Visual Studio :: Remote Debugging Precompiled Website?
May 19, 2010
I have a precompiled website deployed in a remote test server. I want to debug the site from my computer. Following page says that the compilation should be performed with symbolic information.
[URL]
I had compiled my application in debug mode.
Unfortunately the breakpoints are not hit even with a copy of the precompiled website deployed in my local IIS. Following were the actions done with the local copy.
1. Requested the Page
2. Opened the source code and attached visual studio to aspnet_wp.exe
3. No break points are hit( I can see visual studio giving the hint- The breakpoint will not currently be hit. No symbols have been loaded for this document.)
View 3 Replies
Similar Messages:
Mar 7, 2011
I'm trying to debug my web application on my localhost machine in Visual Studio 2010 and I keep getting this error: "unable to start debugging on web server. The Microsoft Visual Studio remote debugging monitor(MSVSMON.exe) does not appear to be running on the remote computer."
Is there a way I can turn this off as I'm not trying to make any attempts debugging remotely.
View 1 Replies
May 5, 2010
Overall debugging works, but each step through code takes dosens of seconds.
I've already closed all additional windows like stack trace,watches,autos; deleted all breakpoints.
server and dev machine are located in different domains, so i set up local user on both, with matching password. remote debugger is running as service.
looking at security log, I found quite a lot of entries about remote debugging account logging in (record about every minute).
how i can speed up remote debugging?
dev computer: quad core, 8 Gb mem, win 7 x64 , visual studio 2010 ultimate target server: asp.net website , 2xdual core xeon, 2Gb mem, remote debugger 2010communication channel: vpn , 5 mbit , latency about 20ms. (seems that debbugging never uses more than 20 kb/s)
View 2 Replies
Jan 20, 2011
All of examples on web assume the remote server which we are going to debug remotely is on the same network. I have only a static IP address and using RDP I connect to server.
I've installed Remote Debugger on remote machine but cannot set the static IP address as Qualifier in visual studio -> debug -> attach to process
View 1 Replies
May 4, 2010
i have problem with Visual Studio 2010 on Windows 7 x64. When i started asp.net site debugging, it stoped working. Only solution is restarting IIS.
Have anyone experiences with this?
View 3 Replies
Jul 16, 2010
I recently upgraded to Windows 7 Ultimate on my work computer. Before this debugging a website in Visual Web Developer 2008 was really fast - the page loaded up like a normal website would.
Since I've upgraded to Windows 7 the page loads like normal but gets stuck for about 30 seconds at the end of the load - this is slowing me down as I normally need to use the FireBug tool as soon as the page has loaded.
View 4 Replies
Jan 19, 2011
In Visual Studio, when I click > Debug, > Start Without Debugging, (with my default browser set to IE), the application starts but it opens 2 IE browser instances. It opens 1 IE instance to start BUT when I close it, it launches another browser instance with the same start page. This bug is repeatable and consistent behaviour, that I can reproduce on-demad in IE.
(In some other minor variations, it seems that depending upon exactly how I start it, it will open 1 browser instance with 2 tabs, each tab having the startup page in it. However, this is not yet repeatable or consistent. It has happened; but, as of now, I am uncertain as the the exact steps to reproduce this particular variation of the anomaly.)
I am using Internet Explorer 8 (IE8).
I am using on Windows 7 32-bit.
I am using Visual Studio 2008 Standard.
I only have 1 startup project defined in Solution properties.
I have all Toolbars And Extensions set to "Disabled" in IE.
I have turned off "Automatic Crash Recovery" in IE.
(This does NOT happen in FireFox.)
View 2 Replies
Apr 1, 2011
I'm creating a website in Visual Studio 2010. I would like to use Visual Studio for C# debugging, but it also uses Visual Studio as JavaScript debugger. Is there a way to disable script debugging for Asp.Net website projects? I run my projects by hitting F5 in my Visual Studio. (I've noticed that when I attach the debugger manually, I can specify the type of stuff I would like to debug.) Note: I would like to debug, but not with Visual Studio. The developer toolbar is enough.
View 3 Replies
Jan 7, 2010
My website application is developed with Visual Studio 2008. The programming is written and tested with a project saved on my local hard drive. Afterwards the program is transferred to my http site with the Copy Web Site function of VS 2008. Previously Visual Studio always knew the location of the remote web site. It always started the Copy Web Site function with my source site as the http site and the remote site as the site on my hard drive.
Recently, Visual Studio demands that I enter the remote site. Of course, I can do this and cause the Copy Web Site function to work. However, when VS knew the remote web site, it could easily notify me as to what changes had occurred on the Remote site since the last Copy Web site function. This helped me in determining which files needed to be copied to the http Source web site. How can I permanently link my hard drive file location as the source site in the Copy Web site function of Visual Studio 2008?
View 2 Replies
Jun 3, 2010
I get this error when I hit F5 in VS 2008. I have checked that Windows authentication is enabled on the site and it is. I can mannully attach the debugger to the IIS process and it works. What could be wrong? I have tried alot of things without success.
View 2 Replies
Feb 9, 2011
I run the start debugging option...it runs successfully. but still is shows start debugging option is shown in the Visual studio 2005 IDE. And one more problem is ::I applied break points in one page and run the application. but those break points are not detected....
View 1 Replies
Sep 7, 2010
I have upgraded a Visual Studio 2005 Web Site in a 32 bit server to Visual Studio 2008 maintaining the same 2.0 framework in a 64 bit server with Windows 2008 R2 Server. The Web Site has several class libraries.
After porting to Visual Studio 2008 2.0 Framework using the Upgrade Wizard, I found that I was unable to hit a break point in the Project code behind files while I was able to in the class libraries. The bin folder has the dlls and the corresponding pdb files for the class libraries. I did start the Web site as an Administrator and made sure whole bunch of IIS7 properties are properly set.
I tried to rebuild the solution as a Web Application in Visual Studio 2008 and gave up that approach as I faced hundreds of error messages pointing to missing references and namespaces inspite of adding whole lot of references and namespaces to the Web.
View 12 Replies
Apr 8, 2010
is there an easy way to debug an application in vs 2008 without actually logging onto my machine as different users? its a winforms app in 3.5 on xp...i know how to do the whole "run-as" option when the program is done and built, but for testing its getting really annoying! maybe something like impersonate that web apps have...anything like that for winforms?
View 2 Replies
May 7, 2010
i put a break point at ADD button, when ever i click on the button the it is not entering into that?
what might be the problem?
previously it has worked but its not working.
View 1 Replies
Dec 6, 2010
I have a site that I am developing with VS 2008. I have a breakpoint set in my code behind file. This file is vast as some of it was created with Iron Speed 7.0. What I'd like to do is limit the debugger to the one file. That is, no matter where the code goes it skips over code in other files, and automatially breaks when execution returns to the file I put the break point in. The code is too vast to step a bit at time and choose to step into or out of bit of code. I want it to just debug the current file.
View 1 Replies
Jan 27, 2010
When I click "Start Debugging", VS2005 cannot hit a break point. How can it be resolved?
View 3 Replies
Feb 15, 2011
I have a problem with Visual Studio 2010. When I start debugging it works slowly.
Internet Explorer opens, but the website loads extremely slowly.
My workmate and me work on the same project and he doesn't have any problem like that.
My hardware is 4G memory + Intel Core i5 CPU 3.20 GHz.
I stopped my anti-virus program but it couldn't be resolved.
View 2 Replies
Nov 22, 2010
I have used Visual Web Developer (versions up to 2010) with no problems for several years. Starting last week I am no longer able to run or debug any ASP.Net application locally. I am running Windows XP, IIS 5.1, IE8, Visual Web Developer 2005, targetting .Net 2.0. I am not able to Start Debugging or Start Without Debugging for any project. When I attempt to Start Debugging, IE browses to [URL] instead of to the project I am attempting to run. When I Start Without Debugging, IE opens to about:blank and then when I close that window another IE window opens to [URL]
Maybe irrelevant, but I had the same problem with IE7 and VWD 2010 (versus IE8, VWD 2005). IIS is set to .Net version 2.0. I have the same problem whether I add a virtual directory to my project in IIS or not.
View 5 Replies
Jul 16, 2010
Older machine (2 years), Visual Studio 2008 SP1, Windows 7.
Error message when trying to open previously created mvc2 web app on IIS through Open Web site > Local IIS
"Unable to open the Web site "htpp://localhost/websitename" To access local IIS Web sites you must install the following IIS components:"
(no items on list)
then the open in admin mode notice.
I have tried everything I have found on the internet for 3 days.
View 3 Replies
Mar 14, 2011
I want to edit my code while debugging. Some projects i am able to work but in some rojects i am not. When i edit my code I got the following error:"Changes are not allowed while code is running or if the option "Break all processes when one process break' is disabled. The option can be enabled in Tools, Options, Debugging."I tried to do as per the above instructions but still i am getting the same error. Any one know the solution plz help me. By the way i am using Windows application and using VS 2008
View 2 Replies
Oct 13, 2010
I want to use the web.config transformation that works fine for publish also for debugging.When i publish a web app, visual studio automatically transforms the web.config based on my currenc build configuration.How can i tell visual studio to do the same when i start debugging.On debug start it simply uses the default web.config without transformation.
View 5 Replies
Dec 22, 2010
I have IE V 6 and firefox V 3.6 installed on my computer, when I debug my website with asp.net by Visual studio 2008 it shows my page in IE V 6,I want to debug my site with firefox, because VB 2008 shows me this MSGhttp://www.mediafire.com/i/?i0r5b7mi260wcb3
View 3 Replies
Jul 11, 2010
I.E. is not my default browser (Google Chrome is). However I would like to use I.E. as my browser when debugging from within VS2010. How do I tell VS2010 to use I.E. as the session debug browser without setting I.E. as my default browser?
View 1 Replies
Jul 28, 2010
Is there any way to debug, or just simply run an ASP.Net page or project without using Local Host? F5 or Ctrl F5 sometimes load the page fairly fast and sometimes it just does not happen. (At least not within my span of patience.) It seems that when it stalls, if I close the browser or click Stop Debugging, and then try again, it happens! But it is never consistent and usually frustrating.
View 2 Replies
Nov 13, 2010
i have 2 problems with running&debugging my web projects using visual studio 2008 pro :
1.when choosing to run without debugging , IE is being opened (which is ok , since i chose it to be the default one to be opened via VS ) , and yet when i close IE , it is being opened once again .
2.when choosing to debug , visual studio crashes and IE is being frozen (can only be killed via task manager) ,even when i don't have the "debugger;" string in the javascript code.
i've tried to re-install VS , and also uninstall it and then re-install it, but it didn't help. i have windows xp sp3 home edition 32bit. what should i do? EDIT:about #1 , it seems that from some reason, VS didn't install "Microsoft Visual Studio Web Authoring Component" , and this is also why i had another problem of not being able to use the design/split mode . after installing this component, it seems that IE doesn't run twice anymore. however, i still have crashes of VS when trying to debug (problem #2) ,even thogh script debugging is enabled on IE. the weird thing is that on maxthon2 , which uses IE engine, debugging works just fine.
View 2 Replies
