VS 2010 Dynamic UserControl - Postback Event Not Firing
Feb 8, 2012
I have a page where I add a dynamic user control in the Page_Load event based on criteria.
The control is a simple form with a save button. The problem is the _Click event never fires for the button. It will postback the main page the control is within, but not the code behind for the control...so I never get the button click even, and therefor can't execute the save code.
Tried it in the init, tried adding the control to a placeholder, tried a lot of various things but nothing seems to work.
Code:
If cb_business_profile.Items.Count = 0 Then
Dim u_pnl_content As UpdatePanel = Page.FindControl("u_pnl_content")
u_pnl_content.ContentTemplateContainer.Controls.Clear()
Dim business_profile_detail As Control = LoadControl("~/controls/business_profile_detail.ascx")
i have a very strange issue with a user control we are dynamically loading on an asp.net web page(.net 2.0). the user control has 3 dropdowns, one of which has a selectedindexchanged event attached to it (which loads the third dropdown with a set of values).
the weird thing is, if there are currently any invalid fields (where field validators have been activated) in other parts of the form, when you go to select the drop down in question on the FIRST change it does nothing, but then when you change the index again it works perfectly! i dont understand how the event wont fire for the first change, but for every change thereafter.
However, if all these fields are filled in correctly above the usercontrol, it fires off the selectedindexchanged event correctly.
in regards to validation i have disabled ALL POSSIBLE validation in order to try and eliminate it as a culprit, so i dont understand how validation can be affecting the usercontrol.
Here I have gridview control with checkbox for selection of one or two records. Have one button and when clicking this , i need to get the selected records values and assign this values to the textbox which is in usercontrol1.
I have a user control that has an event that checks if a textbox is empty and does other processing...this event would also set a publ;ic property on the user control to a boolean value.
1) On the host page/parent, I want to click a button that will set off the event explained above.
2) Also, how do I reference the user control on the host page?
I have a DetailsView control bound to an ObjectDataSource within a User Control (.ascx). It appears that the DetailsView.OnDataBound event is being fired on every page load or postback.
I do not see this behavior with a similiar DetailsView directly placed on an aspx page.
I created a usercontrol I use to build up a list of at runtime. Each instance represent one category, and it will have a title, description and a button taking the user to the page displaying all articles for that category.
The control's members:
Code: public string Title { get; set; } public string Description { get; set; } public int CategoryId { get; set; }
I have a custom class (ServerSideValidator.vb) that validates user input on server side (it doesn't use any of the .NET built in validators, therefore Page.Validate() is not an option for me). I am calling the Validate() method on page.IsPostback event and the class performs without any problem
My issue is, when validation fails (returns false), I want to stop the postback event handler from firing, but load the page along with all the controls and user-input values in them. If I do, Response.End(), the page comes up blank. I can programmatically instruct the page to go to the previous page (original form before postback), but it loses all user-inputs.
I thought of creating a global boolean variable in the page code behind file and check the value before performing any postback method, but this approach takes away from my plan to provide all functionalities inside the class itself. The page object is being referenced to ServerSideValidator.
Seems like all the postback related properties/variables I come across inside Page class are 'Readonly' and I can't assign value(s) to control/prevent postback event from firing.
i am using VWD(visual web developer 2008) and DOTNET 3.5
i have a page on which i dynamically add multiple datalist controls on the oninit event of my page , on postabck i again add all these datalist controls to the page on oninit event
the template for all the datalist controls is defined using the ITemplate interface, the template defined for each datalist control contains a button which has a event handler attached to onclick event.
the problem is first time i click the button on postback i add the multiple datalist controls , the event gets fired which modifies the datatable i am using to generate my datalist controls and the datalist controls with the modified data show on the page but the second time a user clicks the button inside datalist the event does not get fired.
I'm creating a next/previous function for my repeater using pageddatasource. I added the link button control dynamically in my oninit using the following code.
LinkButton lnkNext = new LinkButton(); lnkNext.Text = "Next"; lnkNext.Click += new EventHandler(NextPage); if (currentPage != objPagedDataSource.PageCount)
[Code]....
So I am incrementing the cookie I am using to track the page number and then rebinding the repeater.
Here is the main issue. The first time I click Next, it works, it goes to Page 2 without any problems. When on Page 2, I click Next, it goes back to Page 1. Seems like the Next event is not wiring up properly.
In the UserControl I am adding dynamic ImageButtons depending on the condition When the page loads and I click on Edit button I have no problems and btnEdit_Click is fired. But after that (btnEdit id removed and btnSave is added) when I click on btnSave the btnSave_Click event does not fire. What could be the problem?
I have a control which has an ImageButton which is tied to an OnClick event... Upon clicking this control, a postback is performed and the event handler is not called. AutoEventWireup is set to true, and I've double checked spelling etc.... We haven't touched this control in over a year and it has been working fine until a couple of weeks ago.
We have made changes to controls which load this control... so I'm wondering, what kind of changes could we have made to stop this event handler from being called? There is quite a bit of Javascript going on, so this could be the culprit too...
I have a web application that shows a page containing between 6 and 20 UpdatePanels, contained with Custom Web (.ascx) Controls.
You can see an example of such a page here: [URL]
The problem I'm getting is that when the user FIRST clicks any of the radio-buttons on any of the controls in the page, ALL the radio buttons that have an active selection ALSO fire an rb_CheckChanged event (see application log below). On subsequent radio-button clicks, only that RB fires the event (as expected).
This behaviour is having a dramatic impact on performance. The page loads quickly, and a "normal" RB click provides an AJAX update correctly within 1 second. The problematic first RB click, however, takes up to SIX seconds to process, which is unacceptable from a user experience standpoint.
Developed in VS.NET 2008, ASP.NET 3.5. Also I converted the "Web Site" solution to a "Web Application" (pre-compiled) and got the same performance (still too slow). Release builds run only marginally faster than debug builds.
Why would a single RB selection change cause all RB's that have a "selection" set on them to also fire? (The "selection" is determined through database settings every time the control is populated, which is called from within the parent page control's Page_Load function. This selection is determined also at first page load, since all the controls get populated then, so why would the clicking of an RB cause them all to fire an event, and only once? That's what I don't get...)
we are having some weird issues with URL Routing in ASP.NET 3.5.
We have a search box that does a search and redirects to a routed URL.
When we search for the first time (aka Press a button that forces a postback) everythign works as expected. we get:
1. BeginRequest event.
2. Determines Route
3. Calls Routehandler to match the route item to the actual destination page
4. Routes the url appropriately.
After you do one search successfully and try again it fails to call the BeginRequest event. Because of this the routing data never gets called and so the url is never routed to its correct destination. What is weirder still if we append a "/" (trailing slash) to the url after the initial postback it DOES work properly again.
So our search route looks like this
mydomain.com/Search
entering a term and pressing the SEARCH button would yield a result url like this:
mydomain.com/Search/Results/MySearchTerm
Going back (after 1 successful search) you then need to use this url or else BeginRequest will never fire:
mydomain.com/Search/ < (note the extra "/" at the end)
why the BeginRequest event never fires unless the slash is appended?
I have a GridView control bound to an AccessDataSource. After selecting a row I'm creating a table inside the selected row. I'm adding Buttons to this table. Their Click event never gets fired. I read about recreating the buttons and stuff, but still no luck solving the issue.
Problem : I have Added One Link button to the above Table.. Click Event for That Link Button Is not Firing Now. when i click on link button of table event is not firing at all.
rowdatabound event is not firing during postback ,What to do?First time pageload I am getting result as expected. When I click checkbox ,which is in grid ,my values which are in other columns get disappeared, that means during postback. How to maintain values in the grid even after postback.note : I did some small manupulation of data during rowdatabound event for the columns which are in the grid.
1. chkresponse = new System.Web.UI.WebControls.CheckBox[cnumber + 1]; for (int i = 0; i < cnumber + 1; i++){ chkresponse[i] = new System.Web.UI.WebControls.CheckBox(); chkresponse[i].CheckedChanged += new EventHandler(chkresponse_CheckedChanged); chkresponse[i].AutoPostBack =true; }
2. thereafter adding them to a panel
Panel1.Controls.Add(chkresponse[n]);
3. then added the checkedchanged event:
public void chkresponse_CheckedChanged(Object sender, System.EventArgs e) {Label1.Text = "response";}
but the event is never fired. the panel is insdie an updatepanel.
I have created a user control. Usercontrol contain a image. Attached a click event on image jusing javascript function.
image.onclick = function (e) { //some code };
Now this user control is added on aspx page. Thsi is working file first time. however when the page is getting postback this event is not working.UserControl EnableViewstate is true.What should be done?
On grid RowDataBound based on some condition i've added imagebutton dynamically. parallelly i want to add event for this button click. here is my code snippet.
protected void GV3_RowDataBound(object sender, GridViewRowEventArgs e) { if (e.Row.RowType == DataControlRowType.DataRow) { TableCell cell = new TableCell(); ImageButton bttn = new ImageButton();
[Code]...
That message popup box comes, but i'm unable to catch that click event. while click on a row i want to delete that row, so want to create event dynamically. for that i've used this following dynamic click event
bttn.Click += new ImageClickEventHandler(b_Click); private void b_Click(object sender, EventArgs e) { //delete record }
I know this topic has been posted before but I'm stuck on it still.I've placed creating of dynamic control on Page_Load but the event isn't firing.On my asp page, i have <asp:PlaceHolder ID="test" runat="server/>On my code behind, I have private display method.
private void DisplayButton() { LinkButton btn = new LinkButton(); btn.ID="unit_1";
I have a asp.net page with a button, the event the button needs to perform on it's click event needs to vary, dependant on what options are selected further up the page. The button itself is included in the master page, and it's actions are affected by selections made in the child page.
To do this, I have a method in the master page, that is called by the child page, when a users presses a button, that passes the Eventhandler to be used by that button, that is then assigned to masterpage eventhandler for that button:
public void assignEvent( EventHandler saveEvent) { this.SaveButtonEvent+= saveEvent }
Then, when the save button on the master page, it calls that eventhandler
The event handler is assigned ok in the first section of code, however because pressing the save button causes a postback, the SaveButtonEvent event handler is set back to being null, and so nothing happens.
How can I preserve the contents of SaveButtonEvent Event Handler during postback, or is there a better way to be doing this?
EDIT:
I can get this to work by saving the EventHandler to the session, but this doesn't seem like a great idea.
Creating a list of users with a "Delete" linkbutton next to each". Seems I got it all wrong (again..away from webforms a long time).
Here's what I do:
Building a list of users with delete buttons:
Code: foreach (var user in users) { var usr = user as UserInfo; var row = new TableRow(); var cell = new TableCell();
[Code] ....
The "Delete""event handler:
Code: protected void btnRemoveModUser_Click(object sender, EventArgs e) { var button = sender as LinkButton; var userController = new UserController(); var user = userController.GetUser(PortalId, int.Parse(button.CommandArgument)); RemoveUserFromRole(Enums.KnowledgebaseRole.KB_Moderators, user); }
I got a hunch though it's because of the when/where I'm loading that list of users. I call the function (getting a list of all users, clearing the table and populate it again):
In the page load, if not a postback. Every time the "Add user" function have been called (that works fine). Every time the "Delete user" function are called.
The last will not delete the user (still in database) but reload the ^&* form without any users.
I just found that the delete handler does not get called at all, but the button post back the form, so my list of user's don't get loaded.
I have created dynamic control with both server and client side events.. if i set client side event server side event is not firing.. I have created the link button which will validate and do some necessary actions.. Validation is working but click event of link button is not firing .. if we remove the client side event , server side event is firing.. how to avoid this.. I want both events..
