Trying To Implement Custom Profile Fields In Visual Studio 2008 Web Application Project?
Mar 18, 2010
I've been working on this for a while now and nothing has been a bigger pain in asp.net. I'm trying to implement custom profile fields in my visual studio 2008 web application project. I've read a lot of tutorials but they all seem to be either out dated or don't apply to web application projects. Last night I got a little closer to solving the problem when I found the "Web Profile Builder" for web applications. I've successfully set this up and can handle static profile data.I've got my web.config file setup and I can access my custom profile fields by Profile.CustomField. Now I want to figure out how I integrate this with the database and data connection. I know there are two standard ways to handle this, I would like to create new columns in the aspnet_Profile database (rather than the delimited key/value option).I'm pretty new to asp.net and this is my first project with c#, .net, and asp.
View 3 Replies
Similar Messages:
Mar 25, 2010
In VS 2005 we need to install patch or VS2005 SP1 to create "ASP.Net Web Application" project.
how to create "ASP.Net Web Application" project in VS 2008? (Not Website)
View 5 Replies
Mar 17, 2011
In a Web Application project in VS08, how do you create an assembly? E.g. you derive a class based on HtmlGenericControl to form your own div, override the ClientId and UniqueId properties, so as not to get screwed up id's on the client-side, and then you want to use/reference this control in an aspx page.
refer to David Lively's answer (c# control names) regarding the same thing. I have tried his solution but I keep getting "could not load assembly file".
View 1 Replies
Jan 24, 2011
I have a vs2005 web application project, Since the server is upgraded to windows 7, so i upgraded this web application project to vs 2008, but failed, the error message is as below, Unable to read the project file XX.csproj. The web appilication project verovaluexmllistener is configured to use IIS to access local iis website you must install all of the following windows components. IIS, IIS 6 metabase and iis 6 configuration compatibility asp.net. In addition, you must run vs in the context of administrator account . by default, windows runs applications in a limited -privilege user account even when you are logged on to the computer as an administrator, To run Visual studio with administrative privileges, right click the visual studio .
View 2 Replies
Aug 14, 2010
is it possible to convert whole visual studio 2008 web site project to visual studio 2010 web site project
my current project references
i have a very annoying iis problem
iis server stops working until app pool is recycled
i am hoping that new visual studio (net framework 4.0) may solve this very annoying unsolveable problem
View 2 Replies
May 21, 2010
Anyone know if I can maintain a VS 2008 (.net 3.5) project by using the VS 2010 IDE ?
View 1 Replies
Jul 17, 2010
I have downloaded a project from the internet called the SMS Source example. I wanted to open this project in VS2010, so a conversion wizard has popped up prompting for the conversion. But it has errors in converting.
Error msg:
Conversion Report - SMSSend.csproj:
Error converting project file. MSB0001: Internal MSBuild Error: Missing resource 'MissingAttribute'
View 3 Replies
Mar 18, 2010
we can not add .mdf file to the project in vs2008 and sql server2008 when i am adding .mdf file its displaying an error message so it is not possible to add
View 2 Replies
Sep 9, 2010
I recently bought a new computer, so I want to copy the projects into current system which has visual studio. I have a project developed in VWD 2008. I copied the folder into a flash drive and copied it back into the new system.
Knowing the location, how I do import the project into new system?
View 1 Replies
Mar 29, 2011
I recently updated my VS2010 website project from .NET 3.5 to 4.0. Everything was working fine in the website project. Today I decided to migrate the website to a web application project as I have learned this is the best way to work in .NET. I split out all my class files into a separate class library and copied all my other content into my new project. Then I updated all the references and web.config.
When I build the class library, everything works great. The problem is happening when I try to build/debug the web application project. It is acting like all the controls are missing and it is also throwing a bunch of compile errors about the public properties I have in my master pages.
Control errors: "The name 'INSERT CONTROL NAME HERE' does not exist in the current context"
Master page errors:'System.Web.UI.MasterPage' does not contain a definition....
It is giving these errors for every single control and master page property in my entire solution.I notice when I add a new web.form to this project, it also adds a filename.aspx.designer.cs file in addition to the .aspx and .aspx.cs file. My existing files do not have these extra files since they were created in a different .NET version.
UPDATE: It seems I was missing the step where I need to right click on the new application folder and select "Convert to web application". I just did that and it seems to be a little bit better...
Now it is choking on Literals that are inside single quotes:
<div class='<asp:Literal ID="CssClassLiteral" runat="server"></asp:Literal>'>
It doesn't see this literal when it does the conversion... Is the above valid code or should I implement that functionality another way?
View 1 Replies
May 28, 2010
How can I ensure that web application converted from 2003 visual studio to 2008 visual studio
to have two files as it is when create a web file in visual studio 2008.The web application is in Chsarp. I have converted these filesfrom 2003 to 2008 but they still have three files each.
View 4 Replies
Feb 16, 2010
I am new to .NET
what is Unit Testing in VS 2008 and how to implement it.
View 3 Replies
Feb 12, 2011
I am moving from one laptop (WinXP Pro) to another (Win7 Pro). I have re-installed VS 2008 (which wasn't straightforward BTW).
On copying one of my web projects, now when I choose "view in browser" to look at my handiwork, Firefox now requires authentication. I use my windows username/password.
But IE8 doesn't require authentication.
I don't need authentication if I run VS 2008 as Administrator.
It's not a show-stopper, but it could prove irritating.
View 1 Replies
Nov 24, 2010
why Visual Studio is not showing the last project open. Actually it's not showing any that I have had open. If there a clitch.
View 2 Replies
Jan 8, 2010
My desktop management team have just installed visual studio 2008 and there is no plugins for asp.net. Is this missed out while they installed visual studio? Can this to be installed again?
View 2 Replies
Mar 5, 2010
When working with an ASP.Net application, when I rebuild the solution, I would like it to automatically refresh the current version thats running through the integrated server in the browser.
I have looked through post build commands and afterbuild targeting but I have not been successful so far. I would like to do this straight through VS2008 if possible without needing to install anything extra, put if thats not possible then any solution would do!
View 1 Replies
Mar 24, 2010
In the Setup Project I have 2 web.config files: web.config - used during the development and web_dist.config - the one that should be included into Setup Project. I must be sure the the Setup project will NOT include the web.config and will always include web_dist.config.
In the File System -> Web Application Folder I have added the Content Files from the project.
Also included the web_dist.config and mapped it to the web.config.
But this gives the warning:
WARNING: Two or more objects have the same target location ('[targetdir]web.config') And the actual config file included is web.config and not web_dist.config. What would be the best option to include the web_dist.config (and named as web.config in the setup)?
View 2 Replies
Apr 20, 2010
I started working on an Asp.net MVC website using Visual Web Developer Express 2008 a while ago. Just recently, I managed to get my hands on a copy of Visual Studio 2008 Professional (through DreamSpark ). I installed the Service Pack, and also the MVC2 files for Visual Studio.
However, now I can't open my project anymore. When I try to open the solution in Visual Studio, it tells me that the project type is not supported. Does this mean that I have to resort to using VWD Express again? Is there perhaps some way that I can edit the project file so that it will load and compile correctly?
Note: I installed MVC2 through the Web Platform Installer, and it says that it installed successfully. However, I notice that MVC references in my unit-test project don't seem to be resolved either - is this perhaps because MVC2 isn't actually installed properly?
View 2 Replies
Mar 8, 2010
I wonder how to add a project template called Intelligence Reports, something like that, to Visual studio 2008. I have SQL 2008 installed. Do I need to install some updates to get Intelligence Reports template to Visual studio 2008 ?
View 1 Replies
Jun 15, 2010
Why I don't have publish or add a deployment project in my visual studio express 2008?
View 7 Replies
Mar 14, 2010
I'm new at ASP.NET. I'm trying to follow the first video tutorial in this link (Web Forms): [URL]. I see the guy using the same IDE as I use. He goes to File > New Project. I do not have the NEW PROJECT item in the FILE tab. Therefore I cannot follow the steps. I do not have the templates either for MVC or Web Forms
Using: .NET framework 3.5
View 4 Replies
Jan 27, 2010
I have Visual Studio 2008 Standard Edition- Version 3.5 SP1 (9.0.30729.1 SP).I've noticed when working through examples they show a window, Create Unit Test Project, but that this window never appears when I follow their steps.Do I need to go somewhere and check a box so the program will give me this window?Does this mean VS2008 didn't install correctly?
View 2 Replies
Feb 11, 2011
The problem is I have a laptop that I take to University with me to all my lessons and lectures and it has Visual Studio 2008 installed on it and I work on my assignments in Visual Studio just fine. However when I get home I would like to use my desktop PC which has the exact same copy even from the very same disk of Visual Studio 2008 that is installed on my laptop. The problem is no matter what I do I can't open and work with any projects that I have created on my laptop.
Now if I create the project on my desktop PC it will open just fine on my laptop and I can continue to work with the project but the minute I save and take that project over to my desktop I get the self same error message shown below. [URL] I did do a little research and I found what looked like a solution for some people and that was to change the "SQL Server Instance Name" to SQL2008. As shown below it was set to SQLEXPRESS which is the same as what it says on my laptop copy. [URL] But all this did was present me with a new message as shown below. [URL] Uploaded with [URL] I'm completely at a loss as to what the issue is. Both my laptop and desktop run a fully updated copy of Windows 7 64Bit and have the same copy from the same CD of Microsoft Visual Studio 2008.
View 13 Replies
Jul 21, 2010
downloaded a project from a site,the project was built by vs2005.I only have web developer express 2008, when I load the project,it converted the project and opened it but there is nothing in the project. the project is a MVC project, all folders/files are not in the converted project.can I open the project (built by vs2005) using exppress 2008 for MVC? if yes,how?
View 1 Replies
Jan 31, 2011
+1 if you are specific to ASP.NET MVC projects.
Update 9:42 PM:
I am thinking about this from now as I need several developers across the globe to work on this project. We will be using VS 2010 and I heard some thing about web application templates.
View 2 Replies
