I have a web application which will send email when user changes his/her passwords and also some invitation emails from the webpage.I have used VS2008 to develop this application. On my development machine the emails are send using the provided credentials as follows:
[Code]....
my website sends email just fine on another host. I should not really have to change anything to make it work on this webhost. However, I have followed the instructions for this host and it is not working. Here is my current web.config.
[Code]....
I am getting my mail message printed at the top of my browser with the correct information. Why isn't this going through the mail server?
I have my code here, it works fine from my home, where my user is administrator, and I am connected to internet via a cable network.
But, problem is when I try this code from my work place, it does not work. Shows error:
"unable to connect to the remote server"
From a different machine in the same network:
"A socket operation was attempted to an unreachable network 209.xxx.xx.52:25"
I checked with our network admin, and he assured me that all the mail ports are open [25,110, and other ports for gmail].
Then, I logged in with administrative privilege, there was a little improvement, it did not show any error, but the actual email was never received.
note that, the code was tested from development environment, visual studio 2005 and 2008.
try
{
MailMessage mail_message = new MailMessage("xxxxx@y7mail.com", txtToEmail.Text, txtSubject.Text, txtBody.Text);
SmtpClient mail_client = new SmtpClient("SMTP.y7mail.com");
NetworkCredential Authentic = new NetworkCredential("xxxxx@y7mail.com", "xxxxx");
mail_client.UseDefaultCredentials = true;......
I want to send email without declare username and password in smtp server. I am using asp.net c#, this is possible in asp below is the code , anybody tell me how can i use this code in asp.net.
<%
Dim ObjSendMail
Dim iConf
Dim Flds
Set ObjSendMail = Server.CreateObject("CDO.Message")
Set iConf = CreateObject("CDO.Configuration")....
i am trying to send emails to internal as well external email id(like gmail,yahoo,rediff etc.) .but the problem is that i can send the email to internal email id and recieve it but when i try to send the mail to external email id iam not able to receive the email. the process runs fine cause no errors are occurring.
SmtpClient emailClient;
emailClient = new SmtpClient("80.0.0.120", 252);
MailMessage message = new MailMessage("a.b@abc.com", a.b@glass.com", "Report", "Dear All,");
message.IsBodyHtml = true;
message.Body ="Dear All,"+"<br/>"+ "Please find the attached file.";
System.Net.Mime.ContentType mimeType = new System.Net.Mime.ContentType();
message.Attachments.Add(new System.Net.Mail.Attachment("Report.xls", mimeType));
emailClient.Credentials = new System.Net.NetworkCredential("a.b", "pass123");
emailClient.UseDefaultCredentials = false;
emailClient.Send(message);
emailClient = null;
message.Dispose();
module thats available for asp.net that uses a queue to send email to an smtp server? the queue being the operative word here.. we need a proper fallback mechanism for storing any messages that can't be sent so that the send can be re-attempted later
View 1 RepliesGot Error while tried to send email through smtp
my code is >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Protected Sub Submitbutton_Click(sender As Object, e As System.EventArgs) Handles Submitbutton.Click
Dim EMail1 As New MailMessage
EMail1.From = New MailAddress("Receiver")
EMail1.[To].Add(New MailAddress("Sender"))
EMail1.Subject = Firstnametextbox.Text + lastnametextbox.Text + "Register "
EMail1.Body = " This is content "
[Code] .....
I want to send emails using SMTP server in ASP.Net. I amusing C#
View 1 RepliesI have the following form and trying to click a button and email through an SMTP server.
[Code]....
Code behind:
[Code]....
Web.config file:
[Code]....
I have configured gmail's free smtp server for my web app and previously I was using smtp server configured at the server.
So I have changed my smtp settings accordingly but my app isn't sending any email and giving me error connection time out, third party tool isn't responding after many retrials.
Here are my settings-
SmtpClient smtpClient = new SmtpClient("mail.MyWebsiteDomainName.com", 25);
smtpClient.Credentials = new System.Net.NetworkCredential("info@MyWebsiteDomainName.com", "myIDPassword");
smtpClient.UseDefaultCredentials = true;....
I am trying to send an email using an exchange smtp authentication. I have set the username, password, and domain and converted them to base 64 but I get an error message:-
Mailbox unavailable. The server response was: 5.7.1 Unable to relay
I have been trying to get this to work for months now and just can't seem to find the answer.
SMTP is a whole new ballgame for me, but I am reading up on it.
I am attempting to send email from my EC2 instance using GoDaddy's SMTP server. My domain name is registered through GoDaddy and I have 2 email accounts with them.
I can successfully send the email from my dev box no problem.
my web.config
[code]....
I have a feeling I'm just missing something fundamental. I also have a feeling someone is going to recommend I use AuthSmtp or something similar, I'll agree, and have had wasted the past 6 hours
i have made application...that can have numbers of Event on Specified Date, So i want to code tat when time for event is arrived so tat automatically the participant get information about the event..so i want to send email to all participant before a day.
View 3 RepliesI am not able to send a mail using my smtp detail with C#.
I am using all my smtp credentials for sending a mail but its not sending mail,displaying exception like Mailbox unavailable........
i am looking for a solution from last 3 days,
SmtpClient client = new SmtpClient();
client.Host = "mail.abc.com";
client.DeliveryMethod = SmtpDeliveryMethod.Network;
client.Credentials = new System.Net.NetworkCredential("xxxxx", "qqqq");
[Code].....
this is the code i am using.
<mailSettings>
<smtp from="sales@rrrrr.com" deliveryMethod="Network">
<network host="mail.abc.com" password="qqqq" port=25 userName="xxxxx"/>
</smtp>
</mailSettings>
i want to send an email using authenticate smtp server with port number(For Example SMTP Server is :
192.168.0.8 and port : 587).
i got lots of example but failed to find smtp server with port number using authentication.
a couple weeks ago, my ASP.NET website stopped sending user comments which I implemented by emailing those comments to my email account through Gmail SMTP server [URL]. I opened the project on my development machine and again it fails to send the email after a couple minutes with the following exception message:
Failure sending mail
Unable to read data from the transport connection: net_io_connectionclosed.
I'm using Gmail's SMTP with port 465, and MailClient.EnableSSL = True.
The weird thing is my Office Outlook 2007 is using the same settings and it doesn't have any problems sending mail using the same Gmail account.
once user answers security question and clicks submit that you can then re direct them to a new page and display their password on screen? rather than send an email?
View 1 Repliesi'm trying to send email through gmail account
i get this error:
The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1 Authentication Required. Learn more at
web config is like below:
[Code]....
and my code :
[Code]....
I can not send mail, this error means ?
Code:
using (MailMessage mm = new MailMessage("soporte@linknred.com", correo1.Text.Trim()))
{
mm.Subject = "Activacion de Cuenta";
string body = "Hola " + correo1.Text.Trim() + ", " + "Bienvenido a LinknRed";
body += "<br /><br />Por Favor haz Click en el Enlace Siguiente Para Activar Tu Cuenta";
[Code] ....
I am trying to send an email from asp.net using a google apps email.
I found this question which did not resolve the issue
Send Email via C# through Google Apps account
The part that I am really confused about is that it works with these settings
<smtp from="****@gmail.com" deliveryMethod="Network">
<network host="smtp.gmail.com" port="587"
userName="****@gmail.com" password="****"[code]....
and get the following error message
"The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1 Authentication Required."
I found this article as well http://www.google.com/support/forum/p/Google+Apps/thread?tid=2cbb54572fea6939&hl=en and worked through this but that did not resolve me issue either.
I have a strange problem with sending email via asp.net.
I adding to my email an attachment with long name ("Xxxxxxxx ąę łóxxxx yyyyyyyyyńęąąyy bbbbbbbbbb b wwwwwwwww wwwwwww ooooooooo" - polish chars included). Next I receiving that email with that file but I can't read the file. There is like damaged, with different name - ""=_utf-8_B_WHh4eHh4eHggxIXEmSDFgsOzeHh4eCB5" and the file size is a little bigger.
I am trying to send a simple email through the following code:
protected void email_Click(object sender, EventArgs e)
{
System.Net.Mail.MailMessage msgMail = new System.Net.Mail.MailMessage();
msgMail.From = new System.Net.Mail.MailAddress("veerab@orbees.com");
msgMail.To.Add(new System.Net.Mail.MailAddress("murthyp@orbees.com"));
msgMail.Subject = "Request:Joing into the myitem.Title.ToString()";
msgMail.IsBodyHtml = true;
string strBody = "test mail";
msgMail.Body = strBody;
System.Net.Mail.SmtpClient client = new System.Net.Mail.SmtpClient();
}
I have installed the SMTP server on my local machine. The folders in mail root have all the permissions. My mails stay in the Queue folder for sometime and then they go to the Badmail folder. I am receiving the following error: Unable to deliver this message because the follow error was encountered: "This message is a delivery status notification that cannot be delivered.". The specific error code was 0xC00402C7. The message sender was <>. The message was intended for the following recipients.
I'm having some trouble with the asp.net FileUpload Control and sending email attachments.
I am able to run the following code and successfully create and attach 1 attachment to an email send mail it to myself with no problems.
[Code]....
I need to be able to handle multiple files and I am also saving the files to an sql database. I tried using multiple file upload controls (max 3) and can save the files to the database successfully, but any and all attachments that are emailed, appear corrupted in my inbox. So, I removed all the fileupload controls and left just on on the page. I created a generic List<Attachment> to store the attachments created from the fileupload control and then iterate through all entries and attach them to my email and save them to the database. Once again, saving to the database works perfectly and i can read the attachments back, but the email attachments are corrupt. Is there anything obvious that I am doing wrong?
[Code]....
I want to mail from
Emilfrom:support@foodtrove.in
Pass:*******
smtp server:smtp.foodtrove.in
pop server : pop.foodtrove.in
I tried to send smtp but fail
try {
using (MailMessage mm = new MailMessage()) {
mm.Subject = "Account Activation";
string body = "Hello";
mm.From = new MailAddress("support@foodtrove.in");
body += "<br /><br />Please click the following link to activate your account";
[Code]....
but catch exception service not available error ...
I'm trying to send an email from my ASP.NET website using the following code (obviously replacing the hostname, username and password with the actual values):
Public Shared Sub Send(ByVal ToEmail As String, ByVal FromEmail As String, ByVal Subject As String, ByVal Message As String)
Dim mm As New MailMessage(FromEmail, ToEmail, Subject, Message)
Dim smtp As New SmtpClient("hostname")
smtp.Credentials = New NetworkCredential("username", "password")
smtp.Send(mm)
End Sub
When trying to send out the mail I'm receiving this error: "Unable to read data from the transport connection: net_io_connectionclosed."
