following exception:
The state server has closed an expired TCP/IP connection. The IP address of the client is 192.168.80.157. The expired Read operation began at 08/25/2010 14:18:03.
View 2 Replies
Nov 5, 2010
Customer were getting "View State Validation Error" due to worker process recycling at our production webserver and to fix that i applied machinekey and then move my Session state Mode from In Proc to State Server to retain session data and not kick out the customer to relogin. I had serialization issue with one object which has to be stored in session but when i moved it out of session i could able to resolve the issue.
But doing all these i was partly successfull in keeping the user in their session when Worker Process recycle event occurs.I was able to refresh the page or make a post back by clicking the refresh button and also able to retain the session values. But the Problem occurs when sending asynchronous request to server which we do periodically every 15 minutes from the moment the user logs in.The web page doesnot update data on website when sending asynchronous request.By Debugging I found at this particular code point it fails to make a postback which is required.
<%=GetHintFromServer%> (When there is no Worker Process recycle i t gets replaced by
WebForm_DoCallback('__Page',message,ShowHint,null,null,false) on postback) Everything works fine when there is no Worker Process Recyling but when it happens looks like sending request asynchronously using javascript fails .Remember When I make a post back by manually clicking submit button everything works fine.
SendRequest(Asynchronous)
function SendRequest(msg, isBusy, chartMsg, vesselMsg)
{
try
{
//confirm("msg"+msg+"isBusy"+isBusy+"chartMsg"+chartMsg+"VesselMsg"+vesselMsg);
_busy = isBusy;
if(chartMsg != null)
{
//confirm("chartMsg"+chartMsg);
_element.SetMessage(true, chartMsg);
}
if(vesselMsg != null)
{
confirm("chartMsg"+vesselMsg);
_element.ShowVesselLoading(true, vesselMsg);
}
_stuckWatchdog = setTimeout( "ClearPendingRequest();", 60000);
var message = msg;
var context = '';
<%=GetHintFromServer%>
}
catch(e)
{
alert( "Exception error on SendRequest(): " + e);
}
}
View 2 Replies
Dec 22, 2010
Let me explain, describing the scenario:In a custom server control (in my case, derived from CompositeControl), in the overidden CreateChildControls method I create a complex tree of subcontrols, using information from a db.The db provides both information on which controls I need to create (the user interface's structure) and the data used to fill these controls.Than the user can interact with the control and change the data (that becomes different to what stored on db).
My custom control lives in the same page where there are other controls, obviously.And these controls can cause a postback at any time.What I need is that my custom control keeps the data entered by the user across these postback, without reverting to the original data and loose the user data entry.
Here is the first doubt:
1)I create the subcontrols dinamically in the CreateChildControls at any page refresh (both on first call than on postback).I know that the framework solves the reference between the posted data and the controls I create in the CreateChildControls in order to set properties and raise control events, but can you tell me when and how it actually does this? In which phase of page life cycle? What happens after the CreateChildControls?
A second doubt:2)If the user interface structure must change as a consequence of the data entered, I had to execute CreateChildControls twice (the first time to recreate the original interface to get the events and the second time to create the new interface)
In which phase of page/control lifecycle do I have to make the second call to CreateChildControls? I do it on Prerender now, but is it right or wrong, and why?
View 1 Replies
Dec 12, 2010
I am new to .net 4.0 and am using EF Model and SessionState Mode=SqlServer and I am getting this error below:
Unable to serialize the session state. In 'StateServer' and 'SQLServer' mode, ASP.NET will serialize the session state objects, and as a result non-serializable objects or MarshalByRef objects are not permitted. The same restriction applies if similar serialization is done by the custom session state store in 'Custom' mode.
I checked the stack trace and its complaining about
[assembly: global::System.Data.Objects.DataClasses.EdmSchemaAttribute()]
[assembly: global::System.Data.Objects.DataClasses.EdmRelationshipAttribute("PoplarGroveModel", "tblMenuRole", "tblMenu", global::System.Data.Metadata.Edm.RelationshipMultiplicity.Many, typeof(PoplarGroveDataModel.Menu), "tblRole",
[Code].....
I marked it as serializable but then it complains about System.Data.Objects.ObjectContext is not marked as serializable and hence throws the same error.
View 1 Replies
Apr 5, 2010
Our ASP.NET App uses ASP State Session Management and has been rebuilt about 2 years ago [With .NET Framework 2.0]. We are currently in .NET framework 3.5 and have moved to SQL Server 2008 - but continue to use the same ASPState database. The State database has been upgraded to SQL Server 2008. Since then we have are seeing timouts/locks on ASPStateTempSessions table. I am wondering if we have to rebuild this database from scratch with some newer scripts?
View 2 Replies
Jan 21, 2011
I'm using the following line of code to display the number of users currently logged on:
lblNoOfUsers.Text = Membership.GetNumberOfUsersOnline().ToString()
I'm still debugging my application so it's on the local server. As I debug and stop then debug again, eventually lblNoOfUsers.text turns to "0" instead of "1", even as I'm navigating my application. It only turns to "1" again if I log out and sign back in. It's almost as though Membership.GetNumberOfUsersOnline my login are referencing two different session states. How is this possible? Does asp.net create a new session state cookie each time I start debugging?
View 2 Replies
