All of examples on web assume the remote server which we are going to debug remotely is on the same network. I have only a static IP address and using RDP I connect to server.
I've installed Remote Debugger on remote machine but cannot set the static IP address as Qualifier in visual studio -> debug -> attach to process
I'm trying to debug my web application on my localhost machine in Visual Studio 2010 and I keep getting this error: "unable to start debugging on web server. The Microsoft Visual Studio remote debugging monitor(MSVSMON.exe) does not appear to be running on the remote computer."
Is there a way I can turn this off as I'm not trying to make any attempts debugging remotely.
Overall debugging works, but each step through code takes dosens of seconds.
I've already closed all additional windows like stack trace,watches,autos; deleted all breakpoints.
server and dev machine are located in different domains, so i set up local user on both, with matching password. remote debugger is running as service.
looking at security log, I found quite a lot of entries about remote debugging account logging in (record about every minute).
how i can speed up remote debugging?
dev computer: quad core, 8 Gb mem, win 7 x64 , visual studio 2010 ultimate target server: asp.net website , 2xdual core xeon, 2Gb mem, remote debugger 2010communication channel: vpn , 5 mbit , latency about 20ms. (seems that debbugging never uses more than 20 kb/s)
I'd recently installed Windows 7 Ultimate 64 bit, and after I did this I cannot debug (or simply run without debugging) my ASP.NET applications (I use VS 2010). I'm getting message: Navigation cancelled.There seems to be a problem with the localhost. I'd checked the HOSTS file - it's configured correctly, I compared the settings with my other machine where I don't have this issue.
View 12 RepliesI have a precompiled website deployed in a remote test server. I want to debug the site from my computer. Following page says that the compilation should be performed with symbolic information.
[URL]
I had compiled my application in debug mode.
Unfortunately the breakpoints are not hit even with a copy of the precompiled website deployed in my local IIS. Following were the actions done with the local copy.
1. Requested the Page
2. Opened the source code and attached visual studio to aspnet_wp.exe
3. No break points are hit( I can see visual studio giving the hint- The breakpoint will not currently be hit. No symbols have been loaded for this document.)
I get this error when I hit F5 in VS 2008. I have checked that Windows authentication is enabled on the site and it is. I can mannully attach the debugger to the IIS process and it works. What could be wrong? I have tried alot of things without success.
View 2 RepliesI have a problem with Visual Studio 2010. When I start debugging it works slowly.
Internet Explorer opens, but the website loads extremely slowly.
My workmate and me work on the same project and he doesn't have any problem like that.
My hardware is 4G memory + Intel Core i5 CPU 3.20 GHz.
I stopped my anti-virus program but it couldn't be resolved.
i have problem with Visual Studio 2010 on Windows 7 x64. When i started asp.net site debugging, it stoped working. Only solution is restarting IIS.
Have anyone experiences with this?
When I am actively developing it is extremely cumbersome to write some code, fire up the debugger to test said code, wait a minute for the debugger to start, look at the page in the browser, stop the debugger, edit the code, rinse, lather, repeat. I can get around that by using CTRL-F5 and CTRL-SHIFT-B during development but I lose all the benefits of the debugger. Is there a better way to use the debugger, or something else I can do to get quick rebuilds and use of the debugger? I/we do write unit tests, but you also need to test your app in the browser so please no "you shouldn't have this problem if your unit tests were written properly"
View 5 RepliesCan i use web developer express 2010 to deploy applications or is it still in Beta?
View 1 RepliesHow do I connect to a remote site in IIS 7.5 using vwd 2010? vwd 2010 appears to be looking for deprecated software instead of the IIS 7.5 supported protocol using webdav. My application uses a cookie authentication from a central corporate authority and nothing but a legitimate URL is going to work during debugging. There is almost no information in a google search and the only forums.asp.net post from last year says it isn't possible. If MS is no longer supporting FPSE in the new versions of IIS, then what is vwd 2010 doing looking for it--is there a patch or module of some kind that is available to enable webdav access?
View 4 RepliesI'm creating a website in Visual Studio 2010. I would like to use Visual Studio for C# debugging, but it also uses Visual Studio as JavaScript debugger. Is there a way to disable script debugging for Asp.Net website projects? I run my projects by hitting F5 in my Visual Studio. (I've noticed that when I attach the debugger manually, I can specify the type of stuff I would like to debug.) Note: I would like to debug, but not with Visual Studio. The developer toolbar is enough.
View 3 RepliesI am debugging an ASP.Net C# application in Visual Studio 2010, the application is running and execution is currently stopped at a breakpoint. How can I stop the page execution without "Terminate All" or killing the debugging process altogether, similar to what would happen if an unhandled exception was thrown? The "Break All Cntl+Alt+Break" option is grayed out in the Debug menu.
I want to stop the app from running but not have to go through a compile/start again. EDIT: I want execution to stop, not break, so that the page finishes loading and I don't continue running the application from the breakpoint forward. I've looked through the Breakpoints panel, the Debug menu and have right clicked all over but still haven't found the right option.
I just started using VWD 2010 and I used Copy Web to upload the site to the server. However, whenever I try to upload a new version of a file that I've already uploaded, the upload fails, with this error in the log (as an example):
Copy from 'C:UsersLouDocumentsVisual Studio 2010WebSitesgenusus10 ools' to 'ftp://69.67.214.24/web/tools' started at 10/6/2010 4:00:33 PM.
I have been ising TFS 2010 with VS 2010 Ultimately for a couple of months now. I have a client who is using Visual Web 2010, does anyone know if this integrated with TFS easily?
View 1 RepliesI have my local Dev environment VS2K8 (ASP.NET) and our Dev server with no Dev tools. I have an app that runs just fine locally, but once I move to the Dev server I get an error. Another part of the problem is that I am moving the compiled dll for the website so I am not even getting the .cs line in the event log so it is very difficult to debug on the Dev server.
View 1 RepliesDebugging using the ASP.NET Development server is extremely slow to initialize. The behavior I'm getting is that if I launch the DevServer from VS2008, the first attempt to load a page takes minutes. After that, it's fine. Before the first page load, the DevServer UI responds to input normally (I can bring it up from the status area, use its context menu, and move the window around) until the first page load comes in. Then it shows the busy cursor (spinning blue ring) for 2-6 minutes before finally completing. There is no significant processor or I/O activity during this. After that, it runs normal speed, quite fast.
View 2 RepliesI tried to install Visual Studio Prof 2010 trail version in my system, but i got an error saying 'Please remove/uninstall Visual Studio 2010 load test controller' to proceed installation. i uninstalled my previous VS2008 software from system and i could not find anything like 'Remove/Uninstall Visual Studio 2010 load test controller' software in my Add/Remove Programs.
View 1 Repliesi want to know how do i deploy ASP.NET web applications on client machines which runs with the visual studio development server rather than configure it in the IIS on the client machine? I know its possible and telerik also uses this approach.
View 1 RepliesWhen debug a project, then error message show:
"Error while trying to run project : Unable to start debugging on the web server. The project is not configured to be debugged."
Now that I am playing with NHibernate I am getting a lot more YSODs as I am learning it however I seem to get this error sometimesafter a YSOD:This webpage is not available
The webpage at http://localhost:49497/ might be temporarily down or it may have moved permanently to a new web address.Error 139 (net::ERR_TEMPORARILY_THROTTLED):
Unknown error.Is there any way to disable this because I have to wait a few minutes every time and that is a pretty big killer is productivity?
I am getting an error "Unable to start debugging on the web server..." while running as web application in VS2005. But the error seems only for this application. I created a test application, both in VS2005 and VS2008, and found no issues in running these applications.
View 1 RepliesI used to have nice development environment at XP for .Net web application development. I have now installed Windows 7 and going to take it as my new machine. I already installed VS2005 and I'm able to
build a project. IIS is working fine and I'm able to open the web application in the web browser. Windows firewall is Off.When I click Start Debuggin on Visual Studio 2005 on Windows 7 I get following error:Unable to start debugging on the web server. Unable to connect to the web server. Verify that the web server is running and that incoming HTTP requests are not blocked by a firewall. What could be wrong? Something to configure in the IIS?
I just started getting the error message "Unable to Connect to the ASP.net Development Server" when debugging a website with VWD 2008 (everything was fine in the past). My system is Windows Vista with Windows Live OneCare firewall. I have reviewed other postings related to this problem, and they indicate firewall setting problems - settings not allowing VWD internet access. However, my settings on the "Windows Live OneCare Firewall Advanced Settings" tab specifically allow VWD.
View 5 RepliesUnable to start debugging on the web server. The IIS worker process for the launched URL is not currently running.I'm running Windows 7 64 bit, VS 2008 sp1.When I first try to debug I get the error msg above. I wait a few minutes (presumably some service is starting) and debugging will start but no breakpoints are recognized.Some of the things I've tried:Changing the binding of my site from a static IP to "*".
Enabled windows authentication.made sure localhost = 127.0.0.1 in the hosts file.The website was built under windows xp and whatever version of IIS ships with xp. My web config has no errors that I know of but might be missing something required for iis 7 (??)