Visual Studio :: Authentication Required In Web Project With VS 2008?
Feb 12, 2011
I am moving from one laptop (WinXP Pro) to another (Win7 Pro). I have re-installed VS 2008 (which wasn't straightforward BTW).
On copying one of my web projects, now when I choose "view in browser" to look at my handiwork, Firefox now requires authentication. I use my windows username/password.
But IE8 doesn't require authentication.
I don't need authentication if I run VS 2008 as Administrator.
It's not a show-stopper, but it could prove irritating.
I have downloaded a project from the internet called the SMS Source example. I wanted to open this project in VS2010, so a conversion wizard has popped up prompting for the conversion. But it has errors in converting.
we can not add .mdf file to the project in vs2008 and sql server2008 when i am adding .mdf file its displaying an error message so it is not possible to add
I recently bought a new computer, so I want to copy the projects into current system which has visual studio. I have a project developed in VWD 2008. I copied the folder into a flash drive and copied it back into the new system.
Knowing the location, how I do import the project into new system?
My desktop management team have just installed visual studio 2008 and there is no plugins for asp.net. Is this missed out while they installed visual studio? Can this to be installed again?
When working with an ASP.Net application, when I rebuild the solution, I would like it to automatically refresh the current version thats running through the integrated server in the browser.
I have looked through post build commands and afterbuild targeting but I have not been successful so far. I would like to do this straight through VS2008 if possible without needing to install anything extra, put if thats not possible then any solution would do!
I started working on an Asp.net MVC website using Visual Web Developer Express 2008 a while ago. Just recently, I managed to get my hands on a copy of Visual Studio 2008 Professional (through DreamSpark ). I installed the Service Pack, and also the MVC2 files for Visual Studio.
However, now I can't open my project anymore. When I try to open the solution in Visual Studio, it tells me that the project type is not supported. Does this mean that I have to resort to using VWD Express again? Is there perhaps some way that I can edit the project file so that it will load and compile correctly?
Note: I installed MVC2 through the Web Platform Installer, and it says that it installed successfully. However, I notice that MVC references in my unit-test project don't seem to be resolved either - is this perhaps because MVC2 isn't actually installed properly?
In a Web Application project in VS08, how do you create an assembly? E.g. you derive a class based on HtmlGenericControl to form your own div, override the ClientId and UniqueId properties, so as not to get screwed up id's on the client-side, and then you want to use/reference this control in an aspx page.
refer to David Lively's answer (c# control names) regarding the same thing. I have tried his solution but I keep getting "could not load assembly file".
I know this is working correctly beacuse when I publish my website to my hosting provider, and request a resource in a protected directory, and I am not currently authenticated, I get automatically redirected to my login page and then once successfully authenticated granted access and redirected back to the sure *.aspx file in my protected directory (assuming I am authorized for those resources).
So that is working no problem.
However, when I run this from visual studio 2008 (F5) in debug mode, I am not being required to authenticate. It simply serves up the protected resource without asking for my credentials.
If I put a [PrincipalPermission(SecurityAction.Demand, Authenticated = true)] on a BLL class method, it will throw an security exception, but the page that is calling it is in a secure directory and I am never asked to authenticate using the login page.
I am closing and re-opening brosers, clearing cookies, etc..., but no matter what I do I am not automatically redirected to the login page, and the secure page when I launch from visual Studio running on the embedded local host. Thiis working perfectly externally, same build, same web.config, pointing to the same database, on the hosting provider. (yes, eventually, I will be using dev/test/prod db configurations to test, but for now for simplicity I am keeping it the same)
Not only is it maddening, but worse yet, it would obviously make testing this application impossible after the initial release.
I wonder how to add a project template called Intelligence Reports, something like that, to Visual studio 2008. I have SQL 2008 installed. Do I need to install some updates to get Intelligence Reports template to Visual studio 2008 ?
I'm new at ASP.NET. I'm trying to follow the first video tutorial in this link (Web Forms): [URL]. I see the guy using the same IDE as I use. He goes to File > New Project. I do not have the NEW PROJECT item in the FILE tab. Therefore I cannot follow the steps. I do not have the templates either for MVC or Web Forms Using: .NET framework 3.5
I have Visual Studio 2008 Standard Edition- Version 3.5 SP1 (9.0.30729.1 SP).I've noticed when working through examples they show a window, Create Unit Test Project, but that this window never appears when I follow their steps.Do I need to go somewhere and check a box so the program will give me this window?Does this mean VS2008 didn't install correctly?
The problem is I have a laptop that I take to University with me to all my lessons and lectures and it has Visual Studio 2008 installed on it and I work on my assignments in Visual Studio just fine. However when I get home I would like to use my desktop PC which has the exact same copy even from the very same disk of Visual Studio 2008 that is installed on my laptop. The problem is no matter what I do I can't open and work with any projects that I have created on my laptop.
Now if I create the project on my desktop PC it will open just fine on my laptop and I can continue to work with the project but the minute I save and take that project over to my desktop I get the self same error message shown below. [URL] I did do a little research and I found what looked like a solution for some people and that was to change the "SQL Server Instance Name" to SQL2008. As shown below it was set to SQLEXPRESS which is the same as what it says on my laptop copy. [URL] But all this did was present me with a new message as shown below. [URL] Uploaded with [URL] I'm completely at a loss as to what the issue is. Both my laptop and desktop run a fully updated copy of Windows 7 64Bit and have the same copy from the same CD of Microsoft Visual Studio 2008.
downloaded a project from a site,the project was built by vs2005.I only have web developer express 2008, when I load the project,it converted the project and opened it but there is nothing in the project. the project is a MVC project, all folders/files are not in the converted project.can I open the project (built by vs2005) using exppress 2008 for MVC? if yes,how?
I have a vs2005 web application project, Since the server is upgraded to windows 7, so i upgraded this web application project to vs 2008, but failed, the error message is as below, Unable to read the project file XX.csproj. The web appilication project verovaluexmllistener is configured to use IIS to access local iis website you must install all of the following windows components. IIS, IIS 6 metabase and iis 6 configuration compatibility asp.net. In addition, you must run vs in the context of administrator account . by default, windows runs applications in a limited -privilege user account even when you are logged on to the computer as an administrator, To run Visual studio with administrative privileges, right click the visual studio .
I've been working on this for a while now and nothing has been a bigger pain in asp.net. I'm trying to implement custom profile fields in my visual studio 2008 web application project. I've read a lot of tutorials but they all seem to be either out dated or don't apply to web application projects. Last night I got a little closer to solving the problem when I found the "Web Profile Builder" for web applications. I've successfully set this up and can handle static profile data.I've got my web.config file setup and I can access my custom profile fields by Profile.CustomField. Now I want to figure out how I integrate this with the database and data connection. I know there are two standard ways to handle this, I would like to create new columns in the aspnet_Profile database (rather than the delimited key/value option).I'm pretty new to asp.net and this is my first project with c#, .net, and asp.
Have a project that was created in Visual Studio 2008 and deployed to a 64-bit Windows 2003 server. This application references a 32-bit Interop.ActiveDs.dll. The applications were originally compiled for 'Any CPU', however, explicitly compiling as 'x86' doesn't solve the problem. The project targets the 3.5 framework.
The server is running IIS 6.0 in 64-bit mode. When we deploy the version compiled in Visual Studio 2008, the app runs perfectly fine; all pages show up. In retrospect, this is actually surprising.We migrated the application to Visual Studio 2010 (we did not change the targeted framework) and redeployed. Now we get a BadImageFormatException loading Interop.ActiveDs.dll. Which actually makes more sense than the 2008 version running.To solve the problem, we set Enable32bitAppOnWin64 to true and ran aspnet_regiis.exe -i from the 32-bit folder of the 2.0 framework (as per various instructions on the web). In IIS, web service extensions, there were two versions of ASP.NET 2.0, one for 32-bit and one for 64-bit. We prohibited the 64-bit version, restarted IIS, and launched the website.
What we expected: The app to run as 32-bit, load the interop, and display What we got: "Service Unavailable"All other web pages that were previously working displayed the same message, as did the Visual Studio 2008 version.The support page here describes the problem exactly, but tells us to do exactly what we did to resolve the problem (enable 32-bit mode).We've rolled back to 64-bit mode in IIS and deployed the Visual Studio 2008 version for now, but we really need to figure out how to make this app run and load the interop (there are also 32-bit Oracle DLLs that are referenced)Two questions:Why does the Visual Studio 2008 version work at all?? How do we get the Visual Studio 2010
I have an ASP.Net project created by a team member on another computer. The project references a virtual directory that exists on my computer but under a different localhost location.Currently, the following error occurs when I try to open the project:
The local IIS URL http://localhost/foo/default.aspx specified for Web project foobar has not been configured. In order to open this project the virtual directory needs to be configured. Would you like to create the virtual directory now?[Yes] [No]
So, there are two options: select yes: It creates the virtual directory that it thinks I need, which I don't want to do. I already have a virtual directory somewhere else.
select no: This isn't an option, as the project opens, but without all the bells and whistles I know and love.
Where is the virtual directory location (in my case http://localhost/foo/default.aspx) specified within the project? Can I change this manually, say in a configuration file within the project, either before or after I open it? A configuration change seems more ideal than manually opening IIS to override a virtual directory path.
EDIT (solution): Buried in the comments below is the following answer (Thanks @Thyamine)This can be configured in the foo.csproj file for the project. Look for the lines:
Is there any tool for Visual Studio 2008 which can reformat ASPX code to make it more presentable (eg insert line breaks, format the lines so they wrap when necessary, etc)?
Im working on a website project with Visual Studio 2010 from 2 different computers (home & work). In Dreamweaver Im used to FTP to upload/download files to/from a webserver to syncronice my files on the current computer Im working on.What is best option in Visual Studio 2010 to sync project files between home & work computers? I have seen there is a built in FTP, but seems only it can upload files, limited functionality?