Using VS2010 Pro, I started up an web site and got the message "WebDev.WebServer20.exe has stopped working" - a very similar problem was reported at
[URL]
I checked C:WINDOWSassembly and found that System 2.0.0.0 was missing (again!), reinstalled it but still got
""
System.ArgumentOutOfRangeException was unhandled
Came into work this morning and discovered that my local asp.net developmentn server has stopped working. Im getting the following page :
[Code]....
Im running visual studio of my personal PC withing my company's network.
I had the strangest bug yesterday while trying to debug in vs.net 2005....
I had an '05 web application. I clicked the "Run" button to start debugging, and the webpage popped up fine. I could run through the pages fine. Everything seemed fine....UNTIL!
Until I tried to start inserting breakpoints into my code. The application ignored them. In addition, I noticed my little green visual studio "Start Debugging" arrow (which is normally greyed out while in debug mode) was green. It was as if visual studio completely detached itself from my website I was trying to debug.
After playing around with it for a while, I realized I also had a vs.net 2008 solution open as well. My '08 solution wasn't in debug mode or anything, it was just sitting there open. I just happened to close it, not thinking anything of it, and presto! My 2005 debugger started working again!
So basically, I can't debug an '05 solution (or at least a web solution, as that's all I tried) while I also have an '08 solution open.
i have installed latest vs 2010 ultimate on windows 7
it works fine but as i want to close a website it sayas vs has stopped working restart/debug
what should i do?
I recently ran into some strange problems. Changes to files that are not code-behind (and not gets compiled to a DLL) should not require you to recompile the whole website, and this has never been I problem for me. These should actually get compiled dynamically when you first access the resource, e.g. the first time when browsing an updated aspx-page in the browser.
But yesterday, during development of a website, I noticed that even the smallest changes in html, javascript or anything in the .aspx-files doesn't get reflected when I save and reload the page in my browser. Rebuilding doesn't help either, actually I'll have to do a "Rebuild All" (in Visual Studio 2008) in order to see the changes. This applies to all aspx-files in my project.
I tried with minor changes on files in another web application project on the same server, and there it works as it should. Something must has happened to this particular application, but I cannot figure out what. Do you have any ideas on how to solve this?
I recently ran into some strange problems. Changes to files that are not code-behind (and not gets compiled to a DLL) should not require you to recompile the whole website, and this has never been I problem for me.These should actually get compiled dynamically when you first access the resource, e.g. the first time when browsing an updated aspx-page in the browser.
But yesterday, during development of a website, I noticed that even the smallest changes in html, javascript or anything in the .aspx-files doesn't get reflected when I save and reload the page in my browser.Rebuilding doesn't help either, actually I'll have to do a "Rebuild All" (in Visual Studio 2008) in order to see the changes. This applies to all aspx-files in my project.I tried with minor changes on files in another web application project on the same server, and there it works as it should. Something must has happened to this particular application, but I cannot figure out what.Do you have any ideas on how to solve this?
Currently this is the location of my WebDev.WebServer.exe -> C:Program Files (x86)Common FilesMicrosoft SharedDevServer9.0WebDev.WebServer.exe
I want to change it to -> C:Program Files x86Common FilesMicrosoft SharedDevServer9.0WebDev.WebServer.exe
Notice that the new location has no parentheses (because this might be the cause of an oracle connection problem I'm having (using Oracle.DataAccess))
I'm guessing simply moving it to the new destination will cause some problems, so what will I need to do to the Visual Studio 2008 configuration?
I wantto make a slower transmitting/transferring data speed for debugging issues.(no threading sleep is not my answer) searching a way to limit webdev.webserver speed (bandwidth) ?
for example maybe checking on "custom web server=webdev.webserver /BandwidthLimit=128bs"
I have running my application. some error is displayed at every time. what is the meaning of this error
"WebDev.WebServer.exe has encountered a problem and needs to close.we are sorry for the inconvience. If you were in the middle of something , the information you were working on might be lost. "
I'm not sure what happened, I didn't change any settings. For example, i could type the following:
a{
then hit return, and get
a
{
Now though nothing happens. It's not formatting like it used to. where I can set this or switch it back? I checked Tools > Options > CSS but couldn't find anything there that fixed it.
I have a zillion warning messages when I view my webform "Validation (): Element 'menu' is not supported" and every "<asp:WhatEver" tag has a green squiggly line under it.
It looks like this:
I'm using VS 2010 Pro, and have tried reinstalling it.
I have a solution that was originally created using VS 2008. I have quite a few unit tests that all passed when ran in VS 2008.
Yesterday I opened this solution in VS 2010 and converted it using the wizard. The solution built just fine, it runs just fine, BUT now all tests that access the db fail. I get the same error on every test (below).
"The runtime has encountered a fatal error. The address of the error was at 0x5b3b5ad7, on thread 0x19a4. The error code is 0xc0000005. This error may be a bug in the CLR or in the unsafe or non-verifiable portions of user code. Common sources of this bug include user marshaling errors for COM-interop or PInvoke, which may corrupt the stack."
In test classes that use ClassInitialize() and ClassCleanup() methods, all the tests fail. All tests fail with the same error, "The agent process was stopped while the test was running." Tests in test classes that do not utilize ClassInitialize() and ClassCleanup() (these tests do not hit the database) all pass.
When this was a VS2008 project all 153 tests passed. No changes have been made to these tests, other than converting the project to a VS2010 project.
I've been playing around with one test class. I commented out the ClassInitialize() and ClassCleanup() methods. I rewrote one test method and mocked everything. I tried running just that one test. I still got the "The agent process was stopped while the test was running" error.
Visual Studio 2010, version 10.0.30319.1 RTMRel
Test framework: integrated VS 2010 MS Test
Mocking framework: Not using mocking, I have a db that is destroyed and recreated in MyClassInitialize(), it is populated with known values. Yes, I know I should be using mocking, but this is an older app and it has not been updated with all of the new bells and whistles yet.
DB Framework: NHibernate
Target Framework is 3.5 for all projects in this solution except for the test project.
The target framework is 4.0 for the test project. I tried changing it to 3.5, it will not let me.
"Attempted re-targeting of the project has been canceled. You cannot change the specified .NET framework or profile for a test project."
I just recently upgrade my asp.net web project from visual studio 2005 to visual studio 2010. The upgrade was successful with no problems however im missing some features with this project. The One Click Publish feature(which is greyed out) in the header area of Visual Studio 2010 and the Add Config Transforms feature which is no where to be seen when you right click on web.config. When i create a new web project straight from visual studio 2010, these options work fine.
View 1 RepliesI am using vs2008 pro. my problem is that javascript debugger is not working on mozila firefox but working fine on IE8.
View 1 RepliesUntil the Dec 29th my website was working fine. Then My fileupload problems started happening. My fileupload page would simply quit and say the page can not be found. I maximized all my timeout settings and that did not work. I called my hosting company and apparently they have no problem using my page to upload files from their geographical area. So then I concluded it might be a network problem. I ran a trace route and could not really figure out where the problem was. So, I have no idea what is going on. Is it possible that my site is being blocked by some black list out there somewhere?
View 3 Repliesis it possible to convert whole visual studio 2008 web site project to visual studio 2010 web site project
my current project references
i have a very annoying iis problem
iis server stops working until app pool is recycled
i am hoping that new visual studio (net framework 4.0) may solve this very annoying unsolveable problem
Am in the middle of developing 2 projects and my AJAX Toolkit has stopped working, which is also stopping my designer filers being generated. Have the same problem in both projects. A sample error is below: Warning 3 Generation of designer file failed: Unable to create type 'cc1:CollapsiblePanelExtender'. Could not load file or assembly 'System.Web.Extensions, Version=1.0.61025.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
C:UsersHuwDocumentsMy
Web SitesRegent2Regent2Master.Master 169 0 Regent2
I have a web app that allows users to upload images. Last week, all was well. This week, it appears the code is breaking. Here is the code:
Protected Sub btnUpload_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnUpload.Click
If FileUploadControl.HasFile Then
Dim month As String = ddlMonth5.SelectedValue
Dim year As String = ddlYear7.SelectedValue
' Dim whatis As String = FileUploadControl.PostedFile.ContentType
Try
If (FileUploadControl.PostedFile.ContentType = "image/jpeg") Or (FileUploadControl.PostedFile.ContentType = "image/pjpeg") Or (FileUploadControl.PostedFile.ContentType = "image/gif") Or (FileUploadControl.PostedFile.ContentType = "image/x-png")
Then
Dim fs = New FileStream(FileUploadControl.PostedFile.FileName, FileMode.Open, FileAccess.Read)
'save file with new size
Using image As System.Drawing.Image = System.Drawing.Image.FromStream(fs)
Using bitmap As New Bitmap(image)
bitmap.Save("C:WebsitesimagesCusRespData.jpg", image.RawFormat)
bitmap.Save("C:Websitesimages" & month & year & "CusRespData.jpg", image.RawFormat)
End Using
End Using
StatusLabel.Text = "Upload status: File uploaded!"
fs.Close()
fs = Nothing
Else
StatusLabel.Text = "Upload status: Only .jpg,.jpeg,.gif and .png files are accepted!"
End If
Catch ex As Exception
StatusLabel.Text = "Upload status: The file could not be uploaded. The following error occured: " & ex.Message
End Try
StatusLabel.Visible = True
End If
End Sub
On the development side, I see this error: The file could not be uploaded. The following error occurred: Could not find a part of the path. On the production side, this occurs: The following error occured: A generic error occurred in GDI+.
I've just upgraded a visual studio.net 2003 project (asp.net 1.1) to visual studio.net 2010 (asp.net 4.0). I'm encountering a problem with viewing Crystal reports. I'm using Visual Studio Development Server as a Web Server.
When I try to create a new report (via code that worked fine previously) the line below causes the webserver40.exe to crash.
Protected WithEvents MyRep As New CrystalDecisions.CrystalReports.Engine.ReportDocument
I've got Crystal Reports 11 installed.
I'm just getting started with MVC and I created a new MVC 2 C# project. Visual studio defaults it to .net 4 but since my hosting provider is still on 3.5 I went into properties and set my project to target .net 3.5. However when I did this a piece of my code stopped working.
<%: ViewData["result"] %>
I get a compilation error saying
CS1525: Invalid expression term ':'
[code]....
AJAX :: pageLoad suddenly stopped working?
I'm using IE 8 v.8.0.6001.18882
After upgrading ie my login form that uses forms authentication stopped working.
After studies find that IE8 has problems with the authentication cookies.
With all other browsers work perfectly.
My settings in web.config.
[Code]....
I tested all the values of being the only one that works is the UseUri but I do not control cookies in this way.
I have an HttpHandler which takes care of 404 errors, which I implemented years ago as a way of doing url routing. If the request maps to a valid page, it redirects to that page. Otherwise, it returns a 404. (I know I should start using the new routing feature of asp.net 4.0, but that will take some time. I need to get this working asap.)
In IIS6, I have mapped the 404 error to "/404.ashx". In the web.config, custom errors are set up like so:
<customErrors mode="On" defaultRedirect="error.aspx">
<error statusCode="404" redirect="/404.ashx"/>
</customErrors>
and the http handler:
<httpHandlers>
<add verb="GET" path="404.ashx" type="myNamespace.PageNotFoundHandler,myAssemblyName"/>
</httpHandlers>
This has been working for years - it stopped working as soon as I changed the site to use asp.net 4.0. Everything was recompiled for 4.0, and there were no code changes.
Now, when I hit one of these urls that used to work, I get a blank page with a 404 error code. If I remove the IIS 404 error mapping, I get a regular old 404 page. It seems that the httphandler is not being called.
I have other http handler which are working fine. I figure there must be some configuration setting I missed or something like that. Naturally, this is a problem only on my production server, so I can't run it in the debugger to see what is happening.
I have some services deployed on [URL]I want to move them to [URL]. I have [URL] physically hosted & has its own web.config file. No inheritance issues...
I configured the subdomain (through my host--I don't actually own the web server) so that the subdomain is physically hosted & made sure it's running as an IIS application.
When the services lived on [URL], I used the following address prefixing in web.config:
[Code]....
Now that they're on [URL], I modified the web.config to read:
[Code]....
<serviceHostingEnvironment aspNetCompatibilityEnabled="true">
I'm having a problem with my 3rd cascading dropdown no longer displaying the list. I've obviously made a change somewhere but I cannot see it so I'm hoping some extra eyes will spot the problem. If it matters, I am using VWD 2010 Express, SQL Express, .NET 4.0I have checked the datasets and they are returning the proper list based on the input criteriahere is the pertinent code:
<asp:UpdatePanel ID="UpdatePanel1" runat="server">
<ContentTemplate>
District: <asp:DropDownList ID="DistrictDropDown" runat="server" Height="20px" AutoPostBack="true"
[code]...