Visual Studio :: Built-in Web Server Not Seeing ASPX Changes?

Jun 29, 2010

When I right click an ASPX page and click "View in Browser" the VS built-in web server starts up fine. However, if I go back to VS and make changes to the ASPX page and then refresh the browser, the changes are not reflected.

In order to see the changes, I have to stop the running web server and click "View in Browser" again to restart it -- then I can see the changes.

What's going on here? What would cause the built-in server (Cassini) to not reflect updates made from within Visual Studio? I also tried using UltiDev Cassini and am getting the same problem -- the web server does not load changes made in VS until the web server is restarted...

View 4 Replies


Similar Messages:

C# - Error Page After YSOD With Visual Studio Built-in Debugging Server?

Jan 7, 2011

Now that I am playing with NHibernate I am getting a lot more YSODs as I am learning it however I seem to get this error sometimesafter a YSOD:This webpage is not available
The webpage at http://localhost:49497/ might be temporarily down or it may have moved permanently to a new web address.Error 139 (net::ERR_TEMPORARILY_THROTTLED):

Unknown error.Is there any way to disable this because I have to wait a few minutes every time and that is a pretty big killer is productivity?

View 1 Replies

Visual Studio :: Adding A Server Control On Aspx Page Does Not Add Events In Aspx.designer.vb File?

Oct 5, 2010

I work in VS 2008. Whenver I add a server control(Label) and set it properties in aspx.vb and build the solution, I get the error "Label1 not declared". While analyzing this issue I noticed that the event handler statements for the Label1 where not added in the designer.asp.vb file. These statement would actually be added automatically when I drag and drop a control to my webpage.

I would also like to inform the scenario after which this problem came to me. I was working in VS 2008 , VS 2005 and VS 2003 in the same machine.Could this have caused the issue ?

Now each and everytime when I add a control, I am adding the "With Events" code in the designer page to make my build succesfull which makes me to spend more efforts.

View 2 Replies

Visual Studio :: Set Application Name For Built In IIS For VS 2005?

Aug 5, 2010

How do I set the ASP.net application name for the built in IIS for VS 2005? I am setting up a new dev box with an existing application. It has all the users and roles already created so I just need to specify the correct Application name and everything should work. It seems to run off the directory name of the project by default. But that isn't working completly for me. The Application name in the database is '/budgetsite' But when I put the files in c:developmentudgetsite' the web server uses 'budgetsite' as the Application Name. I am trying to avoid installing IIS on this box.

View 2 Replies

Visual Studio :: Use NUnit If VS2008 Has Built In Unit Testing?

Feb 5, 2010

My que is why use NUnit if VS2008 has built in Unit Testing

In my company app they are uing NUnit and I am wondering why. Now VS2008 has built in Unit Testing so why to use NUnit?

View 1 Replies

Visual Studio :: Error Message - Assembly Built By A Runtime Thats Too New?

Jan 24, 2010

I created an asp.net application, and it worked on my local PC. I was using Visual Web Developer 2010 beta.

Then I uploaded almost every file (not the sln and suo files) to my shared-host unix website. This Unix website is supposed to support asp.net.

But I got this error:

Server error in application. Could not load file or assembly 'dave' or one of its dependencies.This assembly is built by a runtime newer than the currently loaded runtime and cannot be loaded Does this mean my version of the net.framework is too advanced? Or maybe the version of Visual Web Developer? Or some other reason?

View 2 Replies

Visual Studio :: Open The Project (built By Vs2005) Using Exppress 2008 For MVC?

Jul 21, 2010

downloaded a project from a site,the project was built by vs2005.I only have web developer express 2008, when I load the project,it converted the project and opened it but there is nothing in the project. the project is a MVC project, all folders/files are not in the converted project.can I open the project (built by vs2005) using exppress 2008 for MVC? if yes,how?

View 1 Replies

Visual Studio :: In Visual Studio 2010 Not Finding Default.aspx Error?

Apr 29, 2010

I am having an issue in VS 2010 trying to get even the default ASP.NET Web Application to run in Debug mode. I get the error:

"Unable to start program 'http://localhost:1443/Default.aspx'.

The system cannot find the file specified."

I am stumped here and cannot find anything out there with this error.

View 4 Replies

Make Visual Studio Autoformat Source Code - Is It Possible Via Built-in Setting, Modification, Or Available From An Add On

Jun 25, 2010

I've searched but does Visual Studio 2008 have a setting for C# where it will autoformat/beautify my code as I write it? There is a setting for VB.NET called "prettify". I've also searched the archives already and found a macro to execute this on save and I know I can drag and drop it onto the toolbar but I want it to work without my doing ANYTHING for both ASPX and CS files.

Is this possible via built-in setting, modification, or available from an add on?

View 5 Replies

Visual Studio :: How To Set In Visual Studio Startup Page Other Than Default.aspx

Nov 29, 2010

Is there any opportunity to change it in Visual Studio - not in IIS?

View 2 Replies

Visual Studio :: Accessing Controls Of .aspx File In .aspx.cs Withtout Any Declaration?

Feb 10, 2010

I am able to access the controls of ".aspx" file in ".aspx.cs" directly without any declaration in ".aspx.cs" or in designer.cs. How is this possible? This is happeing only if I open website as using File System.

Create a new ASP.NET web site application with Visual Studio 2008. So following three files will be created automatically

[code]...

How btnSave is being recognized by .cs file without defining it anywhere as an object of System.Web.UI.WebControls.Button?

View 3 Replies

Visual Studio 2008 - Finding Tools For Visual Studio 2008 Which Can Reformat ASPX Code

Jan 6, 2010

Is there any tool for Visual Studio 2008 which can reformat ASPX code to make it more presentable (eg insert line breaks, format the lines so they wrap when necessary, etc)?

View 5 Replies

Visual Studio :: Got An Error "The Following Module Was Built Either With Optimizations Enables Or With Debug Information"

Apr 15, 2010

I just inherited a 2005 VS web project, and am trying to get it running locally. Upon running, I got an error "The following module was built either with optimizations enables or with debug information".

Investigation suggested I delete all files in the BIN directory and rebuild. I tried that, but no DLL's are being output by the project and it completely fails to load.

View 4 Replies

Open Aspx Files Directly By Clicking On Them Like Html Files Without From Within Visual Studio Or Visual Web Dev?

Feb 24, 2011

is it possible to open aspx files directly by clicking on them like html files without from within visual studio or visual web dev?

View 2 Replies

Visual Studio :: Drag Table Into Any Page Inside The Visual Web Developer Aspx Page?

Jan 11, 2010

When i drag my table into any asp page inside the Visual Web Developer aspx page, Nothing happen, Even there is no datasource or gridView it just the blank page i created.

I tried to create new web forms and all same results i got.

View 6 Replies

Visual Studio :: How To Convert Whole Visual Studio 2008 Web Site Project To Visual Studio 2010

Aug 14, 2010

is it possible to convert whole visual studio 2008 web site project to visual studio 2010 web site project

my current project references

i have a very annoying iis problem

iis server stops working until app pool is recycled

i am hoping that new visual studio (net framework 4.0) may solve this very annoying unsolveable problem

View 2 Replies

Visual Studio :: Not Able To Open Aspx.vb Files In VWD

Mar 28, 2010

I have a problem within a project in Visual Web Developer. The program will not allow me to open the aspx.vb file associated with an aspx file when I choose the "View Code" option. The aspx.vb file exists; however the program is prevented from loading it and seeing it in Solutions Explorer.

The problem may be related to how the entire project is loaded -- loading it as a project vs. as a website. When I load it as a project, I have compilation errors that do not exist otherwise, but can see the aspx.vb files. When it is loaded as a website, I can't open the aspx.vb files as described above.

View 5 Replies

How To Open .aspx Without Visual Studio And Make It LAN

Mar 27, 2011

I'm currently dealing with my final year project and of course, later I might need to present this whole things to my lecturer.

So, I would like to ask you guys about how to open my website without Visual Studio and make it LAN (can be accessed by two or more computer through LAN).

View 7 Replies

Visual Studio :: Code Behind Showing Up In Aspx?

Mar 9, 2010

Whenever I double click on my gridview in the design mode of aspx, my RowDeleted event is appearing at the top of my aspx instead of in codebehind! Like this:

[Code]....

What in the wide-wide world of sports is a goin' on here?

View 5 Replies

Visual Studio :: Snippets In Aspx Page?

Dec 29, 2010

I use DevExpress and have a lot of templates which I use in my Web Application - popup windows with certain styles, menus, rounded panels so on. Of course, I don't want to type the same markup hundred times but also don't want to find this markup in whole application in order to paste it again. I use snippets in code-behind for these purposes. But what about markup?I downloaded it but I see only code-behind refactoring and still can't find how can I use something like snippets in aspx page.

View 7 Replies

C# - Add Region In Visual Studio In Aspx Files?

Mar 9, 2011

I use asp.net with code behind and c#.

So I have two file for every .aspx page in VS 2010.

In .aspx.cs page I am able to add regions in my code using:

#region Name Region
#endregion

My questions:

How to do it in file .aspx? #region seems working only in .cs file. organize better my code both for .aspx and .cs file? Do you know the keyboard shortcuts to expand or collapse all my region in my code?

View 2 Replies

Visual Studio :: 2010 Bookmarks For Aspx Pages?

Sep 21, 2010

I'm used to working with VS 2008 and toggling bookmarks in aspx pages was very useful, however in VS 2010 I'm unable to toggle bookmarks using the CTRL + K + K or the actual "Toggle bookmark" button from the bookmarks tool. Is there an option to enable this on the ASPX page, it works everywhere else though.

View 1 Replies

Visual Studio :: Trying To View Default.aspx In Web Browser?

Jun 11, 2010

I am getting below error when trying to view aspx file in web browser. Server Error in '/Cricket Website' Application. Error finding Application Setting - Error running Procedure - Exception of type 'System.Exception' was thrown.

Description:

An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code.

Exception Details: System.Exception: Error finding Application Setting - Error running Procedure - Exception of type 'System.Exception' was thrown.

Source Error:

[Code]....

Line 162:Line 163: Catch ex As ExceptionLine 164: Throw New Exception("Error finding Application Setting - " & ex.Message)Line 165: End TryLine 166: End Function

Source File: C:inetpubwwwrootCricket
WebsiteApp_Codecommon.vb Line: 164

Stack Trace:

[Code]....

[Exception: Error finding Application Setting - Error running Procedure - Exception of type 'System.Exception' was thrown.] Common.getApplicationSetting(String appSetting) in C:inetpubwwwrootCricket WebsiteApp_Codecommon.vb:164 CMS.Page_Load(Object sender, EventArgs e) in C:inetpubwwwrootCricket WebsiteCMS.master.vb:34 System.Web.UI.Control.OnLoad(EventArgs e) +99 System.Web.UI.Control.LoadRecursive() +50 System.Web.UI.Control.LoadRecursive() +141 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +627 Version Information: Microsoft .NET Framework Version:2.0.50727.4927; ASP.NET Version:2.0.50727.4927

View 1 Replies

Visual Studio :: Debugging Stand-Alone ASPX Pages?

Sep 23, 2010

I inherited a web site which contains many stand-alone aspx pages (with the .NET code in the page rather than in a code-behind file). I'm wondering how to debug these pages; I cannot set breakpoints in them (I can set breakpoints in the code files on the site without issue). I'm using Visual Studio 2008.

View 1 Replies

Visual Studio :: Designer.aspx.vb Not Updating With Controls?

Jan 20, 2011

I have created one new project in vb. When i create the control in aspx page , the designer .aspx.vb not updating properly? I should write the corresponding control in .aspx.vb file.

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved