I just started using VWD 2010 and I used Copy Web to upload the site to the server. However, whenever I try to upload a new version of a file that I've already uploaded, the upload fails, with this error in the log (as an example):
Copy from 'C:UsersLouDocumentsVisual Studio 2010WebSitesgenusus10 ools' to 'ftp://69.67.214.24/web/tools' started at 10/6/2010 4:00:33 PM.
I have a Windows Server 2008 x64 to develop applications, I installed the remote debugger rdbgsetup_x64.exe from
http://www.microsoft.com/downloads/details.aspx?displaylang=es&FamilyID=440ec902-3260-4cdc-b11a-6a9070a2aaab (spanish) Run the setup wizard, use the LocalSystem user to run the service and allows any computer to connect to the debugger.The configuration of the firewall is off.The configuration of the firewall with advanced security is:
inactive domain profile
inactive private profile
Inactive Public Profile
I found that the w3wp worker process runs on 32 and msvsmon runs 64.Now the client is a Windows XP x32 with Visual Studio 2008 SP1.either constructing a web application to check the operation of the treatment and get the following error: Unable to start debugging on the web server. The web server does not support automatic attaching This is Most Likely Because the web site is using ASP.NET version 1.0 or 1.1. Upgrade the website to ASP.NET 2.0 or manually attach to the web server process using the 'Attach to process' dialog. "
My website application is developed with Visual Studio 2008. The programming is written and tested with a project saved on my local hard drive. Afterwards the program is transferred to my http site with the Copy Web Site function of VS 2008. Previously Visual Studio always knew the location of the remote web site. It always started the Copy Web Site function with my source site as the http site and the remote site as the site on my hard drive.
Recently, Visual Studio demands that I enter the remote site. Of course, I can do this and cause the Copy Web Site function to work. However, when VS knew the remote web site, it could easily notify me as to what changes had occurred on the Remote site since the last Copy Web site function. This helped me in determining which files needed to be copied to the http Source web site. How can I permanently link my hard drive file location as the source site in the Copy Web site function of Visual Studio 2008?
is it possible to convert whole visual studio 2008 web site project to visual studio 2010 web site project
my current project references
i have a very annoying iis problem
iis server stops working until app pool is recycled
i am hoping that new visual studio (net framework 4.0) may solve this very annoying unsolveable problem
I am getting the following error when I try to establish ftp remote connection using the 'copy web site' feature on visual studio 2005.
unable to open the web 'ftp://209.*.*.*/httpdocs'. The computer is disconnected from the network.
Why can't I connect to the remote site on visual studio 2005? I can do the same thing on Dreamweaver with no problem. I can ping the IP successfully. I can open the ftp URL on a web browser with no problem.
fter upgrade to Visual Studio 2010 my web forms targeted to .NET Framework 3.5 that using master pages aren't correctly managed by designer.For example, master pages that contain a ValidationSummary produce an error in design mode in web form that is using that master page.To reproduce, create a new ASP.NET WebSite for the .NET Framework 3.5 and add a master page like this (headers omitted):
[Code]....
then create a new Web Form that use the previous master page and switch in design mode.
In my VS 2010 Pro I see this error when ValidationSummary is rendered: Error creating control ValidationSummary1 - Failed to create designer 'System.Web.UI.WebControls.ValidationSummary, System.Web, Version=4.0.0.0,...'
How do I connect to a remote site in IIS 7.5 using vwd 2010? vwd 2010 appears to be looking for deprecated software instead of the IIS 7.5 supported protocol using webdav. My application uses a cookie authentication from a central corporate authority and nothing but a legitimate URL is going to work during debugging. There is almost no information in a google search and the only forums.asp.net post from last year says it isn't possible. If MS is no longer supporting FPSE in the new versions of IIS, then what is vwd 2010 doing looking for it--is there a patch or module of some kind that is available to enable webdav access?
View 4 RepliesI have loaded Web Site from HDD. Now trying attach it to process WebDev.WebServer.EXE. But in Visual Studio 2010 Web Developer Express edition of VS not exist tool Attach To Process. Is it normal? if yes,
View 1 RepliesOverall debugging works, but each step through code takes dosens of seconds.
I've already closed all additional windows like stack trace,watches,autos; deleted all breakpoints.
server and dev machine are located in different domains, so i set up local user on both, with matching password. remote debugger is running as service.
looking at security log, I found quite a lot of entries about remote debugging account logging in (record about every minute).
how i can speed up remote debugging?
dev computer: quad core, 8 Gb mem, win 7 x64 , visual studio 2010 ultimate target server: asp.net website , 2xdual core xeon, 2Gb mem, remote debugger 2010communication channel: vpn , 5 mbit , latency about 20ms. (seems that debbugging never uses more than 20 kb/s)
It happens frequently when I try to copy & paste code inside VS 2010 with following message:
insufficient available memory to meet the expected demands of an operation at this time, possibly due to virtual address space fragmentation. Please try later.
and I check the memory usage with taskmanager on my computer. It is fine.
In order fix it, I need to close VS 2010 and restart again.
I downloaded a trial version of Visual Studio 2010, created a new c# Solution and then wanted to add an ASP.NET Web Site. I am Folllowing an example in a book: ASP.NET 3.5 Enterprise Application Development with Visual Studio 2008.In the book they write that a template for createing an c# ASP.NET Web Site would be found, but whereever I search for o template in VisualStudio I cant find that for c#, I could find it for VisualBasic but that is not wath I want!
View 1 RepliesI used to deploy developed web parts to a remote sharepoint site by Build->Deploy menu inside Visual Studio 2008 months ago ( I am not a regular web part developer). My network engineer also asked me how to deploy web parts without stsadm commands. anyway now I can't. Visual Studio keeps complaining that the specified site doesn't have sharepoint site contained. "No SharePoint Site exists at the specified URL."
After googling, it is said web parts can't be deployed to remote sharepoint sites from visual studio. Only can to local site. However I did it before. Visual Studio 2008 service pack or hot fix made this feature (remote deploy) removed? Or is there any workaround?
I have deployed my site in Win 2003 server. In this, it copies file from Another server and copies it in local. It is working with my local computer, but not in the server i have deployed. I hope access credentials may be the first reason. But are there any other reasons for this.
All of examples on web assume the remote server which we are going to debug remotely is on the same network. I have only a static IP address and using RDP I connect to server.
I've installed Remote Debugger on remote machine but cannot set the static IP address as Qualifier in visual studio -> debug -> attach to process
I am struggling to publish a site built (and working locally) using VWD 2010 Express to a production server.I realise that this is because I don't understand enough about the relationship between the website and SQL server and I certainly don't know enough about the way SQL server works in general. Can anybody recommend some learning resources - books, tutorials, vids etc, that explain the background and in particular address the issue of how to publish to a production server.
View 2 RepliesI have published my website using VS2010 and then selected FTP Site.Problem is that it does not show me update status. and takes too much time as compare to other FTP client. Is there any way or plugin for visual studio 2010 so i can build and directly publish that on FTP server.
View 2 RepliesI've tried all kinds of searches on this site and with Bing and don't seem to get any hits that meet my condition. So pardon me if this is a rather basic question. I'm rather new at ASP.NET programming.I want to experiment with putting up to a live site. GoDaddy gives you free hosting if you get the URL from them. The catch is the hosting only supports IIS 7.0 with .Net 2.0/3.0/3.5. I've uploaded all kinds of plain websites with no problem. So in Visual
Studio 2010 I selected the following options while creating a new project:
<customErrors mode="Off" />
<!--<compilation debug="true" targetFramework="4.0">-->
<compilation debug="true" >
<assemblies>
<add assembly="System.Web.Abstractions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
<add assembly="System.Web.Routing, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
<add assembly="System.Web.Mvc, Version=2.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
</assemblies>
</compilation>
I tried various solutions offered on the web for other issues like setting References "Copy Local = true" to upload various binaries.
I am facing a problem reated to web services. A customer is running his website on an old server running .Net Framework version 1.1. We would like from this site to call a Web Service, how can I do that. I have Visual Studio 2010 intalled on my machine and when I use the option "Add Web Reference" the generated files/folders seem to not be compatible.
View 1 RepliesI tried copying the .aspx and .aspx.vb files from my existing VS 2008 web site directory into the VS 2010 project directory (which is how I converted projects from VS2005 to VS2008), but that doesn't seem to make the files appear in the project/solution in VS 2010.So, I've got this site I built in VS2008, and I want to start editing it in VS2010. What's the best way to do this?
View 1 RepliesWhen I put 2010beta on my computer, made a new project and ftp'd to my site and it was downloaded, then I (stupidly) selected the option in a popup to update my site to the new ASP, what changes were made? How can I change/undo this to make my site work again?
I had the site built and i maintain, know very little coding...
1. What is the best site to host an ASP.NET Web Application which contains a login page, members area, and specified user accounts?
2. How do I connect my created web site to a hosting site such as GoDaddy.com or other?
I tried to install Visual Studio Prof 2010 trail version in my system, but i got an error saying 'Please remove/uninstall Visual Studio 2010 load test controller' to proceed installation. i uninstalled my previous VS2008 software from system and i could not find anything like 'Remove/Uninstall Visual Studio 2010 load test controller' software in my Add/Remove Programs.
View 1 Repliesinstalling visual studio 2010 pro RC in windows Xp SP3 and getting a message prompt : invalid windows installer package contact vendorlog file says
Error Message:
[02/22/10,17:09:07] Microsoft Application Error Reporting: [2] CMsiComponent::Install() expects the setup file for Microsoft Application Error Reporting, but the file failed verification.
[02/22/10,17:09:07] setup.exe: [2] ISetupComponent::Pre/Post/Install() failed in ISetupManager::InternalInstallManager() with HRESULT -2147467259.
[02/22/10,17:09:08] VS70pgui: [2] DepCheck indicates Microsoft Application Error Reporting is not installed.
I keep watching instructional videos that utilize the VWDE 2008, which apparently did NOT start web projects with a site master. It only created the defaults but did not create a site master nor did it create the directives in the @page.
I'd like the option of doing this in 2010. Is there some configuration setting that controls this?
I'm trying to debug my web application on my localhost machine in Visual Studio 2010 and I keep getting this error: "unable to start debugging on web server. The Microsoft Visual Studio remote debugging monitor(MSVSMON.exe) does not appear to be running on the remote computer."
Is there a way I can turn this off as I'm not trying to make any attempts debugging remotely.