I started the Visual Web Developer 2010 installation via the Web Platform Installer 2.0. The progress bar reads: "Install progress: Installing Visual Web Developer 2010 Express [1 out of 1] It finishes after a while but I cant see a VWD shortcut in the start menu nor somewhere under program files, it does not appear in the control panel -> programes and features list as well. Where did it go? Did it install?
View 1 Repliestry to install visual web developer 2010 from web installer,http://www.microsoft.com/express/Downloads/#2010-Visual-Web-Developer once installer screen pop up, it stated that it is not supported for windows vista platform. However, previously before formatting pc, it has successfully installed once.
View 1 Repliesinstalling visual studio 2010 pro RC in windows Xp SP3 and getting a message prompt : invalid windows installer package contact vendorlog file says
Error Message:
[02/22/10,17:09:07] Microsoft Application Error Reporting: [2] CMsiComponent::Install() expects the setup file for Microsoft Application Error Reporting, but the file failed verification.
[02/22/10,17:09:07] setup.exe: [2] ISetupComponent::Pre/Post/Install() failed in ISetupManager::InternalInstallManager() with HRESULT -2147467259.
[02/22/10,17:09:08] VS70pgui: [2] DepCheck indicates Microsoft Application Error Reporting is not installed.
Can I install Microsoft Visual Studio 2010 Service Pack 1 in Microsoft Visual Web Developer 2010 Express?
View 1 Repliesi am installing on windows 7 visual studio 2010 but still continuing about 2 hours
View 1 RepliesI would like to create some test web applications with visual studio 2010 express.
I installed Microsoft Visual C# 2010 Express, but i dont have type of project web application mvc 2.
What should i install if i want to create a web mvc 2 application?
WebPI isn't able to install VWD 2010 Express on my system. I've previously un-installed the 2010 beta. Never had this problem before when upgrading VWD Express.
View 8 RepliesI get an HttpException (details below) after installing Visual Studio 2010 Pro RTM in an application developed using Visual Studio 2010 RC. The platform used was ASP.NET MVC2 RTW (already under VS10 RC).
I first uninstalled all RC software and even ASP.NET MVC 2, and then did a "clean" install of VS10 RTM. The ASP.NET MVC 2 version now installed on my dev machine is 2.0.50217.0.
Exception Message: Error executing child request for handler 'System.Web.Mvc.HttpHandlerUtil+ServerExecuteHttpHandlerAsyncWrapper'.
InnerException Message: <FilePath>ViewsLanguageRenderLanguageNavigation.ascx(6): error BC30451: 'Model' is not declared. It may be inaccessible due to its protection level.
The error occurs on this "Html.RenderAction":
[Code]....
The "LanguageController" just calls into another service function as below:
[Code]....
Does anybody have an idea what is causing the problem?
Edit:
By the way, I might also share the actual view (partial view) that would show the languages to select from:
[Code]....
why after installing VS2010 SP1 starting and stopping the debugger takes forever?
View 1 RepliesWhy does the Web Platform Installer force you to install SQL 2008 Express?
I have a production server which already has an installation of SQL 2000 but no web development tools are installed. I would prefer not to add SQL 2008 Express if it is not necessary. The server in addition to being the primary intranet webserver is also DC, APP SERVER, FILE SERVER and basically does not need to handle an extra instance of SQL.
The main purpose of this is just one of convenience to have the web development app on the RDP Desktop instead of attaching to the server in some manner (ftp/unc share).
I've installed visual studio 2010 full version and worked on couple of assignments. Right now, I'd want to connect to SQL server database to move ahead and store and retrieve data into the database. Can someone please point me in theright direction or walk me through the configuration. I see sql server 2008 has come with Visual Studio 2010. Not really sure if i need to install anything else. Also, post a sample application code to connect and fetch data using a select statement ??
View 23 RepliesI tried to install Visual Studio Prof 2010 trail version in my system, but i got an error saying 'Please remove/uninstall Visual Studio 2010 load test controller' to proceed installation. i uninstalled my previous VS2008 software from system and i could not find anything like 'Remove/Uninstall Visual Studio 2010 load test controller' software in my Add/Remove Programs.
View 1 RepliesHow to debug HTTPMOdule(asp.net c#) in VISTA with IIS 7.0. if i want to attach aspnetworkerprocess in httpmodule using vs 2008 , am not able to see aspnetworkerprocess. plesae let me know how to debug httpmodule on windows vista with ii7.0 using Visual studio 2008.
View 4 RepliesI'm thinking about installing vwd 2010 or vs 2010 express but want to know if either offer integrated jquery support.
View 4 RepliesI can't seem to get the mvc 2 to install. I have a copy of visual studio 2008 already installed and working. I'm using vista ultimate 32-bit and I've ran it normally just by double clicking it and also by doing a run as administrator. Both fail with the same log entries. It always exits with code 1603.Here's the bottom portion of the install.log file:
'Microsoft ASP.NET MVC 2' RunCheck result: Install Needed Verifying file integrity of :UsersglenAppDataLocalTempVSD1766.tmpMvcRuntimeAspNetMVC2.msi WinVerifyTrust returned 0 File trusted Installing using command 'C:Windowssystem32msiexec.exe' and parameters ' -"C:UsersglenAppDataLocalTempVSD1766.tmpMvcRuntimeAspNetMVC2.msi" -q ' Will attempt to elevate process. Process exited with code 1603 Status of package 'Microsoft ASP.NET MVC 2' after install is 'InstallFailed' Status of package 'Microsoft ASP.NET MVC 2 - Visual Studio 2008 Tools' after install is 'InstallNeeded'
I have a VS 2008 solution with 16 projects (1 web site and 15 class libraries. The website uses the assemblies). This all worked fine on Win XP pro.
My work PC just got upgraded to Windows vista business and i'm receiving the following error each time i build the project.
Could not load file or assembly 'xxx, Version=1.0.1363.21887, Culture=neutral, PublicKeyToken=null' or one of its dependencies. Access is denied.
I went on and signed all the assemblies and added them to the GAC. But i keep having this error when i build my project. I'm running vs 2008 as administrator.
I had Visual studio 2008 Team system installed on my machine and tried to uninstall that . When I did the uninstall, am getting a wierd error message "A problem has been encountered while loading the set up components .Cancelling set up". I googled this and found some posts asking me to uninstall all the hot fixes associated with VS 2008 TS .I did that but still am getting the same message.
View 2 Repliesis it possible to convert whole visual studio 2008 web site project to visual studio 2010 web site project
my current project references
i have a very annoying iis problem
iis server stops working until app pool is recycled
i am hoping that new visual studio (net framework 4.0) may solve this very annoying unsolveable problem
I've been bashing my head against this one for a few days, and haven't had any luck with it. I'm unable to get my VS2010 ASP.NET project to deploy to IIS. I receive the error"Unable to create the virtual directory. To access local IIS Web sites, you must install the following IIS ComponentsIIS 6 Metabase and IIS 6 Configuration CompatibilityASP.NETIn addition, you must run Visual Studio in the context of an Administrator Account"I've most certainly installed the metabase option, but it still shows up. I'm also not sure why it's telling me to install ASP.NET.Google is being entirely unhelpful, I was wondering if anyone here has any suggestions. I'm running Vista Ultimate 64Bit
View 1 RepliesAnyone know if I can maintain a VS 2008 (.net 3.5) project by using the VS 2010 IDE ?
View 1 RepliesI just downloaded and installed Web Matrix beta.
I am really liking the razor view engine.
Not so much the Web Matrix IDE.
Is there any way to install razor view engine for use in the Visual Studio without installing WebMatrix?
Visual Studio 2008
I've been using AJAX for a while now, and have installed it on a few computers before to run with Visual Studio 2008. I am now setting up a new computer to develop websites using the AJAX control toolkit. However, I cannot find ANY documentation in Microsoft to install AJAX. Everywhere it says "Install Toolkit" all instructions say install toolkit. Howerver, installing the toolkit does nothing it just adds the toolkit then does not work since the ajax extensions are not installed. So you obviously need to install the extensions or whatever first so Visual Studio can work with AJAX. NO where does it say this or how to do it. I'm amazed that any programmer can use AJAX at all, how the hell do I install ajax to work with visual studio, NOT the toolkit!
I have been ising TFS 2010 with VS 2010 Ultimately for a couple of months now. I have a client who is using Visual Web 2010, does anyone know if this integrated with TFS easily?
View 1 RepliesI just recently upgrade my asp.net web project from visual studio 2005 to visual studio 2010. The upgrade was successful with no problems however im missing some features with this project. The One Click Publish feature(which is greyed out) in the header area of Visual Studio 2010 and the Add Config Transforms feature which is no where to be seen when you right click on web.config. When i create a new web project straight from visual studio 2010, these options work fine.
View 1 RepliesVisual Studio 2010 Beta 2 locked up, and when I tried to restart it, it wouldn't load, so I did a devenv.exe /resetuserdata to get it going again. It reset everyhing in my options of the web app/ etc, and now some AJAX conrols don't work such as dragpanel. I assume that it is because something got reset that I haven't enabled again, but can't figure it out.
View 2 Replies