Visual Studio :: Debugging Web Application Using 2008?
Jan 14, 2010
I got a probem when debugging web application using VS 2008. Here is the situation:I marked two breakpoints, one in the Page_Load event and the other on the button click event. When the debugger hit the breakpoint in the page_load event, everything was fine but when it hit the breakpoint in the button click event, VS 2008 suddenly stopped debugging. It seemed that the IIS worker process was terminated.I really don't understand this situation.
View 5 Replies
Similar Messages:
Sep 7, 2010
I have upgraded a Visual Studio 2005 Web Site in a 32 bit server to Visual Studio 2008 maintaining the same 2.0 framework in a 64 bit server with Windows 2008 R2 Server. The Web Site has several class libraries.
After porting to Visual Studio 2008 2.0 Framework using the Upgrade Wizard, I found that I was unable to hit a break point in the Project code behind files while I was able to in the class libraries. The bin folder has the dlls and the corresponding pdb files for the class libraries. I did start the Web site as an Administrator and made sure whole bunch of IIS7 properties are properly set.
I tried to rebuild the solution as a Web Application in Visual Studio 2008 and gave up that approach as I faced hundreds of error messages pointing to missing references and namespaces inspite of adding whole lot of references and namespaces to the Web.
View 12 Replies
Jul 24, 2010
I'm trying to debug sitecore 6 asp.net code using visual studio 2008 (Windows server 2003 OS), concretely i am trying to get breakpoints to work. I tried setting the breakpoint and then on VS, debug-> attach to process.. -> IIS web server process, but nothing happens when i browse to a certain aspx where a breakpoint is located at the beginning of the Sitecore.Web.UI.WebControl.DoRender method
I tried setting on the website properties home directory->configuration->debugging and check both client-side and server-side debugging but nothing changes. Tried stopping the website, recycling the appPool and restarting, reataching the debugger and nothing happens
View 2 Replies
Jan 23, 2010
I am having a problem with my Visual Studio 2008 debugger on Windows 7. When I press F5, my Visual Studio web server freezes, and the Visual Studio status changes to "Not Responding".
View 2 Replies
Mar 1, 2010
Visual Studio has integrated debugging in IE, when you close IE, it stops debugging, and if you stop debugging, VS closes IE.
I want it to do the same thing with firefox/chrome!
View 2 Replies
Jul 5, 2010
I have got a new personal computer and I would like to download the above. I would like to know if this is possible. If not what is the remedy.
View 1 Replies
May 5, 2010
I have a solution I have been working on over the last few weeks with a 3 or 4 projects in that used to build and begin debugging in under 10 seconds.The solution contains 3 dll's and 1 mvc project.
As of today, it takes about 2 minutes to start debugging, it keeps pausing on "loading symbols for ccpCodeProvider.dll".
I'm debugging on the internal vs development server, and I haven't changed anything since yesterday?I haven't ever used symbols before, and I'm not trying to debug the framework or anything, I just want my stupid web project to run.I created a new solution from scratch and added a random console app, and that also takes forever to debug.
View 2 Replies
May 20, 2010
I'm using Firefox as my default browser and I'm trying to debug java script in side asp.net page visual studio 2008 with Firefox browser.
how to enable script debugging in visual studio 2008 when using Firefox?
by the way, I installed JavaScript Debugger plug-in for Firefox.
View 1 Replies
Jun 9, 2010
I have an asp.net project in visual studio 2008I press F5 and the "test page" does not launch and I don't understand why.Looked at the properties for the site and "start action" is correctly set to "use current page"Similar question. assuming it automatically launched above, how does one open a 2nd instance of the current debug site (seems like their ought to be a "launch site" button?edit: I went back and launched VS as admin and it did launch the site. Maybe this is a security issue?
View 1 Replies
Jun 30, 2010
In Visual Studio 2008 while debugging an ASP.Net website I set a breakpoint in the codebehind page. I refresh the page or submit to call the method, the breakpoint is hit. Then I delete the breakpoint and continue execution. I make a change to the codebehind page and save it. I submit or refresh again and the deleted breakpoint is back! It is hit again, and I delete it again. I have tried delete, disable, nothing works it keeps coming back if I make a change to the page. It is extremely annoying and unproductive. The only way I have found to make the breakpoint permanently go away is to use the Debug menu Delete all breakpoints item, which is obviously less than ideal. I have been able to reproduce this on other developers machines also. What is going on here? Is this by design? Is it a bug in VS? How do I keep these zombie breakpoints from resurrecting?
View 4 Replies
Nov 4, 2010
I have alway tested/debugged my web applications by using f5 to "Start Debugging". Recently (yesterday) I have begun to start without debugging then attach the debugger to the webdev process if I needed to set breakpoints or anything. So far I haven't noticed much of a performance increase when not using the debugger. I am curious about how others save time when running locally.
View 3 Replies
May 28, 2010
How can I ensure that web application converted from 2003 visual studio to 2008 visual studio
to have two files as it is when create a web file in visual studio 2008.The web application is in Chsarp. I have converted these filesfrom 2003 to 2008 but they still have three files each.
View 4 Replies
Jun 3, 2010
I get this error when I hit F5 in VS 2008. I have checked that Windows authentication is enabled on the site and it is. I can mannully attach the debugger to the IIS process and it works. What could be wrong? I have tried alot of things without success.
View 2 Replies
Mar 7, 2011
I'm trying to debug my web application on my localhost machine in Visual Studio 2010 and I keep getting this error: "unable to start debugging on web server. The Microsoft Visual Studio remote debugging monitor(MSVSMON.exe) does not appear to be running on the remote computer."
Is there a way I can turn this off as I'm not trying to make any attempts debugging remotely.
View 1 Replies
Feb 9, 2011
I run the start debugging option...it runs successfully. but still is shows start debugging option is shown in the Visual studio 2005 IDE. And one more problem is ::I applied break points in one page and run the application. but those break points are not detected....
View 1 Replies
May 10, 2010
suddenly, with my Visual Studio 2008 I can no longer debugging my web applications (ASP.NET 3.5). I obtain this error: Unable to start debugging on the web server. Click Help for more information. Auto-attach to process [8360] w3wp.exe' on machine 'DELL' failed. The weird thing is that I haven't done special changes to my IIS.
View 1 Replies
Jan 6, 2010
Is there any tool for Visual Studio 2008 which can reformat ASPX code to make it more presentable (eg insert line breaks, format the lines so they wrap when necessary, etc)?
View 5 Replies
Jul 6, 2010
I'm about to start a new module in my existing web application project (already completed 3 modules), due to more data entry and volume of data handling my PM informed me to go this module on windows application (vb.net), but i'm requesting him to go with web application since i'm much familiar in web applcation and all my completed module on web.
But he is thinking on performance part too, if i get some idea / suggestion on the same so that i can clear and i will go with either option.
The module is Service Billing with LPO Control, Billing, Proforma, eBilling, eApproval, online billing etc.
View 3 Replies
Aug 10, 2010
I am trying to publish a website using IIS, I made a virtual directory and in this directory I've added all the webpages and configured the virtual directory but still I am not able to run my web application.
View 7 Replies
Dec 9, 2010
I am using visual studio 2008 and
i need to to a load test my ASP.net to check why users are gone slow when they are working during a pick time
how can i do a load test using Visual studio 2008
View 1 Replies
Apr 14, 2010
As stated in the title my web application builds successfully, although every time I run it in debug mode I get the following .Net error:
If I hit refresh then the application gets no more errors until I next start it up again, any ideas?
Here is my global.asax file:
<%@ Application Language="C#" Inherits="MyCompany.Web.MyApp.Shell.CustomWebClientApplication" %>
<script runat="server">
void Session_End(Object Sender, EventArgs e)
{
FormsAuthentication.SignOut();
}
protected void Session_Start(Object sender, EventArgs e)
{
if (Session.IsNewSession)
{
Response.Redirect(System.Web.Configuration.WebConfigurationManager.AppSettings["HomePage"]);
}
}
protected void Application_Error(Object sender, EventArgs e)
{
System.Exception oops = Server.GetLastError();
//Injection attack error handling
if (oops.GetBaseException() is System.Web.HttpRequestValidationException)
{
Response.Redirect("ErrorPage.aspx");
}
}
</script>
View 4 Replies
Mar 29, 2010
I want to develop a mobile web application in Visual Studio 2008.
I have 2 questions.
1) Should i use mobile web controls or Asp.Net controls for new application?
2) Wy there are no mobile Templates in VS 2008? Normally Microsoft replaces the the older technology with new one, but why it has just removed it ... ?
View 5 Replies
Mar 25, 2010
In VS 2005 we need to install patch or VS2005 SP1 to create "ASP.Net Web Application" project.
how to create "ASP.Net Web Application" project in VS 2008? (Not Website)
View 5 Replies
Sep 16, 2010
I have to integrate web application into website. What are the changes i have to do. I need information very urgently.
View 6 Replies
Aug 14, 2010
is it possible to convert whole visual studio 2008 web site project to visual studio 2010 web site project
my current project references
i have a very annoying iis problem
iis server stops working until app pool is recycled
i am hoping that new visual studio (net framework 4.0) may solve this very annoying unsolveable problem
View 2 Replies
